Wood cutters for a lathe: purpose and types of tools

FacebookTwitterOkGoogle+PinterestVk

Wood cutters for a lathe are designed for processing wooden parts on a special machine, which are widely used for the manufacture of furniture or interior elements. The construction market offers a wide range of different types of tools, which are selected based on the scope of use and the material of the wooden workpiece. Everything you need to know about wood cutters can be found in this article.

Special cutters are used as tools for working with a lathe, which have long handles so that the master can hold the tool firmly in his hands

Wood cutters for a lathe: purpose and design of elements

The main purpose of wood turning tools is manual processing of a part rotating in a special machine. The lathe used for these purposes is designed to impart rotation to the body. Wooden blanks, which are initially round in shape, are mounted on a lathe using two clamps. One clamp is connected to an electric motor, which sets the part in motion.

The choice of the type of turning cutter, its sharpening and condition largely determines the possibility of certain operations and the manufacture of parts of the required configuration

Important! On the motor side, the fixation must be rigid so that rotational movements do not occur at idle.

The cutters, which are fixed to the rotating mechanism, perform processing of the rotating body. Depending on the strength, shape and sharpness of the cutter, marks are formed on the wooden workpiece. This also determines the shape of the workpiece.

The design of a lathe cutter consists of a working metal part and a wooden handle. The working element conventionally consists of a blade, body and shank. The blade consists of a front, back and pointed angle. The size of the sharpening angle depends on the material of the workpiece. Most often, craftsmen use sharp corners when working with wood. The body is the main part for which the turner holds the cutter on the armrest of the machine with his non-working hand. The shank is a narrowed part into which the body of the tool goes. It is on this that the handle of the turning tool is attached.

The handle structure consists of a base and a neck. The base is the larger part of the handle that the turner holds with his hand. The neck is represented by a small cylindrical part with a metal fastening ring. It is designed to prevent the handle from cracking while being pressed onto the shank of the working part.

Wood turning tools consist of a back corner, a pointed corner and a rake corner.

Manufacturing and service

Making the cutter yourself

Many craftsmen, either wanting to save money or not trusting third-party manufacturers, prefer to use homemade carving tools. In principle, making a knife or chisel is quite simple, the main thing is to choose the right material.

The photo shows a hacksaw blade and a simple jamb knife made from it

The raw materials for our design can be used:

• A saw blade for wood or metal is an almost ideal blank for a jamb knife. During the manufacturing process, we cut off a piece of blade on a machine or simply break it off at the angle we need, and then form a cutting edge.
• The wood saw blade also has acceptable characteristics. The carbon steel used to produce such saws holds an edge well, which means that the cutter will not become dull even when working with hard wood.
• Before making a semicircular chisel, you can look “in the bins” for an unnecessary punch. To make a tool, we will only need to cut off part of the wall diagonally - and we will get a very convenient device for sampling wood.

An important part of any cutter is the handle.

The instructions for its manufacture are also not complicated:

• We take a block of hardwood and cut a handle out of it.
• We make a hole at the end of the handle, the shape of which corresponds to the shape of the shank of the metal part.

Gluing the blade into the handle

• We glue the cutting part into the handle, and then clamp the structure with a metal ring.

Note! Sometimes the handle is made of two halves. In this case, the blade can be additionally secured with screws or rivets, and gluing should be done in a vice or clamps.

Sharpening cutters

You can only get a decent result if you work with a perfectly sharp tool. And since even the softest wood dulls the blade quite quickly, sharpening wood cutters is definitely included in the “minimum program” of training for a novice carver.

To perform this operation we will need:

• Bars of different grain sizes - from coarse to fine.
• Old leather belt for straightening.
• GOI paste (or similar composition).

We do the work like this:

• First, we moisten a coarse-grained block, place the cutter on it at the selected angle and sharpen it using pressure from ourselves.
• We switch to a block with medium abrasive grain and repeat the operations until a clearly defined sharpened edge appears.
• We carry out the finishing on a diamond stone, removing the metal chamfer that appears on the tip of the cutter.
• Then we apply a layer of GOI paste (a composition based on chromium oxide) to the belt and polish the working part to a mirror shine.

Editing on the belt

Advice! Finishing on the belt can be done more often than the main sharpening - this way we can correct a slightly dull blade.

It’s easy to check the quality of our work: if the cutter cuts the newspaper without effort, it means we’ve done everything correctly, and we can start working on the workpiece.

Types of wood turning tools

Today on the shelves of hardware stores you can find several types of woodworking tools for lathes: rakes, meisels, chisels, scrapers, trimming cutters, bevel cutters, hooks, rings, combs.

The main purpose of the rafter is the initial, rough, rough processing of the workpiece. The blade of the tool has a special design and is presented in the form of a semicircle. It can be made from a semicircular groove or a thick plate. Using a rayer, the workpiece can be given an approximate outline of the future product.

Meisel is used for finishing and giving the product its final shape. The tool can also be used to cut off the final product from the remains of the workpiece. The shape of a meiser is similar to a jamb knife and is represented by a plate with an oblique blade, sharpened on both sides at the same angle. Using a reyer and a meisel, you can perform turning work of medium complexity. The workpiece is processed along the outer surface. In certain cases, it is possible to work with the internal cavity of parts.

Meisel cutter: a) left-hand sharpening; b) double-sided sharpening; c) right-hand sharpening

Other types of turning cutters belong to the shaped group of products. Chisels are designed for turning smooth surfaces. The blade of the product has a special shape and sharpening. To give the workpiece relief, you can use a special chisel with a knurled roller. Scrapers can have straight or curved cutters, which is convenient for scraping flat or cylindrical wood. This tool can also be used for roughing wood.

Parting cutters have spoon-shaped blades, making it possible to create cups or other semicircular designs. Oblique incisors are represented by grooved chisels, concave chisels and semicircular incisors. The hook and ring are designed to create a cavity of any configuration in the workpiece. The comb is used to create carvings and apply decorative marks and grooves.

Types of processing tools

The classification of wood cutters has many types, among which there are several main ones. A novice craftsman should first make several standard tools that make up any set of wood cutters. They are the ones who perform most of the operations. Lathes are usually equipped with such tools. If you need a cutter of a non-standard configuration, it will have to be made according to a pre-drawn drawing.

Main types of wood cutters:

• shaped;
• trimming;
• boring;
• cut-off

Shaped chisels are used for making wooden souvenirs, carving bowls, art products and various objects that have an ornate, complex shape. Their cutting part has the shape of a semicircle.

Using scoring cutters, corner protrusions and ledges are made in a wooden product. Boring tools are used to cut and bore holes, recesses and recesses. They are equipped with a small ledge, with which it is convenient to remove chips from the recesses.

A cutting cutter is needed to cut short pieces (rods) from a longitudinal part with a small cross-section. You can make any of the listed types with your own hands.

One of its classifications divides cutters by purpose: for rough or finishing. The first type of design consists of two cutting edges, the planes of which form an acute angle. In the second case, the cutter consists of one edge with a left- or right-hand sharpening. This tool is used to give the workpiece a flat and smooth surface. They are convenient for cutting off small protruding parts of wood.

To turn round products, chisels are made from pipes. Depending on what kind of processing is required, the edges can be smooth or jagged.

Cutters with a limiter (block) are needed for shaped processing of products from the ends. The limiter is adjustable in height so that the processing depth matches the specified one.

How to make wood cutters for a lathe with your own hands

Many craftsmen prefer not to purchase cutters in a store, but to make wood carving tools with their own hands. Meiser and reyer are easy to make. To do this, you can use waste material in the form of files and rasps. These products have the required dimensions, strength, material quality and steel grade. A sharpening machine is used to give the file the required shape. Then a turned handle equipped with a fastening ring is stamped onto the product.

Homemade turning cutters for wood processing: 1 - for deep processing, 2 - for clean processing, 3 - shaped turning, 6 - cutting off, 5 - boring, 6 - for turning balls, 7 - for end shaped turning, 8 - cutter with limiter

You can make wood cutters with your own hands from car springs or reinforcement bars. These materials have the necessary hardness. However, you must be extremely careful with this tool during its further use. The test should be carried out first on soft wood such as poplar or linden. Next, a visual inspection of the tool is carried out for cracks and chips. If they are missing, then homemade wood cutters for a lathe can be used for hardwood.

When making tools for working with wood, it is important to follow certain recommendations. The choice of body length should be based on the possibility of fully grasping it with the hand and resting on the armrest. Here you should also take into account the distance between the armrest and the workpiece and the margin for sharpening and wear. The optimal length is considered to be from 20 to 30 cm. The length of the shank should be calculated in such a way as to eliminate the possibility of it being pulled out of the handle.

Helpful advice ! If files or rasps are used to make cutters, the length of the shank should be increased by 1.5-2 times.

Each person will be able to make homemade cutters that will become an indispensable assistant for surface treatment

The thickness of the working part of the tool must be calculated taking into account to prevent its damage during turning of the workpiece. Therefore, this value should be maximum, which is especially important for large-diameter workpieces. The cutter handle must be at least 25 cm. If this value is smaller, then when performing the turning process the tool will be difficult to hold in your hands, which will negatively affect the quality of the work. You can study in more detail the process of how to make a wood cutter with your own hands on specialized websites on the Internet.

Sharpening wood cutters for a lathe

The quality of the processed workpiece largely depends on proper sharpening, namely on the geometry of the turning cutter. The sharpening angle is selected individually by each craftsman depending on his own skills, the hardness of the wood, the quality of the working tool, and the final desired type of the surface being processed.

For a beginning craftsman, the sharpening angle of the chisel and meiser should be 40 degrees relative to the working surface and relative to each side of the blade. For a reyer this value is 50-60 degrees. With increasing skill level, the sharpening angle can decrease to 20-35. The sharpening process is carried out on a special machine for sharpening turning tools, which is equipped with a set of wheels of various grain sizes and a velvet bar for manually straightening the blade.

Before sharpening the cutter, you need to properly fix it in the mandrel.

Helpful advice! A turner's tool set must contain cutters of the same type, uniform size, and having different sharpening angles. This will significantly speed up the work of the specialist and extend the service life of the products, since there will be no need to constantly resharpen the blade, depending on the type of workpiece being processed.

Tools with a sharper sharpening angle are used for rough cutting and hardwood workpieces. Cutting tools with sharper angles allow for better processing of the workpiece surface. It is used to speed up the turning process. However, in this case, the likelihood of damage to the blade and chipping of the workpiece increases. In addition, editing and sharpening wood cutters with sharp corners will be performed more often than elements with obtuse corners.

The approximate sharpening angle of the blade is formed at the stage of manufacturing turning tools before the hardening process begins. After the end of the heat treatment, sharpening is carried out using an abrasive wheel and is completed on a velvet block by hand finishing.

To prevent the appearance of burrs and chips on turned parts, it is important to use correctly sharpened cutters

Purpose of the chisel

When talking about chisels, we are usually talking about woodworking cutting tools.

Its versatility is expressed in a large number of jobs performed, including making recesses, cleaning grooves, chamfering, applying contour and relief carvings.

In addition, the tool is used for planing, and more specifically, for removing material of small thickness.

Which wood turning tools should I buy?

To work on a woodworking machine, it is better to have all the necessary tools. For this purpose, it is better to purchase not just one unit, but a whole set of elements. One of the popular and sought-after options is a set of turning wood cutters Enkor 10430. Here are eight elements of various profiles, which are made of high-speed steel.

The design of the product consists of a cutting part, a base, a wooden handle and a fastening ring. The cutting part with a metal base is rigidly and securely fastened into a wooden handle and securely fixed with a ring that prevents the blade from falling out when working with the product. Each cutter is equipped with a comfortable, long, varnished handle that is comfortable to hold with both hands.

The cutters are sold complete with a wooden box, which is equipped with slots for each element. The blades of the products are made of high-strength steel, which exhibits increased resistance to wear and can remain without sharpening for a long time. The tool allows you to process workpieces made of any type of wood, regardless of the hardness of the wood. High-quality sharpening of the blade allows you to process products of any shape. When using these cutters, labor productivity increases, which is associated with the possibility of increasing the spindle rotation speed without causing problems with the formation of chips and nicks. You can buy cutters for a wood lathe for 4,600 rubles.

Turning cutters Enkor HSS are equipped with accessories of various profiles and are made of high-speed steel

Another good option is the JET 19500118 lathe set of cutters. The blades are made of high-quality HSS tool steel. The set includes 6 cutters: grooved, semicircular, grooved extended, flat, cutting and oblique. The cost of the set is 7,000 rubles.

The cutting tools for the HSS NAREX wood lathe have proven themselves well. The blade is made of high-quality high-speed steel HSS, which is hardened to a hardness of HRC 64. The kit may include cut-off, semicircular and oblique products. The cost of a set of five elements is 7,500 rubles.

The German company KIRSCHEN is one of the leading manufacturers of tools designed for wood processing. The catalogs present a wide range of different types of chisels and wood turning tools, which are distinguished by their convenient and reliable design. The blades are made of special high-carbon steel. The tool can be used for soft and hard wood. A set of wood cutters or chisels for a lathe can be purchased for an average of 10,000 rubles.

The set of cutters for the JET lathe is made of high quality steel and also has carbide inserts

Every beginner and experienced woodworking master should have the necessary set of cutting elements in his arsenal. Before purchasing wood cutters, you should familiarize yourself with the characteristics of the products and choose the most appropriate option that can be effectively used for a specific task.

Related article:

Do-it-yourself homemade metal lathe: manufacturing and operation

Components and assembly. Selecting engine power. Creation of a machine based on a drill. Safety precautions, modifications.

Wood turning works

Wood turning is the artistic processing of wooden blanks. The turning process is very complex and labor-intensive, and consists of certain components: choosing a wooden blank and tool, determining the required rotation speed, turning and finishing.

A wood chisel is very useful in work that involves processing wooden workpieces

The size of the workpiece directly depends on the dimensions of the future product. If the design of a woodworking device includes a jaw chuck for a wood lathe, then 8 cm must be added to the selected length of the workpiece; if a machine spindle with a faceplate is used, 4 cm must be added. The thickness of the product must be at least 20 mm with a margin.

It is better to use hard wood as a material, such as ash, beech, apple, pear, hornbeam, walnut, oak and cherry. Products made from beautiful wood such as walnut, ash and apple, the texture of which has a pronounced pattern, will have a good aesthetic appearance.

Helpful advice! An adult white acacia tree has an incredibly beautiful texture, which in cross-section resembles malachite.

Using a machine and wood cutters you can create attractive and unusual decorative elements

The first step is to create a deck or blank. Next, the workpiece is installed in a lathe and rough processing is performed. This allows you to level the surface and eliminate all kinds of defects. Then the artistic processing of wood on a lathe begins. Using cutters, the product is given the required volume and surface relief. The appearance of the future element depends on this stage. Then the final finishing is performed, which consists of polishing the product and impregnating it with antiseptic agents. You can study all the features of the process in more detail thanks to the video “Turning”.

Woodworking tools

Typically, all types of devices designed for working on wooden surfaces are called cutters. This can include all cutting blades, saws, axes, chisels, specialty planes and more. Each of the tools is designed for a specific type of processing of a wooden workpiece.

Each cabinetmaker individually selects a tool that suits his needs and tastes. But if a person has no experience in wood processing and is just starting to engage in this type of activity, it is advisable to follow the recommendations of knowledgeable craftsmen.

How to properly operate a wooden lathe

A wooden lathe is widely used in the manufacture of furniture and decorative elements. The device differs in size grid, thanks to which the dimensions of the machine are determined depending on the purpose. You can choose a machine for a small project or choose a massive device for turning balusters, which are used in the manufacture of staircase railings or furniture elements.

When choosing a machine, you should pay attention to the length of the bed, which allows you to determine the maximum length of the bar that can be used when turning the workpiece. The diameter of the turning above the bed indicates the permissible value of the diameter of the wooden block. The horsepower value determines the power of the motor, thanks to which the maximum permissible weight of the product is selected without load on the machine and cutter. Engine speed should be taken into account when determining tasks for the machine. At low speed, a product having a continuous shape can be processed. Machines with a large number of full revolutions will polish the product at the final stage of processing in a matter of minutes.

Lathes vary in size from amateur models that are suitable for use on a workbench, to industrial ones weighing hundreds of kilograms

The weight of the machine determines the mobility of the device. Models made of a steel frame and cast iron bed are characterized by a fairly robust design and a strong platform for work, but require a stationary position. For high-quality and efficient operation of the machine, it is important to choose the right wood cutters, which should be easy to use and effective for a specific task.