A trimmer is an indispensable thing in the garden. If you want to maintain the beauty of your garden lawns, a trimmer will help you quickly cut the grass with minimal effort.
Like any other equipment, it needs careful operation. First of all, it is necessary to promptly replace the fuel and air filters.
At the same time, it is absolutely not necessary to send the equipment for service - anyone can cope with the task.
How to Clean the Trimmer Air Filter
Some tricks for working with a gas trimmer.
Useful material from which you will learn how to start a capricious gasoline trimmer that does not want to work!
Summer time has arrived, and lawn mowers are making their usual noise in the garden plots. Great tool, powerful and mobile. Using a gasoline trimmer, you can mow the grass and get rid of dried weeds. However, there are times when the lawn mower does not start, operates intermittently, or does not develop full power. There is certainly no time for work here! And as they say, you pull the starter handle more than you mow.
Difficulties with starting arise not only for seasoned lawn mowers, but also for new ones. What to do in this situation? There is only one way out - listen to the advice of experts and take advantage of their practical experience!
If you install a cable instead of a fishing line, without the possibility of releasing it, securely fixing the two ends of the cable and cutting them off by welding (a drop of melted metal keeps the cable from unraveling). Such a tool “cuts” the grass at once. Cuts down growth about a finger thick. He is not as afraid of stones as he is of a disk. There is, however, a problem: when worn, pieces of the cable threads break off, and these twisted wires remain at the mowing site. If you step on them, you can get hurt.
But the pieces of cable left on the field are not so bad. When a fishing line breaks, it weakens the dynamic impacts on the transmission and engine; a cable does not provide such an opportunity. The result is rapid wear of the brush cutter.
Also, the ignition coil in the electrical equipment may be broken. In this case, the brush cutter does not start, or it starts and works intermittently, and then stalls, or when “hot” it does not start at all.
You can check the serviceability of the coil in the same way as when checking the spark: unscrew the spark plug and lean it against the trimmer . If there is no spark when the starter jerks, or it appears every other time, you need to change the coil.
How to wash the air filter on a petrol trimmer, Izhmash Industrial Line GT 4350 brush cutter
Garden Trimmer
A lightweight and convenient trimmer for removing grass, and without smelly fuel or an annoying electrical cord that clings to everything it can. You can mow vegetation even in the most difficult to reach places, such as near a fence, border or around trees, without much effort and waste of time.
Benefits of a trimmer
Durable ABS plastic housing
will withstand shocks and falls
Powerful electric motor
copes with dry grass and large weeds
Telescopic handle
allows you to reach the most inconvenient places
Protective shield
protects your face and eyes from flying debris
Trimmer equipment
Trimmer:
1 PC.
Material:
ABS plastic
Telescopic handle:
1 PC.
Line:
24 pcs.
Shield:
1 PC.
Nutrition:
6 AA batteries (not included)
Garden Trimmer efficient and economical
Compare the Garden Trimmer to more expensive and cumbersome gas trimmers
Garden Trimmer
- Price: 1590 rub.
- Compact and lightweight
- Does not require handling skills
- Low noise
- Safe
- Runs on cheap AA batteries
Types and principle of operation of filters for trimmers
Modern lawn mowers use two types of filters – fuel and air.
- Fuel filter for trimmer
Even the highest quality fuel has various additives that quickly accumulate and damage equipment.
The task of the fuel filter in gasoline trimmers is to protect the device’s engine from various impurities contained in gasoline and oil.
Externally it is quite small in size. It is made from felt material. The manufacturer places compactly folded felt in a metal tip and places it on the intake tube inside the fuel tank.
Another placement option is in the line between the carburetor and the tank. Many trimmer owners even report overly thorough cleaning, so the material quickly becomes so clogged that it requires complete replacement.
- Gasoline trimmer air filter
Its main purpose is to retain dirt and dust entering the trimmer from the outside during operation.
When mowing, not only dust often rises into the air, but also small debris and chopped grass, which can quickly clog the equipment. A good filter will prevent engine damage, even if the air is very polluted.
Its location may vary depending on the trimmer model, but is usually located on the side of the device body under the protective cover.
The casing is fixed either with a bolt or with latches, which are very easy to open to remove the contents. The filter itself can be made in the form of a ring or a plate made of foam rubber, felt, or fleece.
READ How to Charge Cord In Trimmer
If you mow on average 1-2 times a week, then replacing it at least once a year will be enough. With more intensive use, inspection and replacement should be carried out more frequently.
Mazda 6 air filter replacement
To ensure proper operation of the powerful modern engines that are installed on the Mazda 6, ideal conditions are required. This statement also applies to the operation of the air purification filter.
The service life of an air filter installed on a car is limited to a mileage of 60 thousand km. The second limitation requires the filter to be used for no more than 4 years.
Air filter selection
Many drivers wonder how to choose the right air filter. To do this, you need to understand the principle of its operation.
Today you can find the following available types of air filters on sale:
- Inertial. This type of air filter has long been used in all types of vehicles, but the part has gradually been replaced by the most advanced paper and synthetic systems. Nowadays they are rarely found on turbocharged diesel engines. A significant disadvantage of this type of WF is its low efficiency;
- Inertial oil filters do their job a little better, but are also considered obsolete. The main difference is the use of oil, which settles at the bottom of the air filter and traps small dust particles;
- Today, paper VFs are considered the most common. Purification in these designs is accomplished by passing a stream of air through the corrugated fiber. A characteristic feature of such a device in Mazda 6 gh cars is considered to be a high degree of purification - 96%. Dust is retained inside the part, which guarantees better efficiency indicators
- Only VF filters with elements of synthetic materials surpassed paper filters in all characteristics. Such air filters are capable of retaining the maximum amount of dirt. Moreover, the part works longer and does not get wet
- Zero resistance water filters. As the main component, manufacturers use fabric pre-treated with a special compound. This design guarantees the least air resistance than simple cotton VFs.
Having carefully studied the information provided, we can conclude that the best option would be to purchase a paper disposable VF, and it would cost less than others.
Manufacturers of Mazda 6 2008-2011 model years recommend installing a VF from MAN or Corteco and changing it every 15-30 thousand kilometers, depending on the operating conditions of the vehicle.
How to clean the filter on a trimmer
Sooner or later, there will definitely be a need to wash the air filter of a Husqvarna trimmer or any other manufacturer. There is nothing complicated, and you can remove dirt from it yourself a couple of hours before mowing.
- We unscrew the bolt on the protective casing or press the latches.
- We take out the filter and inspect it. You will need gasoline to remove all accumulated oil and other contaminants.
- Pour gasoline from a canister onto the dirty filter and wash off all the oil. Squeeze and leave to dry for at least 2 hours.
- Wipe the installation area with a cloth soaked in gasoline.
- We install everything in place and close it with the casing.
Instead of gasoline, you can use soapy water, but it still does not remove dirt as effectively.
As an alternative to washing, we can recommend blowing or simply shaking out the debris. These cleaning options are suitable if there is no oil contamination.
Instructions for cleaning the carburetor of a lawn mower: a quick method
Many people prefer to use a quick method of flushing the carburetor of a lawn mower. This method is effective when isolated device faults are detected. Let's take a step-by-step look at how the disassembly and cleaning process happens with your own hands:
- To begin, you need to unscrew the four fixing bolts from the primer side.
- We will only clean the part where the membrane is installed, that is, the bottom. To do this, we separate the parts and, using a gun from the compressor, begin blowing with compressed air.
- We blow through the part of the carburetor with the jets.
- We remove the mesh and blow it through carefully so as not to damage it. Its contamination indicates the need to clean the channels.
- We check the condition of the foot (rocker arm) connecting to the needle valve. It should not be bent and move freely. Using gasoline or WD-40, you need to check that it is working correctly. After filling the bath in which the foot is located, you need to press on it. If liquid flows out of the needle valve, it means it is functioning properly.
- After making sure that the foot (rocker arm) is working properly, you can assemble the product.
- Assembly is performed in the reverse order of dismantling.
- Finally, install the cover with the primer and tighten it with 4 fixing screws.
After the carburetor has been cleaned using compressed air, do not rush to put it on the brush cutter. Now you can check the proper functioning of its operation, or more precisely, how it pumps fuel. To do this, connect the hoses to the outlet fittings.
We lower the supply hose into a can of gasoline and pump it with primer.
If gasoline flows out of the return line, it means that the work on cleaning the carburetor has been completed successfully. Now you can install the part on the lawn mower and check the quality of the tool’s functioning. This completes the process of quickly cleaning the product. The entire cleaning procedure is presented in more detail in the video.
How to remove and maintain a trimmer filter
A trimmer is an indispensable thing in the garden. If you want to maintain the beauty of your garden lawns, a trimmer will help you quickly cut the grass with minimal effort.
Like any other equipment, it needs careful operation. First of all, it is necessary to promptly replace the fuel and air filters.
At the same time, it is absolutely not necessary to send the equipment for service - anyone can cope with the task.
Replacing the trimmer fuel filter
If the trimmer starts to stall at high speeds, most likely the fuel filter is so dirty that it requires urgent replacement.
It is quite possible for anyone to replace it. You can follow the following algorithm.
The first thing you need to do is remove the intake tube (watch the video), since the filter itself is located inside the fuel tank. To do this, we pull the pipeline toward ourselves with our hands. When removing the seal, the intake tube should come off and remain in the tank - tweezers will help you remove it from there. You can also drain the gasoline from the tank and pull the intake tube out through the hole.
We take a new filter , put an intake tube and a spring ring on it.
We install the sealing ring back on the pipeline, attach the intake tube with a new filter to it and fill it into the tank along with the tube.
Reinstall the O-ring. We turn it a little around its axis so that the connection is fixed.
Bleed the carburetor using a booster pump.
Causes of breakdowns of gasoline and electric trimmers
A trimmer, both electric and with an internal combustion engine (ICE), is an indispensable tool in the summer and autumn for owners of dachas and private houses. With its help, weeds, small bushes are easily removed and the lawn is trimmed. But, like any equipment, trimmers fail at the most inopportune moment. To troubleshoot problems with your own hands, the user of this equipment first needs to determine the cause of their occurrence.
Malfunctions of electric trimmers
Since the design of an electric mower is much simpler than a motor trimmer, there are few reasons for its failure.
It should be noted that it is better to entrust the elimination of some of them to a specialist.
Basically, the trimmer stops working normally in the following cases:
- electrical cable fault;
- control button is faulty;
- burnt out motor stator winding;
- broken contact connections on the engine.
Sources:
https://fastmb.ru/autoremont/4636-kak-samostoyatelno-pomenyat-vozdushnyy-filtr-v-avtomobile.html https://tehnika.expert/dlya-sada/trimmer/neispravnosti-ustranenie.html
What to do if your lawn mower stalls?
Problems with equipment often arise unexpectedly. What to do if there is a large amount of work to be done, but the lawn mower does not turn on? The following factors may be the reason:
- Lack of gasoline in the tank. To refuel the tool, you must use high-quality fuel. Cheap gasoline can lead to damage to the cylinder-piston group. It is equally important to maintain proportions when preparing a fuel mixture of oil and gasoline. It is better to pour freshly prepared mixture.
- Filter clogged. Cleaning the filter from debris and dust particles should be done regularly, especially with frequent use of equipment.
If the lawn mower stalls and does not start, the reasons may be:
- Carburetor failure. This problem can be solved either by replacing the unit yourself, or by taking the device to a service center for a more detailed examination.
- Failure of the mechanical drive of the motor. In this case, it is necessary to clean it and lubricate the cables with oil.
There are times when a gas trimmer turns off after a few seconds of operation. Inspect the spark plug. If carbon deposits appear on it even after wiping and drying, check the operation of the air filter. If it is also oily, then most likely it should be replaced. Also, the cause of unit breakdown may be a failure of the ignition coil.
READ Cleaning the Trimmer Muffler
If the lawn mower starts and stalls, you must also check the air access valve into the fuel tank. If it is clogged, a vacuum is created in it, in which the carburetor does not receive enough gasoline. To eliminate this breakdown, you need to clean the valve and try to start the unit with the tank cap unscrewed. If the steps taken do not lead to success, then you should clean the fuel filter and check the carburetor. If the lawn mower does not start, you should disconnect the air filter and try without it.
If there is no spark, check the contacts and the gaps between them. The spark plug is unscrewed, a wire is connected to it, then it is applied sideways to the motor casing. It is necessary to pull the starter, as if starting the unit, but at the same time carefully observe the coal and the spark plug contact.
If you can’t handle the repairs yourself, it’s better to use the services of professional craftsmen.
How to change the air filter in a car yourself
Description of air filters: their types, symptoms of contamination, replacement methods, useful tips. Photo and video.
articles:
- Symptoms of pollution
- Which air filter to choose
- How to remove the old air filter and replace it with a new one
- Useful tips
- Video
An air filter is a filter element enclosed in a rubber shell and creates a barrier for dust and small debris. It cleans the air flow before it enters the engine and mixes with fuel. The smooth operation of the engine and car directly depends on it.
A car requires 15 liters of atmospheric air for every liter of fuel to form a fuel-air mixture. It enters through an external air intake or a pipe from the air filter, located next to the radiator grille.
Air quality is far from ideal. A suspension of sand, debris, dust and dirt, along with the air flow, rushes through the manifold to the power unit. If there is no filter system along the way, the engine will very quickly require expensive repairs. Between two routine checks, during which the car manages to travel about 15 thousand km, the filter manages to collect up to 150 g of debris.
The purpose of the filter is to cut off harmful debris from the engine. After cleaning, the air flow is able to act as a regulator of combustible mixtures in the internal combustion engine, emitting a smaller amount of harmful waste into the atmosphere.
Fuel filter for trimmer: all the nuances of the right choice
- Patriot. You can purchase this part from us for such popular models as Patriot PT-443, PT-553, PT-3355, etc.;
- Champion. In our catalog you will find a fuel filtration device for the gasoline trimmer of the following models: Champion T233, T523, T523S-2, T527-2, etc. We sell an air filter for this brand in an equally wide range of models;
- ECHO. We sell a fuel filter device for the following models - Echo SRM-22GES, SRM-2305SI, GT-22GES, etc.;
- STIHL. In our catalog you will find this unit for such popular models as STIHL FS55, FS120, FS250, FS450, etc.;
- Husqvarna. On our website you will find fuel filter devices for such popular models as Husqvarna 125R, 128R, 327RX, etc.
Filter for trimmer: types and principle of operation
The air filter cleans the air flow entering the carburetor from dust, the fuel filter cleans the fuel mixture from contaminants, and the oil filter cleans lubricant. The air gets dirty the fastest . When mowing grass, a large amount of dust rises into the air, which is partially drawn into the trimmer. The air filter retains it, causing its filter surfaces to become clogged. Their throughput decreases, the volume of air entering the carburetor decreases, and a lean fuel mixture enters the engine.
To clean the air filter or replace it, you must:
- Unscrew the outer casing;
- Open the lid;
- Assess the condition of the air filter. Clean its filter surface from dust and wash it with a soap solution (alkaline solutions dissolve oil better). This operation is only performed for reusable air filters. Disposable ones are immediately replaced with new ones;
- After the filter surface has dried, it is placed in its normal place, the lid is closed, and the filter is inserted into the gasoline trimmer.
Replacing the Mazda 6 air filter -
The design of the air filter on the Mazda 6, regardless of the generation and year of manufacture, is typical, rectangular. However, the elements are not interchangeable with each other due to different lengths and widths.
- Mazda 6 2008: length 286 x width 174 x height 33 mm;
- 2010: 280 x 171 x 31 mm;
- 2011: 284 x 169 x 32 mm;
- Mazda 6 2014: 286 x 176 x 35 mm;
- 2016: 288 x 174 x 32 mm.
READ How to Thread Line into a Champion Trimmer
The importance of timely filter replacement
The condition of the working surface depends not only on the duration of operation of the filter, but also on the specific road conditions in which the machine is located. During regular trips through the streets of a large metropolis, the filter will become saturated with dust and other impurities much faster, which will not allow for efficient cleaning.
This feature of the operation of a contaminated filter affects the intensity of filling the working chambers of the cylinders with air, and directly affects the combustion efficiency of the working mixture. With the opposite effect, the engine may partially lose its power, and air consumption may also increase slightly.
A contaminated replacement element can allow some impurities from the air to pass into the cylinders, which contributes to wear of the moving parts of the crank mechanism. The result of such work can be an expensive repair of the power unit, which is not comparable in cost to the price of an air filter.
Filter replacement manual
We open the hood and on the right side of the engine compartment we see the air filter housing.
Disconnect the 4 latches of the filter housing cover. (gently press the iron brackets with your finger)
A special feature is installing an air filter on a lawn mower.
To remove the cover and get to the filter, disconnect the block from the MAF sensor located on the corrugation.
Next, lift the filter housing cover along with the corrugation and take out the old filter.
We clean the housing from dust and debris, install a new filter and reassemble.
Where is the air filter located?
Even an inexperienced car enthusiast will be able to show the place where air filter This placement option protects it from rain and moisture flying from under the wheels. The filter must always remain dry - liquid ingress means the need for immediate replacement.
In a carburetor engine (ZIL, old Soviet cars), the device is placed in a rigid (plastic, metal) case on top of the carburetor, close to the air intake line.
In the injection engine found in most modern passenger cars, the filter is mounted in close proximity to the power unit in a plastic casing. The element fits tightly to the body and is fixed with fasteners.
Air filter for trimmer: recommendations for choosing from WellPart
filter for trimmers - disposable and reusable. Disposable devices are not cleaned but replaced immediately. For example, all fuel filters for brush cutters are disposable, because it is impossible to completely clean dust particles bound by the fuel-oil mixture from the filter surface.
Reusable trimmer air filters can be removed, disassembled and the filter surface can be cleaned of dust accumulated in it. In this case, you should carefully follow the requirements of the operating instructions. Otherwise, there is a high probability of damage to the filter surface, and dust penetrates through the damaged areas into the carburetor and then into the engine.
Reviews from owners of brush cutters do not give preference to any particular type of filter device. Each of them has its own advantages and disadvantages. In many ways, choosing a specific type of filter device is a matter of habit.
We hold special promotions for our clients. Subscribe and we will keep you updated
Sources:
https://filteru.ru/%D0%BA%D0%B0%D0%BA-%D1%81%D0%BD%D1%8F%D1%82%D1%8C-%D0%B8-%D0% BE%D0%B1%D1%81%D0%BB%D1%83%D0%B6%D0%B8%D0%B2%D0%B0%D1%82%D1%8C-%D1%84%D0%B8 %D0%BB%D1%8C%D1%82%D1%80-%D0%B4%D0%BB%D1%8F-%D1%82%D1%80%D0%B8/ https://express-remont .ru/staty/chto_delat_esli_gloxnet_benzokosa/ https://wellpart.com.ua/zapchasti-dlya-trimmerov/filtr-dlja-trimmera/
Symptoms of pollution
- The engine starts with difficulty and may stall while driving. Debris that gets into the holy of holies injures parts, accelerating their wear and rendering the engine inoperable.
- Fuel consumption increases by 10%.
- The release of carbon dioxide in the exhaust increases, causing damage to human health and the environment.
- Engine throttle response is lost due to limited air access to the combustion chamber.
- The power unit problem icon lights up on the dashboard.
Having realized that something is wrong with the car, and the symptoms coincide, it is better, without delay, to replace the filter on the spot.
When to change
It is always necessary to proceed from the specific characteristics of the car. Manufacturers do not always indicate exact timing for replacing the air filter element. The general recommendation is to time the replacement of consumables to coincide with changing the oil in the power unit approximately after reaching a mileage of 15 thousand km.
The need for replacement can also be determined by visual inspection. The surface should be clean and light, without oil stains or dark stains. If the color is changed, the filter must be replaced.
Self-examination should be carried out more often in the summer. First of all, this applies to those motorists who drive along country roads. All village residents, summer residents, fishermen, hunters and lovers of travel and extreme sports have a car that actively “gathers dust” on roads with poor surfaces.
READ Cleaning the Brushcutter Air Filter
The process of dust formation occurs extremely intensively. Dirt through the air intake enters the power unit through the inlet duct. Timely diagnosis of contamination protects against serious complications in engine operation.
It is important to remember that the dirtier the roads, the more sand and dust there are, the faster the air filter .
According to the maintenance rules, the air filter requires replacement when the car's mileage reaches 35-50 thousand km. This figure is clearly overestimated and is designed for operating the car exclusively on shampooed highways.
In Russian realities, it is necessary to take into account the factors of the environmental situation in the region and the severity of operating conditions. For Russia, the interval between filter replacements can be greatly reduced, especially in the warm season. According to experts, it makes sense to change the air filter after the car has traveled 10 thousand km
