Various electrodes are used to weld metal parts. The most common are SSSIs. The reason for this popularity is their versatility, as well as the fact that they are used for welding low-alloy steels. But most metal products are made from steel with a low degree of alloying.
What is a welding electrode in general? It consists of a metal rod, which is actually the material for filling the seam between the parts being welded. A special coating made of flux with the addition of certain elements is applied to it. For example, in an SSSI these elements are nickel and molybdenum.
Why is coating needed?
During combustion, the core metal takes oxygen and other substances from the atmosphere, which, when mixed, adversely affect the quality of the weld. It is necessary to remove them to the slag, preventing them from getting into the metal. This is why coating is needed. Here are specially selected materials that, when mixed with substances harmful to steel, combine with them.
This connection is lighter and when the seam hardens, it is brought to the surface into a slag crust. Thanks to this crust, the porosity of the seam is eliminated, which increases the strength and reliability of the connection. And this is considered the main point when welding metal parts.
Why SSSI electrodes are most in demand
A distinctive feature of electrodes of this brand is that they can be used at low temperatures. The main problems arise when the seam cools, and when it cools quickly, cracks, shrinkage cavities and other defects may appear. Subsequently, they will lead to the fact that the welded parts will simply separate from each other.
High quality, as well as the absence of defects during hardening, is due to the fact that the chemical composition of the resulting seam assumes sufficiently high ductility and impact strength. This will extend the life of this connection in the future, especially if the welded parts are intended to be used in harsh and frosty climates.
It is precisely on the basis of these useful properties and qualities that SSNI electrodes have gained such high popularity among users.
It is worth noting that this connecting material is considered more professional than, for example, ANO. Therefore, it will be quite difficult for an ordinary person to work using this brand.
Advantages and disadvantages
In the list of undeniable advantages of UONI welding electrodes, experts highlight such aspects as:
- the ability to create a high-quality seam with high impact strength, reliability and ductility;
- low consumption of electrodes due to iron powder in the coating;
- no need to use protective gas.
If we talk about the disadvantages of SSSI products, then it is necessary to note:
- the need to attract experienced welders;
- thorough preparation of welded parts;
- inability to use alternating voltage.
Based on the above, it can be stated that SSSI products are highly specialized electrodes that require professionalism and a competent approach to welding.
Technical characteristics of SSSI
Among the many parameters that relate to the properties of electrodes, the most important are:
- coating – basic;
- surfacing productivity – 1.4 kg/h;
- the cost of surfacing one kilogram is 1.7 kg;
- current – constant;
- polarity is reversed.
It is worth noting that this type of electrodes has an internal additional classification. There are 4 groups in total:
- SSSI 13-45. Most often used to connect parts that were made by casting or forging. The seams are plastic and also have a fairly high viscosity.
- SSSI 13-55. This type of electrode is also intended for welding parts made of low-alloy steels, but with a high carbon content. A distinctive feature is that this brand cannot be used when welding a seam from top to bottom. A composite material consisting of sulfur, manganese, silicon and phosphorus is used as coating. The use of such electrodes contributes to the production of a high-strength weld with high resistance to the formation of cracks and fractures.
- SSSI 13-65. They can be used for particularly critical work, as well as on those metal structures for which increased quality requirements are put forward. According to GOST, these electrodes are produced with diameters of 2 mm, 3 mm, 4 mm and 5 mm. Regardless of whether it will be the manufacturer ESAB, LEZ or some other. Different manufacturers may offer their products at different prices, and this will be the difference. It is worth noting that an increase in thickness inevitably entails an increase in current strength. Therefore, those using an inverter may be a little limited as weaker models may not be able to produce the required amount of current.
- SSSI 13-85. Allows you to work with metal structures of increased strength, including those made of alloy steel. Like model 13-65, they can be used when welding parts in all spatial directions.
SSSI or SSII?
On sale you can find products with both labeling options. In fact, they have the same purpose, but differ significantly in price and quality. What is the reason for this unusual situation?
Returning to the question of the state standards used, it is worth noting that the main document in this case is GOST 9466-75. Both of the above types of products fully comply with it, however, UONII electrodes undergo additional certification by NAKS.
NAKS is the National Welding Control Agency, which has developed and issued additional guidance documents - RD 03-613-03. They can be considered a full-fledged addition to the existing GOST, which significantly tightens the requirements for the use of welding materials.
Thus, despite compliance with GOST, UONI 13 electrodes are of lower quality than products marked UONII, and, as a result, do not give such an outstanding result during operation.
You can distinguish products by the markings on the box.
SSSI marking and explanation of the main parameters
To distinguish electrodes of even the same brand from each other, they came up with additional markings that determine their purpose. For example, what could the marking e50a or simply e55 mean? Having a special table at hand, you can easily determine what is what and how these names differ.
So, the letter “e” means that this is an electrode designed for manual arc welding. The number 50 is the limit of strength of the connection obtained when used correctly. The letter "A" is used to represent a seam. She says that the seam will be plastic and can easily withstand high impact loads.
This is followed by the name of the SSNI electrodes themselves, after which additional markings are placed, for example, 13-55 or 13-85. After this, the diameter of the steel core is indicated. It is worth noting that it is indicated with an accuracy of tenths of a millimeter. That is, if it’s a 5, then it’s 5.0, if it’s a 4, it’s 4.0, and so on.
At the very end there is a letter “U”, which indicates that this type of electrode is used for welding carbon steels.
general information
If you need a high level of seam quality when performing manual arc welding, then UONI electrodes are suitable for you.
In order to perform a truly high-quality seam using RDS technology, extensive experience is required, both in the work itself and in the selection of electrodes. Any master will tell you this.
The SSSI brand will easily serve you while you study and gain experience.
What is the difference from other brands? For good operation, you need to set the polarity reversed, then use direct current. The welding temperature is not that important.
The next difference is that SSSI are intended for those people who have been practicing welding for several days. Complete beginners who have been welding relatively recently will not be able to make a good weld the first time.
You need to objectively assess your level of preparation so that there are no problems later.
The rods also differ in their diameter. The most popular among consumers are diameters of three and four millimeters. You will weld most parts with these types.
Those who use the SSSI brand may have noticed that there are several numerical designations. For example, 13/45 or 13/55. What is the difference? Their structure is quite similar, actually.
Only each of them is intended for a different metal. We'll talk more about this in the next chapter.
Additional markings
In addition, other designations may be used:
- T – welding can be performed with thermally resistant metals;
- B – welding of high-alloy steels is possible;
- N - this letter means that these electrodes can be used for surfacing the surface of the part (in case of restoration of its geometry or design dimensions);
- L - such electrodes can be used when welding alloy steels.
It turns out that an experienced welder, looking at a pack with markings, descriptions or a product certificate, can immediately understand what these electrodes are intended for. In addition, it will be clear how effective their use is in a particular job. It is recommended not to violate the technology in any way, then the welded elements will last for a long time without the need for repair or replacement.
general description
The products of this brand are the best option for those who strive to obtain a high-quality seam using manual arc welding. Every professional knows that in order to form a high-quality weld, you need to practice long and hard. In manual arc welding technology, special attention is paid to the correct selection of electrodes. The SSSI brand is excellent for these purposes.
What features do they have? First of all, you need to take into account that to work with these consumables you must select reverse polarity and direct current. The choice of temperature conditions for welding operations does not have any influence. Secondly, the electrodes were specifically designed to meet the needs of practitioners. A student or novice welder is unlikely to be able to immediately lay a high-quality weld. Most likely, he won’t succeed even on the fifth try. This should be taken into account so as not to be disappointed at the beginning of your journey.
UONI brand products are supplied to retail chains of various sizes. The most popular among consumers are electrodes with a diameter of 3 and 4 mm. They can be used to join most metal workpieces. Many people paid attention to the different markings of seemingly identical electrodes. Yes, indeed, their composition differs slightly. However, they are designed to join metals of different chemical compositions.
Pros and cons of SSSI
The useful properties of these electrodes were described in detail in the previous paragraphs, so we will specifically focus on the disadvantages. In fact, there are almost none except that some types of SSSI cannot be used in top-down welding. Troubles can also arise due to moisture that is absorbed into the coating.
But, despite the fact that this is a very significant drawback that prevents the arc from burning correctly and the seam from laying evenly, it is very easy to deal with. This can be corrected by calcination. This is the process of heating the rods and coating in an oven at a certain temperature.
Storage
A high level of quality of seams depends not only on the electrodes themselves and the experience of the master in welding metal. The ability to store rods also plays an important role.
To store electrodes, it is necessary to equip a separate room in which the instrument can be kept for a long time. An important condition for such a room is dry air.
The temperature must be kept at a stable level. A more acceptable value is 15 degrees. For such conditions, an air conditioning system is usually used.
If you plan to store in a basement or garage, take care of waterproofing. Excess moisture can damage the electrodes. Such conditions can be difficult to create at home. How can you save on storage?
Features of SSSI calcination
- It is important to heat the oven to 250-280 degrees, and also to ensure uniform calcination of the electrodes. This is achieved using special containers.
- It is forbidden to keep the electrodes in the oven for more than 4 hours, or to calcinate them more than three times.
- After calcination, the electrodes should be used within 8 hours. After this time, the event should be repeated.
If everything is done correctly and clearly, without violating technology, the quality of the seams will be at the highest level. The welder will receive a stable arc without the electrode sticking to the surface of the parts being welded.
Welding process
Before starting the process of welding a metal structure, the SSSI electrodes must be calcined. This is due to the porous structure of their coating, which actively absorbs atmospheric moisture, reducing the performance characteristics of the consumable.
This process involves placing electrodes in a special oven. Temperature parameters for calcination are indicated on the packaging of products for each specific model. On average, this is a temperature effect of about 250-300 degrees Celsius for 4 hours. It is not recommended to do calcination more than three times to avoid loss of performance characteristics of the electrodes.
The welding itself is carried out in the following sequence.
- Cleaning the surfaces of parts.
- Cutting edges of workpieces according to GOST.
- Placement of structural elements according to the drawing.
- Connecting welding equipment.
- Setting current parameters for a specific electrode.
- Excitation of the arc.
- Creating a herringbone seam.
- Turning the workpiece over and forming a reverse seam.
- Cooling, cleaning and checking connections.
UONI welding electrodes should be stored in a dry, heated place with a humidity of no more than 50%. Direct exposure to sunlight and moisture should also be avoided. Low temperatures (less than +15°C) are also contraindicated.
Reviews
Egor. While working at a metallurgical plant, I managed to stock up on many SSSI electrodes for various purposes, including MR ones. As they say, there is everything for all occasions. I don’t use it very often, but no matter how much time has passed, they still work and work without problems. Quality is QUALITY in Africa too!
Anatoly. I welded with electrodes at a SSSI in the north, worked in Magadan, even in severe frost you light an arc and everything burns normally. And the seam is plastic and even with rapid cooling it does not warp or break. In 10 years it will be a solid monolith, no cracks or chips, I guarantee it. Now I have an inverter welder, if I need to weld something, I use only SSSI.
Vladislav. It’s convenient that a pack of electrodes is 5 kg, so you don’t need to constantly print it out if you’re working. In short, don't get distracted. I got an internship as a welder and am now learning the skills. I practice, improve, learn to select the brand that is best suited. I have already mastered the bulk of electrodes - now I am studying with SSSI. True, at school they said that they were the hardest to cope with.
Results and conclusions
That's all. We haven't talked about everything. For example, how the electrodes are welded and deciphered. But these are big topics that deserve separate articles.
We have provided only basic information about SSSI products to make it easier for you to select the rods you need. Don't forget to ask for all the necessary documentation when you select tools.
What do you know about UONI brand electrodes? Have you ever used them? What models have you worked with? Share these stories in the comments. Productivity at work!
