Figures made from rubber bands. Slingshot weaving for beginners

Weaving figures from rubber bands is very popular among children and teenagers. To learn how to create things from rubber bands yourself, you don’t need expensive equipment or special skills. Before you start weaving, you only need to purchase the following devices: a slingshot; elastic bands of different colors; machine; hook (plastic or crochet).

The creator of this type of needlework is Chong Chun Ng. Together with his family, he started producing weaving machines. His children tried to weave figurines and bracelets from rubber bands, however, they experienced difficulties. To help his daughters, he invented a machine, which was a board with nails on it.

Instead of rubber bands, Chong took pieces of tubes of different colors. The master's invention helped his children improve their weaving skills. To support the man, his family invested all their savings in this project. To help future buyers, family members filmed master classes in video format.

Weaving for beginners on fingers

To make a bracelet on your fingers, you must follow these steps:

1. Decide on the color scheme of the bracelet. Choose an elastic band of the color you like, and then put it on your index finger. Then give the elastic band a figure-eight shape by twisting it and put the resulting loop on your middle finger. After this, you need to take two more elastic bands of other shades and put them on top of the resulting figure eight. You can't twist it.
2. Now you need to remove the loop from the middle finger and leave it on top, that is, in the middle of the phalanges of the middle and index fingers.
3. Then, in the same way, you need to cross the second loop located on the index finger. After this work is done, a knot is formed between the fingers.
4. Next, take the second elastic band and put it on two fingers again.
5. We take the loop located at the bottom of the middle finger and fix it between the fingers in the same way.
6. We do the same work with the loop on the index finger.
7. It should be noted that the number of required rubber bands on the fingers should be three. If there are more of them, the rubber bands will get tangled. Each time, transfer the loops from bottom to top between your fingers. Continue braiding the bracelet until you get the desired length.
8. After you have completed the bracelet, remove the two extra elastic bands. Attach a clasp shaped like the letter S to the resulting loop. Fasten the two edges of the resulting bauble.

Weaving from elastic bands using a fork.

Some figurine ideas for beginners

After preparing the tools and materials, you can begin to work. For beginners, here are instructions for weaving the following figures:

• banana;
• heart;
• spider;
• star.

Banana weaving using the lumigurumi technique

Due to the fact that the banana has a very simple shape, you can start learning the lumigurumi technique with it. To make it, in addition to the slingshot and hook, you will need 20 yellow and 4 black rubber bands.

How to weave from rubber bands on a slingshot

Weaving bracelets from rubber bands originated in America and “captured” the whole world. Availability of materials, simple technique, speed and training of fine motor skills - this is the success of the new technique. By the way, you can also make a bracelet that makes wishes come true. You can weave baubles either on your fingers or using a special slingshot, which comes with some Rainbow sets. Bracelets are woven on a slingshot in the same way as on fingers.

Take 25 rubber bands in two colors you like (preferably contrasting ones, this will make the bracelet brighter), a special S-shaped clip and a slingshot for weaving. Take one rubber band and put it on the slingshot in a figure eight pattern. Then take an elastic band of a different color and, without twisting, attach it to the slingshot, then again - an elastic band of a different color.

Grab the bottom elastic band with your fingers and lift it up. Do the same technique with the second elastic band. Put an elastic band of a contrasting color on the slingshot and do exactly the same manipulations. Weave the bracelet in this way until it reaches the desired length. Connect the ends of the bracelet using an S-shaped clip. Your bracelet is ready. Even beginners can weave such an accessory, since no special patterns are used in it. If you love handicrafts, read the master class on a knitted bracelet with hearts.

How to weave from rubber bands on a slingshot.

The simplest master class

When thinking about what you can make from rubber bands for weaving in your first work, the answer will be obvious - it’s a strawberry. For production you need a minimum of material and time, to understand the techniques and get a chic keychain, this idea will be most suitable.

In terms of color characteristics, the product is very similar to a real berry. And the volume of the finished composition adds attractiveness. For work you need:

1. Hook.
2. Green blanks for the tail.
3. Red elements for the base.

The first red ring must be twisted twice and placed on the right side of the device. Guided by the order, further string the remaining parts already stretched at both ends. Carefully remove the twisted piece and place it in the center of a long cord. After these manipulations, the initial state is restored.

How to weave from rubber bands on a machine: technique

The machine is an intricate contraption with which you can weave bracelets with a wide variety of patterns - from simple to complex. Take the machine and place it so that the concave side of the pegs is not facing you. Place the first elastic band on the pegs of the first left row. Tie all the pegs, except the last one, with pairs of rubber bands to form a rectangle.

Using multi-colored elastic bands, connect the central pegs to adjacent posts, starting with the second post of the first row. It is necessary to work clockwise. Connect the fourth central pillar with the neighboring one, forming a star. Choose an elastic band of the color that will be your main one, fold it into a ring and throw it over the last column of the middle row. Do the same with the other columns. By the way, handmade bloggers claim that some handmade life hacks and beauty tricks can be applied in life.

Now set the machine so that the last sprocket is the starting one. Take the elastic from the middle post and put it on the post with the core. Starting from the right column, remove the elastic bands counterclockwise, throwing them over the rays. Take the elastic band that connects the outer pegs of the middle and left rows and throw it over the left column. Combine the columns on both sides with rubber bands. Then place the machine with the cuts of the pegs facing you, hook the hook through the loop of the outermost post and tie a double knot. The bracelet with the star pattern is ready! Remove the product, connect the ends with a clip and you can wear it as a bright accessory or make a cute gift.

Weaving techniques

During the learning period and in the initial stages, you can weave on your hands without special devices.

For this you only need a weaving pattern. After mastering the initial skills, you should purchase equipment and accessories for making more complex crafts - a hook or a machine.

Complex creative ideas can be realized using a weaving machine. In this way, elegant products can be made with the least amount of labor.

Snowflake made from rubber bands on a slingshot

Using ordinary chains and using your imagination, you can make many different New Year's toys. But if you are interested in how to weave New Year's toys from rubber bands using more complex patterns, try making an unusual snowflake. For it you will need rubber rings in blue and silver shades, a pair of hooks and a slingshot. We will make a six-pointed snowflake. We will weave each ray separately, and then connect them. So, take a blue elastic band and put it on one of the pegs of the slingshot, wrapping it around it 4 times. Next, take two blue rubber rings, pull them over both posts and remove the first winding on them.

Gather the remaining loops on the pegs onto one side of the slingshot. Repeat these steps twice more, each time slipping the loops onto the same post. Next, throw two white rubber bands on the slingshot and transfer all the blue braids hanging on the peg to them. Be careful not to tear the material. A little higher, put on two more white rings and drop the lower loops from both posts onto them. You have formed the edge of one of the rays of the future snowflake. Now you need to slightly increase its length. Pull two more white elastic bands and drop the bottom pairs of loops onto them again. Repeat this operation two more times. It’s no longer worth it so that the snowflake doesn’t turn out too spread out.

When the ray is ready, carefully remove it onto the spare hook. Set the workpiece aside so as not to interfere. You have to make 5 more of the same rays. When they are ready, transfer them again to the slingshot - three for each column. Let's start assembly! Take two white rubber bands and put them on both pegs of your machine. Remove all the rays of the snowflake from both columns towards the center. Try to place them neatly, without clinging to each other. Pull another white elastic band a little higher and slip the lower pairs of loops onto it. Transfer both loops to one “horn”, throw the bottom one to the middle, and tighten the top one well. You have a snowflake with a loop in the center. Spread the rays and hide the loop in one of them using a hook. The decoration is ready!

Material on the topic: How to learn to weave beautiful braids of varying complexity

Bracelet "Triad"

The next one is quite simple, but original and stylish bracelet, weaved using the “triad” technology. It is double-sided, since the design of the front and back sides of the product is significantly different. You will need 40 yellow and 40 purple rubber bands. For the weaving process, you can use a small machine, since only three columns will be involved in the work. Their open parts look to the right. Further all actions are carried out according to the following plan:

1. A purple elastic band is twisted into a figure eight and placed over two adjacent columns of the bottom row of the machine. In a similar way, place a yellow rubber band on the outer columns of the left and right rows. The exact same procedure is done again.
2. Another purple elastic band is placed on the first two columns, but no longer twisted. In the future, all elements are put on without twisting. On the outermost pin, grab the bottom purple loop with a hook and remove it from the post. Then a similar operation is performed on the corner post.
3. The same actions are performed with a yellow elastic band. First, they are thrown on without twisting, and then the lower loops are removed with a hook from the outermost and corner column.
4. The steps described in paragraphs 2 and 3 are repeated until the desired length of the product is achieved.
5. To complete the weaving, perform the following steps. Remove one bottom loop from the outer columns, and two bottom loops from the corner pin. Return to the edges of the product and throw one loop at a time onto the corner column. In turn, the two lower loops of the corner pin are removed from it.
6. A fastener clip is put on the remaining two loops and connected to the first loop of the opposite edge of the product.

The double-sided stylish bracelet is ready. It can be worn on one side or the other.

Bracelet "Triad" made of rubber bands.

Scheme of a French braid bracelet on a slingshot

You will need: rubber bands of two colors - for example, red and blue, a slingshot, a hook. Take the slingshot in your left hand, the two columns should point upward with the notches facing you.

1. Place a figure eight on the first red elastic band.
2. Put on in the usual way, without twisting the next two elastic bands, alternating colors (for example: blue-red).
3. Hook the bottom left elastic band, then remove it from the post and lower it between the posts.
4. Hook the bottom right elastic band, then remove it from the post and lower it between the posts.
5. Place the next rubber band on the posts, changing the color.
6. Use your hook to slip the middle red elastic from the left post.
7. Use your hook to slip the bottom blue elastic from the right post.
8. Weave in this way until you reach the desired size of your bracelet. Then, when the last two elastic bands remain on the posts, remove the bottom elastic bands one by one using a hook.
9. Throw the last elastic band from the left post onto the right column, hook two elastic bands with one of the hooks on the clip, then remove the bracelet from the slingshot.
10. Hook the initial figure eight rubber band with the second hook of the clip.
11. Connect the bracelet into a ring.

Scheme of a French braid bracelet on a slingshot.

Double "dragon scales" on a slingshot

You will need: a slingshot with 4 posts, a hook, a clasp, 86 black and 42 colored elastic bands.

1. Position the slingshot with the indentation facing you.
2. Place a figure eight of red elastic on the 2 middle posts.
3. Place a figure eight of black elastic on the right and left posts.
4. Throw the red rubber band behind the post.
5. Place a pair of pink elastic bands on the middle posts, wrapping them twice.
6. Remove the lower middle black elastic bands by the columns.
7. Fold the black elastic band in half, then place it in a figure eight on the right posts. Do the same with the left columns.
8. Throw the bottom row of rubber bands behind the columns.
9. Continue weaving in the same pattern and do not forget to alternate the colors of the rubber bands.
10. Finish weaving when there are black elastic bands left on 4 columns, then remove the elastic bands from the outer columns to the middle ones.
11. Weave by throwing the bottom elastic bands over the posts.
12. Transfer the elastic bands from one column to another, then put on the S-shaped clasp and connect the ends of the bracelets.

How to weave from rubber bands on a slingshot.

Zvezdochka" for experienced

Before weaving rubber band bracelets using the “Star” technology on a machine, you need to decide on the design. The colors of the rubber bands are selected for both the stars and the rim. The main rule: the colors of the figures must be correctly combined so that the product does not look tasteless. We prepare the machine, which is assembled from three rows of 13 columns. The middle row is shifted by one pin relative to the outer rows:

1. 26 yellow rings are prepared, which will act as the rim of the product. Throw the elements onto the columns, starting from the middle row. They continue to put them on around the perimeter of the front one, without using the last column. The last ring is put on the penultimate row of the front row and the penultimate middle row. As a result, a total of 13 rubber bands were worn.
2. Return to the first column and add 13 more rubber bands in a symmetrical order. In this case, the outermost row of the machine is used.
3. Move on to weaving stars. For one such element you will need 6 rings. The center of the star is determined by the second column of the middle row. The pins that surround it form a hexagon. Alternately place elastic bands on the central column and one of the hexagons.
4. Rubber bands of a different color will form the next star, the center of which will be the fourth pin of the middle row. The rings should be tightened in the same way as described in the previous paragraph. Then they continue to form the remaining four stars, the center of which will be the sixth, eighth, tenth and twelfth column.
5. At the next stage, take yellow elastic bands, twist them in half and put them on the leftmost column of the middle row, and then on all the centers of the stars.
6. Then the machine is turned over so that there are two free end posts in front.
7. Begin to remove the rings in the following way. From the first pin, using a hook that is inserted inside, a ring is pulled out, forming a star, and put on its center. Then the elastic bands are removed from the center and put on the elements that make up the hexagon. The procedure is repeated with other stars. All actions are performed counterclockwise.
8. They return to the yellow elastic bands that were worn at the very beginning. Using a hook, pull out the ring and put it on the adjacent column. In this way, all elements pass one by one along the perimeter of the machine.
9. At the final stage, take a yellow elastic band, grab it with a hook and thread it through all the loops of the first column, fold it in half and put a clip on it. After this, carefully remove the product from the machine.

How to weave bracelets from rubber bands - weaving bracelets from rubber bands

Recently, an unusual hobby has gained popularity throughout Russia - making - weaving bracelets from rubber bands (rubber bands). This is not complicated and fun, an activity that both children and adults will enjoy. The bracelets turn out to be bright and unusual; they can become an interesting and pleasant gift for family and friends, or a new unusual accessory in your jewelry.

Such a hobby will not be expensive for you - sets of elastic bands for bracelets will cost you on average 1,800 rubles (the price depends on the quantity and place of purchase). It contains 5000 small multi-colored rubber bands, which will be enough for you to make one bracelet. There are a huge number of patterns and techniques for weaving bracelets like this. They can be created using additional devices.

Bracelets made of rubber bands.

To weave bracelets from rubber bands you will need:

• special machine,
• slingshot,
• fork.

But if you have already purchased elastic bands, and you don’t have any of the above on hand, don’t be upset - you can weave a bracelet without these devices. To make this decoration with your own hands, you will only need a set of rubber bands, a crochet hook with a small head (it would be better if it was plastic), a machine or a slingshot, your desire and imagination. Choose the colors you want to combine with your bracelet and the weaving method.

Weaving looms or Rainbow Loom for weaving elastic bands are cheap and practical; they can be found in specialized stores (handmade) for needlework or in toy stores in any corner of Russia. These bracelets were created in the city of Novi. The first patent for it was received by the creator Chong Chun on July 16, 2013.

The Rainbow Loom is a plastic board with small pegs on it. The pegs are designed so that rubber bands can be attached to them and act as a holder. They greatly facilitate the process of weaving bracelets. The machine comes with instructions that describe in detail how to install it. You will need to make sure that the U-shaped pegs on the machine are pointing up and away from you.

The simplest of several methods that is suitable for beginners is the basic method of weaving bracelets on a machine. First you need to place your first rubber band diagonally on the pegs of the machine. It is best to start with the first pegs and stick to the side you started from.

Bracelet with a flower on the wrist made of rubber bands.

Origin of rubber bands

DIY Christmas tree decorations: what you can do for the New Year
Chong Chun Ng is the inventor of multi-colored rubber bands and a machine for weaving them. This man gave amateurs a new type of needlework, which firmly occupied its place in the hearts of craftsmen.

The emergence of a new type of creativity was facilitated by Chong’s desire to help his daughters. They loved to weave colorful bracelets, and their dad came up with a machine that greatly simplified the weaving process. The inventor liked the idea so much that he decided to patent it. The loom was called Rainbow Loom - rainbow loom.

At first, sales of sets of elastic bands and braiding tools did not move at all. Then Chong Chun Ng decided that he needed to tell people about the capabilities of his machine. The inventor's daughters and niece filmed video tutorials on weaving using Rainbow Loom and posted them online. And this gave a strong boost to kit sales. Needlewomen really liked weaving from colored rubber bands. From this bright and durable material you can create wonderful little things - bracelets, keychains, toys, various accessories and wardrobe items.

There are a lot of tools for weaving from rubber bands. Rainbow Loom kits include two machines - a rainbow machine and a slingshot machine. You can weave almost anything with a rainbow loom. Bracelets and small figurines are most often made on slingshots. But needlewomen even use improvised means to complete their work, for example:

• Combs;
• Table forks;
• Crochet hooks;
• Own fingers;
• Wooden sticks and pencils.

So even without a machine you can weave. If the rubber bands are of good quality, then the products made from them will be strong, bright, and durable.

How to crochet a berry from rubber bands

First we will make a magic ring. To do this, we need to wrap the hook three times with the first elastic band (cut). We will throw the second side of the cutter, which we just stretched, onto the hook. Now there will be 2 loops on our hook. We stretch the left one through the right one. It turned out to be a knot. It doesn't need to be tightened too much. We move the remaining loop on the hook and return the hook to the very first ring. We only pull the cutter through the ring. Put the second side on the hook again and pull the leftmost loop on the hook through the remaining 2.

And so we weave 4 more cuts. As a result, we will get 6 loops, the 6th one is on our hook. We find the very first loop of the row and place the hook under it. As a result, we will still have 6 loops. Next we will simply repeat the row. In the new row we will slightly enlarge our berry. To do this, we will weave 1 cut into the 1st loop, and 2 cuts in turn into the 2nd loop. In the 3rd again 1 cut, in the 4th 2 and so on. As a result, we will have 9 loops.

Gum berries.

In the next row we weave 1 elastic band through all the loops, that is, we will still have 9 loops left. The berry is almost ready, all that remains is to add a little greenery. For this we use green cutters. Through the 1st loop we weave 1 cut, and then we will draw the hook into the 2nd loop and immediately into the 3rd. Through these 2 loops we weave 1 cut. Next, we put the hook in 2 loops again. And so on until the end of the row.

We are weaving only one row with green cutters, so we tighten the last knot tightly. This is how you can quickly and easily weave a bright berry! You can weave as many of these berries as you like. It is not at all necessary to weave berries from red or purple threads; you can weave them from any other colors. They will look no less beautiful.

Weaving toys from rubber bands is an interesting process in which you can combine play and the development of useful skills in a child. After all, while he finds all the right colors, imagining the finished figurine, and takes each rubber band with his fingers, fine motor skills and imagination develop. Girls will especially enjoy creating toys and jewelry using this technique, because they themselves will be able to make their favorite characters, beautiful dolls, bracelets and rings.

For creativity you will need:

1. Stock of rubber bands. The larger it is, the more voluminous and/or long the finished product will be. Coloring is also important, with many bright and rich shades that children like so much. It is better to choose colors very close to those used in the instructions so that kids do not get confused or upset about this.
2. Organizer. We advise you to think in advance where you will store the colorful scattering of rubber bands. This can be a purchased plastic box with several sections or any spacious box with homemade internal partitions. If you use an organizer, you will always have the necessary rubber bands at hand, and there is less chance of accidentally scattering or mixing all their different colors with each other.
3. Slingshot (your own fingers, pencils or fork), hook or machine. This is almost the most important part of the answer to the question: “How to weave a toy from rubber bands?” The more complex the product is, the more serious a tool is needed for it - and from a plastic two-post slingshot we move on to a hook and a larger special machine (Rainbow Loom, Monster Tail), on which you can hook a lot of rubber bands at once. One toy can often be made using several techniques at once, so everyone chooses the most convenient one for themselves.
4. Clasps and additional elements (such as eyes for people or animals) to complete the work or add more beauty or realism to it. Special plastic fasteners will allow you to firmly fasten the finished earring or bracelet and adjust its length; they can also be used for design experiments with doll clothes. Doll eyes can be found in art and craft stores, where many options are often presented, from the most simplified to the very realistic. For fun toys made from rubber bands, the first of these options is more suitable.
5. Instructions with pictures or video lesson. It will be especially useful for beginning craftswomen and their mothers or other relatives, who will help and at the same time learn how to create original crafts themselves. It’s better to move on to your own experiments after several woven toys made from rubber bands are pleasing to the eye.

How to weave a toy from rubber bands.

In general terms about devices

There are special devices for crafts of this kind or plastic molds. Some craftsmen adapt disposable cutlery and design on them.

To achieve the most productive results, you can use both solid and collapsible structures. The main thing is that working on creating a figurine from rubber bands is simple, and the activity is enjoyable.

Among the analogues, the following quite convenient and practical specimens are noted:

1. Using a hook.
2. Pencils.
3. Ballpoint pens.
4. Fingers.

The differences between a slingshot and a machine can be seen immediately; the first will have 2-4 columns, and the second will have at least eight. The manipulations will also be slightly different, but in general terms all the techniques are similar.

Having dealt with the most important stages, the machine on which everything will be produced will no longer be of particular importance. And with some practice, more complex designs will seem easy and trivial.

Note!

• How to make wooden shelves with your own hands - original design options

• Kinusaiga technique for beginners: what is it, a description of creating paintings from threads

• How to make flowers with your own hands from paper, fabric and scrap materials. We create bouquets of homemade artificial flowers

Tools and devices for weaving from rubber bands

At first, you can limit yourself to using your own hands (index and ring fingers as a “fork”) and rubber bands of 2-3 colors. For fastening you will need a hook-type clasp, but even without one you will be able to secure the bracelet to your wrist using any connecting ring or the same elastic bands. Sometimes special machines are used for weaving. They are also different. The simplest one is like a two-pronged fork, somewhat reminiscent of a slingshot. If it's not there, don't worry. You can make a similar device from whatever is at hand, for example, two pencils or your own outstretched fingers.

Interesting read: How to weave a minion from rubber bands - all the main methods

In this way, you can weave chains in which the elastic bands will sequentially cling to each other, forming one continuous row. There are reversible forks with different numbers of tines. Some sets offer a hook, but it can be replaced with a regular one for knitting. A machine with a large number of teeth involves weaving several chains at the same time. They hold on to each other, forming a wide stripe. The machines can also be used to weave voluminous jewelry and key rings.

Weaving from rubber bands is so diverse that it provides simply limitless scope for creativity. You can weave large beads, experiment with color combinations, come up with new strands and patterns. The decorations are bright and unusual. It is not surprising that Loom bands (literally translated as “band machine”) are quickly gaining popularity among children and adults. You can make anything from rubber bands: keychains, rings, bracelets, headbands, phone cases and even clothes!

Various snakes made from rubber bands.

Touches of humor

Fans of jokes will appreciate products in the form of a snake with a protruding tongue. You immediately want to take such masterpieces into your palm and crush them a little. The long body allows you to wrap all your fingers in cold blood, this activity will greatly amuse and relax you.

Having figured out how to weave a shark from a famous cartoon series out of rubber bands, you can surprise your relatives. Such predators, unlike real ones, do not bite, and playing with them brings a lot of positive emotions.

Symbol of enlightenment

The owl is a wise bird that is a symbol of knowledge. Such a small gift can be presented to a student or student. A small keychain in the shape of an owl can be woven on a loom.

To work you will need:

• Rainbow Loom machine;
• Hook;
• Rubber bands.

Carefully follow the attached step-by-step instructions and you will succeed.

Pull out the middle row of the machine slightly. The notches of the posts should face you. Put on elastic bands, connecting the columns in pairs. There is one elastic band at the edges and two in the center. In the second row there is only one elastic band in the center, there are pairs everywhere. Look at the photo.

A pair of orange rubber bands will form the bird's beak. The crossed pairs of the primary color will be the shoulders.

Next are four pairs of white elastic bands. To make the paws, you need to twist the orange iris on the hook three times and remove the twist with a pair of elastic bands of the main color. Do the same with the bird's eyes. Strengthen the parts as in the photo.

Now you just need to remove the bottom row with a crochet hook around the entire craft. Then the middle row and the head are woven. Pull the last loops through each other and fasten. The keychain is ready.

If the photos did not help you understand the weaving technique on the machine, you can watch a video that clearly shows the process. This will allow you to easily complete this craft.