The OS-M-200 carriage-type rounding machine is designed for rounding thin gauges.
The OS-M-200 rounding machine is used for the manufacture of stakes, MAFs, fence posts, trellises, arbors and other similar products.
The OS-M-200 rounding machine is used as a small rounding machine for the production of small architectural forms and house construction.
Design features of the OS-M-200 rounding machine
- Reliable, proven design of the frame and guides of the rounding machine.
- The proven technology ensures the accuracy of the dimensions of the rounded log and ideal conditions for the operation of the tool.
- The frame of the machine is dismountable, which simplifies transportation.
- The movement of all movable units in the movable carriage of the rounding machine is carried out along textolite inserts, with adjustment of the clamping force.
- The design gives high accuracy and rigidity to the OS-M-200 rounding machine, and ensures a long service life of the machine.
- In all loaded units, reinforced chains for agricultural purposes are used, with an increased service life, thereby reducing downtime associated with the repair of the OS-M-200 rounding machine.
Introduction
No matter how much wood processors wave and shout today about the complete processing of wood, in fact, we in Russia are still far from reaching the level of wood processing in European countries.
Processing of small timber is especially difficult for us. This is due to the large number of problems that woodworkers have to face.
So, I will talk about all the pros and cons, all the problems encountered when sawing small-scale wood from 8 to 14 cm, which is formed when cross-cutting a log in the top part and when harvesting young forest (often it is prepared after fires or during thinning). I will also give some tips for building the optimal technology.
Technical characteristics of the OS-M-200 rounding machine
| options | ||
| Maximum workpiece diameter, mm. | 400 [1] | 400 [1] |
| Length of the workpiece being processed, m. | 0,5 — 4,0 | up to 6.5 or 8.5 |
| Maximum thickness of the layer cut in one pass (along the radius of the log), mm | 20 | 20 |
| Diameter of rounded log, mm | 80 — 350 [2] | 80 — 350 [2] |
| Installed power, kW | 9,7 | 25,35 |
| Power consumption, kW | 9,7 | 15 |
| Longitudinal feed speed of the carriage, m/min | By hand | 0 — 20 |
| Log rotation speed, rpm | 40, 60, 90 | 40, 60, 90 |
| Rated voltage, V | 380 | 380 |
| Number of electric motors | 2 | until 9 |
| Milling (rounding) unit, engine power, kW | 7,5 | 11 |
| Cutter rotation speed, rpm | 4000 | 4000 |
| Feed drive motor, power, kW | — | 0,55 |
| Log rotation engine, power, kW | 2,2 | 2,2 |
| Compensation cut unit, engine power, kW | — | 2,2 |
| Circular saw diameter, mm | — | 315 |
| Saw rotation speed, rpm | — | 3000 |
| Longitudinal (mounting) groove sampling unit, engine power, kW | — | 5,5 |
| Groove cutter speed, rpm | — | 4000 |
| Electric motor for the electromechanical drive of the log clamp on the tailstock, power, kW | — | 1,5 |
| Conveyor electric motor for removing chips from under the machine, power, kW | — | 2,2 |
| Dimensions (LxWxH), m | 5.0x1.5x1.8 | up to 12.0x1.5x1.8 |
| Weight, kg | 850 | up to 1600 |
| Number of service personnel, people | 2 | 2 |
[1] - maximum diameter taking into account the curvature of the log (diameter described by the extreme points of the log during rotation). [2] - 80 mm - min. diameter of a rounded log without a longitudinal groove, or with a groove, but not for the entire length of the log (with subsequent trimming of the log), min. The diameter of a rounded log with a groove along its entire length is 120 mm. The recommended maximum diameter of the finished product for this type of machine is 250 mm.
Equipment for processing wood of small diameters
Equipment manufacturers:
- German. I worked on this type of equipment; we bought a completely new line in 2007. Eight years later she was unrecognizable
