Types and decoding of stainless steel grades. Where is stainless steel used and how is it made?

The high popularity of such a material as stainless steel is explained by its unique characteristics that ordinary carbon steel alloys do not possess. Thanks to the wide variety of stainless steel grades available on the modern market, they can be selected to successfully solve various technological problems.

The appearance of stainless steel structures does not change throughout their entire service life

What do we know about stainless steel?

Corrosion-resistant steel or stainless steel is an alloy consisting of iron and carbon, additionally enriched with special elements that give it high resistance to negative environmental factors. The main one of these elements is chromium. Stainless steel contains at least 10.5% of it. Chromium, in addition to anti-corrosion properties, gives such alloys a number of positive characteristics:

good processability by cold forming;
exceptional strength;
ability to obtain reliable connections by welding;
possibility of long-term operation without loss of its characteristics;
attractive appearance.

Chromium, contained in stainless steel in sufficiently large quantities, promotes the formation of a surface oxide film. It is this that protects the metal from corrosion.

Stainless steel sheet

Various grades (types) of stainless steel, and more than 250 of them have been created to date, contain in their chemical composition both chromium and a number of other alloying additives, the most common of which are nickel, titanium, molybdenum, niobium and cobalt. Naturally, steels with different proportions of alloying elements in their composition have different characteristics and areas of application.

As with any other type of alloy, carbon is an essential element in stainless steel. It is this element that gives the resulting metal alloy hardness and strength.

Today, it is impossible to imagine almost any industry without the use of stainless steel. Grades of this alloy, all of which are distinguished by the ability to successfully operate even in the most aggressive environments, are used for the production of cutlery and medical instruments, containers for food liquids and products, pipes for transporting aggressive media, household appliances, and much more.

Stainless steel rods

What is the function of alloying elements in corrosion-resistant grades?

The main elements present in stainless steel:

Chromium. Increases resistance to various types of corrosion, hardness, and strength. Slightly reduces ductility.
Nickel. Increases corrosion resistance, strength characteristics, ductility, and hardenability.
Manganese. When the content is more than 1%, it increases hardness, wear resistance, and resistance to sudden mechanical loads.
Titanium. Increases strength, machinability, corrosion resistance, and refines grain.
Niobium. Improves corrosion resistance of welds, increases the ability to contact acidic environments.

What is included in stainless steel?

chemical composition of stainless steel

A few words about the “ingredients” used in the “cooking” of stainless steel. Or more precisely about alloying elements and their properties. By the way, steel is divided according to the degree of alloying. Austenitic corrosion-resistant steels are classified as high-alloy steels, since the total mass fraction of alloying elements is at least 10%, and the iron content is more than 45%. Let's continue the story about austenitic high-alloy chromium-nickel stainless steel 08Х18Н10, also known as AISI 304, which has alloying elements totaling approximately 28% (18% chromium and 10% nickel). This stainless steel is an alloy in which chromium (Cr) with nickel (Ni) and several other elements are added to iron (Fe) and carbon (C) during smelting. Carbon is responsible for hardness and strength, reducing toughness and ductility. A high carbon content will begin to reduce the cold brittleness threshold and can lead to difficulty welding the metal. Directly in imported stainless steel AISI 304, in contrast to its domestic counterpart, the percentage of carbon is much lower. Chromium in the alloy plays the role of the main “defender” in the fight against corrosion caused by exposure to aggressive environments and various temperatures. Since, thanks to chromium interacting with oxygen, a thin passive film of chromium (III) oxide Cr2O3 is formed due to the adsorption of oxygen occurring on the surface without destroying the crystal lattice of the original metal. This passive film, uniform in composition and evenly distributed over the entire surface of the metal, contributes to the appearance of stainless properties. Chromium, interacting with nickel, provides a stable austenitic structure, which contributes to high ductility, hardenability, good stampability and weldability of products. Nickel increases corrosion properties and prevents metal grain growth when heated. Chromium also increases the heat resistance of nickel, which, in turn, lowers the threshold of cold brittleness, which allows the use of stainless steel 08Х18Н10 in the temperature range from cryogenic -196 °C to high 800 °C. At temperatures above this value, metal oxidation occurs, accompanied by scaling and decarburization of the steel with complete volatilization of the protective passive film.

Speaking about the contact of AISI 304 stainless steel with food, I would like to note the influence of chromium and nickel. The combination of these two components in the alloy increases the corrosion properties and allows the use of products in aggressive environments. Although each product on store shelves has its own acidity levels, the acidic environment formed during the cooking process when interacting with stainless steel, even under the influence of temperatures during heat treatment of products, becomes insufficiently aggressive to affect or damage the integrity of the protective passive film layer , with which the steel is coated. And this, in turn, prevents the release of any harmful impurities from the metal that can interact with products. Therefore, steel can come into contact with food without any consequences.

Magnetic stainless steel

AISI 430 steel (analogous to 08X17, which contains 15% chromium) has magnetic properties. It is used to produce wire mesh, pipes for transporting petroleum products, and elements of gas and oil refining process plants. Steel grade AISI 630 contains up to 5% nickel and chromium, as well as a large number of additives: copper, titanium, molybdenum. It is used in instrument making and metallurgy.

Stainless steel can be identified even if it is magnetic. To do this, place a sample of the material in 2% vinegar or another aggressive medium for 1–2 days. Corrosion-resistant alloys will pass this test without visible changes, but metals that are susceptible to corrosion will darken.

Copper sulfate will also help determine magnetic stainless steel at home. First clean the metal surface with sandpaper, and then apply a few drops of a concentrated substance (rusting alloys are covered with a red film).

Physical properties of stainless steel

A patent for stainless steel was issued in 1913 in Great Britain. Its creator was metallurgist Harry Brearley. The invention gave a huge impetus to the development of steel and other industries.

Stainless steel gained its popularity due to its wide variety of physical properties, including anti-corrosion. New steels are made with the addition of various types of impurities to the main component. The physical properties of stainless steel depend on the type and volume of additives.

During long-term use, a number of grades of stainless steel can succumb to corrosion. This is influenced by the impurities of various metals included in its composition. However, such alloys also have a number of advantages, due to which the likelihood of oxidation is no longer so serious.

The main physical properties of stainless steel, which distinguish it from some other metals, are:

Strength. This quality of steel allows us to produce products that compare favorably with analogues. Resistance to physical stress prevents the product from deforming, maintaining its original appearance for a long time. The reliability of high-quality stainless steel lasts up to 10 years.
Resistance to aggressive environments. External conditions have virtually no effect on the material, which makes it possible to use it for a long time while maintaining all its properties.
Heat resistance. All products made from this metal are highly resistant to temperature effects, including direct heating by fire. They do not change their size, shape, or properties in the event of large temperature changes.
Environmental Safety. The anti-corrosion properties of the material prevent it from oxidizing. The metal does not contain components harmful to health, which makes it possible to use it in the food industry.
Anti-corrosion properties. They are basic for stainless steel and prevent rust from appearing on the metal. Moreover, even alkalis and acids cannot affect the occurrence of corrosion.
Appearance of products. It is very different from products made from other metals. The surface of the products continues to remain shiny and clean for a long time.
Compliance. Processing stainless steel is quite simple. It is easy to make a product of the required shape from this metal.

Before choosing a metal with given physical properties, you should determine the purposes for which it is needed. Scientists have developed many different components and impurities that help make a metal with desired characteristics.

Spark test

Testing metal for spark color is a common method of sorting scrap metal, which is used even by specialists. The grade of stainless steel can be determined by the following factors:

the number of sparks and flashes, which is directly proportional to the volume of carbon in the alloy;
the color of the sparks, which indicates the composition of the metal (the lighter it is, the higher the likelihood that this is low-carbon steel);
the presence of shiny white sparks, which indicates a high titanium content in the composition.

Advantages of stainless steels

With the development of economic, scientific and technological progress, the requirements for the quality of materials used in areas of the national economy are growing.

Advantages of alloy metals:

High level of anti-corrosion properties.
Compliance with the standards stipulated by fire safety regulations.
Reliability, long service life without changing technical characteristics.
Ideal combination with any building materials.
Variety of surfaces: polished, polished, matte, decorative.
Wide selection of rolled metal products.
Ease of processing, molding, and assembly of parts made from this type of steel.
A wide range of brands with unique properties.
Environmental safety, hygiene.

How to evaluate quality?

The quality of stainless steel depends on various factors - from the amount of additives to the joining method. In places where welds are formed, the anti-corrosion properties of the metal deteriorate significantly, which over time leads to the appearance of rust and gradual destruction of the material. Painted profiled sheets will have to be cleaned of the coating and sanded, damaging the protective layer on the surface. Accordingly, the metal will become less resistant to moisture, its quality will deteriorate, and therefore the price of such scrap will be lower. You can preliminary evaluate the properties of steel using a salt solution. It should not leave stains on the surface of high-alloy steel. And water will leave yellowish stains on low-quality stainless steel.

Why do you need to know the decoding of steel grades?

Anyone whose work is related to metals has had to deal with the concept of “steel grade”. Decoding the markings allows you to find out the chemical composition and physical properties of the alloy. Although at first glance the marking may seem quite complex, it is easy to understand. To do this, you need to understand the principle of its composition.

For such a brief description of the alloy, letters and numbers are used to indicate the chemical elements and their quantities. This means that for competent work with steels, it is important to know the abbreviations themselves and how each element changes the properties of the finished alloy. Then it will be possible to determine with utmost precision what technical characteristics a certain grade of steel has.

Having received an order for a product, designers develop a design and also select the most suitable steel grades for a particular case, based on decoding their properties. The device being created must function under certain conditions, so it is examined during movement - this is how it is possible to understand which parts will experience increased loads.

To establish requirements for the strength of elements, calculations are made. At the next stage, the metal is selected in accordance with steel grades according to GOST, which can withstand repeated loading and friction. The greater the load the product experiences, the more limited the designer is in choosing the material. Next, a prototype of the device is made from the selected metal and tested in accordance with the methods used in a particular area. At this stage, the steel grade can be changed. Let us note that most often steel is used for the manufacture of machines, devices and complex mechanisms.

Regardless of the specific area, working with metals requires an understanding of their grades, purposes and other characteristics displayed in the index. Thanks to the numbers and letters used in the code, it is possible to quickly understand the characteristics of the metal without requiring additional clarification. This article outlines the fundamental principle of classification, as well as a simple way to read the markings of the steels most common in production.

What does the price depend on?

Low-carbon, corrosion-resistant alloys are used to produce a wide variety of products: blades, profiled sheets, roofing materials, medical supplies. Scrap stainless steel can be collected when dismantling an old fence, dismantling an old refrigerator, throwing away unnecessary kitchen utensils, etc. In this case, potential income will depend on the following factors:

type of steel (austenitic, ferritic, martensitic, etc.);
steel grade (AISI 304, AISI 630, 12Х21НБТ);
type of rolled metal (sheet, section, pipe);
sheet thickness;
compound;
quality.

You can determine the stainless steel brand and composition in a laboratory setting by contacting a reliable collection point. We have the necessary equipment to analyze the composition, assess the quality and test the radiation activity of non-ferrous scrap. But you can pre-evaluate scrap metal at home.

Steel marking - the meaning of digital and letter indices

Knowing the designation of letter indices and the semantic meaning of the numbers used in steel marking, one can draw conclusions about the need for the proposed grade for a specific purpose, without even looking in the reference book. Overpay for the titanium contained in the alloy if you do not need the high fire-resistant properties acquired by alloying with this expensive metal.

Some letter indices can change the designating element, depending on its location in the marking. Consider the correspondence of letter indices:

A (at the beginning of the marking) – S
A (in the middle of the marking) – N
B – Nb
B – W
G – Mn
D – Cu
E–Se
K – Co
M – Mo
N – Ni
P–P
P–B
C – Si
T – Ti
F – V
X – Cr
C – Zr
Yu – Al
h – REM

The amount of each of them in the alloy is determined by the numerical value following the letter indicating the element. Expressed as a percentage. In cases where an individual element is small, less than 1%, the number is not placed after the letter index. Carbon, as an important element, is located in front of the marking, but is expressed in hundredths of a percent.

FeNi and Ni alloys are marked only with letter indices. The exception is the number after nickel (mass fraction) and carbon (FeNi only).

If the steel was produced using special smelting methods or remelting methods, this is indicated with a hyphen after the marking. Such special methods and methods include various methods of vacuum remelting, electron beam melting, treatment with slags of synthetic origin, and others. The total number of specific methods for obtaining the required grade of alloy is specified in the standard: 24.

Let's look at examples of deciphering the markings of stainless steels 05Х12Н2М and 04Х14Т3Р1Ф-ВД. 05Х12Н2М contains 0.05% carbon, 12% chromium, 2% nickel, and up to 1% molybdenum content. 04Х14Т3Р1Ф-ВД stands for: carbon 0.04, 14% chromium, 3% titanium, 1% boron, vanadium less than 1% percent, obtained by vacuum arc remelting.

The most expensive types of stainless steel

The cost is affected by the amount of nickel in the alloy: in the cheapest types its content does not exceed 5%. The most expensive are high-alloy alloys containing nickel from 12%. The expensive scrap includes plumbing fittings and rings, wire and various electrical connectors (connectors, adapters, etc.). Matte (a by-product of non-ferrous metallurgy) with a nickel content of over 35% is also highly valued, although it is classified as slag.

But the most common steel grade is A2, containing approximately 10% nickel and 18% chromium. It is usually used to make household items. To find out the exact price, visit our collection point: to evaluate scrap, specialists must inspect the metal, assess the degree of contamination, composition and properties.

Source

AISI stainless steel marking

AISI marking is increasingly appearing not only on steel products from overseas, but also on Chinese, Russian, European and other products. This classification system takes its name from its birthplace, the American Iron and Steel Institute. The classifier was liked by consumers, manufacturers, and traders.

Classification

The grade of carbon and alloy steel is presented as a four-digit expression. The first digit in it indicates the main alloying component. The second digit identifies the secondary alloying element. The third from fourth digits indicate the carbon content.

1ZZZ–C
2ZZZ –Ni
3ZZZ –Cr+Ni
4ZZZ –Mo
5ZZZ–Cr
6ZZZ - Cr+V
7ZZZ –W
8ZZZ –Ni+Cr+Mo
9ZZZ –Si+Mn

The letter L at the end of the marking indicates reduced carbon content. The same letter in the middle of the marking indicates alloying of the alloy with lead to improve the mechanical properties of steel processed on machines. N at the end of the marking means nitrogen treatment to increase tensile strength, all other things being equal. The letter B in the middle of the marking is boron doping.

Modern industry identifies at least 150 brands by AISI. Let's look at the key, popular steel grades and where they are used.

300 series (family of chromium-nickel alloys)

301 - suitable for products with high ductility, characterized by rapid hardening under mechanical influence. Wear-resistant, increased fatigue strength
304 is the most widely used grade, which has found application in almost all industries
310 – heat-resistant, with the ability to work in aggressive environments at high temperatures (1000 degrees Celsius in oxidative, up to 10,000 in reducing). 310S is suitable for furnace elements in contact with high temperature gases and condensate
316 is a steel that holds second place after 304 in terms of application. A favorite brand for the production of equipment for food processing, for surgical instruments, units, modules operating in salt water. Resistance to pitting corrosion
321 - for the needs of chemists, the oil industry, welding equipment requiring use at temperatures up to 800 degrees

400 series (ferritic and martensitic steels)

405 Ferrite Matrix Welded Products
408-heat resistant
409 is the most affordable grade of stainless steel, used for car exhaust systems
416 - Easily processed on automatic machines due to the additional sulfur
420 - the main purpose of making cutlery, excellent polishing
430-ferritic matrix, can be processed by pressure, is resistant to corrosion, used in automotive finishing
440 - used for high-quality cutlery, a higher amount of carbon allows knives made from this steel to remain sharp longer, with proper heat treatment

Episode 500

The 500 series contains chromite heat-resistant steel grades.

Episode 600

600 series - was originally created for patented steel grades that do not fall under classification. Today the subsection looks like this:

601-604 – martensitic low-alloy
610-613 – martensitic secondary hardening
614-619 – martensitic with chromium
630-635 – half-austenitic with compacted martensite. Used for pipes, pumps, valves. Corrosion resistance is close to 304
650-653 – austenitic steels operating under large temperature differences
660-665 – austenitic heat-resistant.

The information presented on this page will help you select the required grade of stainless steel in accordance with its characteristics and capabilities. Steel grades are classified according to two main classifiers GOST5632-2014, AISI. Examples explain the marking of stainless steels and alloys. The areas of application of key and popular brands in manufacturing industries are given.

Stainless steel strength class A2, A4

For example, the designation on the head: A2-70, A4-70

Group	steel grade	Diameters, mm	Strength class	Tensile strength, N/mm2	Limit fluidity N/mm2	Elongation at break, mm
Austenitic	A2, A4	up to M39 incl.	50	500	210	0.6d
Austenitic	A2, A4	up to M24 incl.	70	700	450	0.4d
Austenitic	A2, A4	up to 24 incl.	80	800	600	0.3d

Classification

Based on their chemical composition, stainless steels are divided into:

There are austenitic stainless steels, which are prone to intergranular corrosion, and stabilized ones - with Ti and Nb additives. A significant reduction in the susceptibility of stainless steel to intergranular corrosion is achieved by reducing the carbon content (up to 0.03%).

Stainless steels that are prone to intergranular corrosion are usually subjected to heat treatment after welding.

Alloys of iron and nickel are widely used, in which, due to nickel, the austenitic structure of iron is stabilized, and the alloy turns into a weakly magnetic material.

Martensitic and martensitic-ferritic steels

Martensitic and martensitic-ferritic steels have good corrosion resistance in atmospheric conditions, in slightly aggressive environments (in weak solutions of salts, acids) and have high mechanical properties. They are mainly used for products subject to wear, as cutting tools, in particular knives, for elastic elements and structures in the food and chemical industries that are in contact with slightly aggressive environments. This type includes steel types 30Х13, 40Х13, etc.

Ferritic steels

These steels are used for the manufacture of products operating in oxidizing environments (for example, in nitric acid solutions), for household appliances, in the food industry, light industry and for heat exchange equipment in power engineering.

Ferritic chromium steels have high corrosion resistance in nitric acid, aqueous solutions of ammonia, ammonium nitrate, a mixture of nitric, phosphoric and hydrofluoric acids, as well as in other aggressive environments. This type includes steels of the 400 series.

Austenitic steels

The main advantage of austenitic steels is their high performance characteristics (strength, ductility, corrosion resistance in most working environments) and good manufacturability. Therefore, austenitic corrosion-resistant steels have found wide application as a structural material in various branches of mechanical engineering. Theoretically, products made from austenitic stainless steels are non-magnetic under normal conditions, but after cold deformation (any mechanical treatment) they can exhibit some magnetic properties (part of the austenite turns into ferrite).

Austenitic-ferritic and austenitic-martensitic steels

Austenitic-ferritic steels

The advantage of steels in this group is an increased yield strength compared to austenitic single-phase steels, a lack of tendency for grain growth while maintaining a two-phase structure, a lower content of highly deficient nickel and good weldability.

Austenitic-ferritic steels are widely used in various branches of modern technology, especially in chemical engineering, shipbuilding, and aviation. This type includes steel types 08Х22Н6Т, 08Х21Н6М2Т, 08Х18Г8Н2Т.

Austenitic-martensitic steels

The needs of modern technology for corrosion-resistant steels with increased strength and manufacturability have led to the development of martensitic (transitional) class steels. These are steel types 07Х16Н6, 09Х15Н9У, 08Х17Н5М3.

Iron-nickel and nickel-based alloys

In the manufacture of chemical equipment, especially for work in sulfuric and hydrochloric acids, it is necessary to use alloys with higher corrosion resistance than austenitic steels. For these purposes, alloys based on iron-nickel base type 04ХН40МДТУ and alloys based on nickel-molybdenum base N70MF, chromium-nickel base KHN58V and chromium-nickel-molybdenum base KHN65MV, KHN60MB are used.

Domestic grades of stainless steel

The modern market offers different grades of stainless steel for use in different industries.

06ХН28МДТ

Stainless steel 06ХН28МДТ is used for the manufacture of welded chemical equipment operating at temperatures up to 80 degrees in highly aggressive environments.

Chemical composition and decoding 06ХН28МДТ, %

Ni - 26-29
Cr - 22-25
Cu - 2.5-3.5
Mo - 2.5-3
Si - ≤0.8
Mn - ≤0.8
Ti - 0.5-0.9
C — ≤0.06
P — ≤0.035
S — ≤0.02
Fe - rest.

The alloy can be welded manually or automatically.

Imported analogue 06ХН28МДТ - AISI 904L

08Х17Н13М2Т

One of the popular options for domestic stainless steel is grade 08Х17Н13М2Т. The composition of this brand of stainless steel is characterized by a high content of molybdenum. It is this element that increases anti-corrosion properties and allows you not to be exposed to aggressive environments. In addition, molybdenum increases resistance to high temperatures. Stainless steel of this grade is characterized by high ductility, is easily molded and does not have magnetic properties.

Scope of application of brand 08Х17Н13М2Т:

Food industry;
Chemical industry;
Manufacturing of medical products;
Manufacturing of equipment and tools.

Chemical composition and decoding 08Х17Н13М2Т, %

C - up to 0.08
Si - up to 0.8
Mn - up to 2
Ni - 12-14
S - up to 0.02
P - up to 0.035
Cr - 16-18
Mo - 2-3
Cu - up to 0.3
(5 C - 0.7) Ti
Fe - ~61

Imported analogue 08Х17Н13М2Т - AISI 316Ti

08Х18Н9

Steel 08Х18Н9 – austenitic stainless steel with a high chromium content. A widely used grade of high-alloy stainless steel. Stainless steel is characterized by high levels of heat resistance and anti-corrosion. The alloy is easy to weld. It is used in the production of steel seams, fittings, and heat exchange equipment.

Chemical composition and decoding 08Х18Н9, %

Cr - 17-19
Ni - 8-10
C - 0.8
Si - 0.8
Ti - 0.5
Cu - 0.3
Mn - 0.2
P - 0.035
S - 0.02

08Х18Н10

Stainless steel grade 08Х18Н10 also belongs to the austenitic group of alloys. It is characterized by increased strength, ductility and resistance to ultra-high temperatures. The alloy has no magnetic properties.

Scope of application 08Х18Н10

Construction;
Mechanical engineering;
Food industry;
Mining industry;
Manufacturing of rolled metal, equipment and fittings.

Chemical composition and decoding 08Х18Н10, %

Cr - 17-19
Ni - 9-11
C - 0.8
Si - 0.8
Ti - 0.5
Cu - 0.3
Mn - 0.2
P - 0.035
S - 0.02

Imported analogue 08Х18Н10 - AISI 304

08Х18Н10Т

An analogue of the previous brand is 08Х18Н10Т. High-alloy steel of this grade belongs to the austenitic group. It is a corrosion-resistant alloy and is characterized by high heat resistance. There are no magnetic properties. It is used for the manufacture of folds, heat exchange equipment, and parts of furnace fittings.

Scope of application 08Х18Н10Т

Construction;
Mechanical engineering;
Electric power industry;
Food, fuel, chemical industries.

Chemical composition and decoding of alloy 08Х18Н10Т, %

Cr - 17-19
Ni - 9-11
Mn - up to 2
Si - up to 0.8
Ti - 0.4-0.7
Cu - up to 0.3
S - up to 0.2
C - up to 0.08
P - up to 0.035
Fe - ~69

Imported analogue 08Х18Н10Т - AISI 321

08Х22Н6Т

Stainless steel 08Х22Н6Т belongs to the austenitic-ferritic group of alloys. It is an anti-corrosion alloy and does not lose its properties even when used in an aggressive environment. The scope of application of this grade of stainless steel is extensive; welded equipment and various vessels are made from it.

Chemical composition and decoding 08Х22Н6Т, %

Cr - 21-23
Si - up to 0.8
Mn - up to 0.8
Ni - up to 0.8
Cu - up to 0.3
C - up to 0.08
P - up to 0.035
S - up to 0.025
(5 C - 0.65) Ti
the rest is Fe

Any type of welding can be used on stainless steel grade 08Х22Н6Т. The weld seam is also protected from rust and external mechanical influence.

10Х17Н13М2Т

Steel 10Х17Н13М2Т belongs to the group of austenitic alloys. Basically, this brand is used in the manufacture of welded structures that are used in aggressive environments. Stainless steel retains its physical properties and characteristics even at high temperatures (up to 600 degrees).

Chemical composition and decoding 10Х17Н13М2Т, %

Cr - 16-18
Ni - 12-14
Mo - 2-3
Mn - no more than 2
Si - no more than 0.8
Ti - 0.5-0.7
Cu - no more than 0.3
P - no more than 0.035
S - no more than 0.02

Any type of welding can be used with stainless steel of this brand: manual, automatic electric arc, gas.

Imported analogue 10Х17Н13М2Т - AISI 316Ti

10Х18Н10Т

Heat-resistant stainless steel 10Х18Н10Т is used for the manufacture of parts for welded equipment operating in aggressive environments. Suitable for the production of furnace equipment, heat exchangers and pipes.

Chemical composition and decoding of 10Х18Н10Т, %

Cr - 17-19
Ni - 10-11
Mn - 1-2
Si - up to 0.8
C - up to 0.1
P - up to 0.035
S - up to 0.02
5(C - 0.02) < Ti < 0.6

10Х23Н18

Stainless steel 10Х23Н18 belongs to the austenitic group of alloys. High-alloy, high-temperature resistant stainless steel. Thanks to special elements, grade 10Х23Н18 is plastic, and parts of any shape can be made from it. It is used in the manufacture of pipes, tubular and sheet parts, as well as in the production of fittings.

Chemical composition and decoding 10Х23Н18, %

Cr - 22-25
Ni — 17-20
Mn - up to 2
Si - up to 1
Cu - 0.035
Ti - 0.3
C - up to 0.1
S - up to 0.02
P - up to 0.02

Imported analogue 10Х23Н18 - AISI 310S

12Х18Н9

Stainless steel 12Х18Н9 is a high-alloy, corrosion-resistant and heat-resistant stainless steel. Belongs to the group of austenitic alloys. Stainless steel is a universal material and has a high level of strength. Steel is weakly magnetic. It is used in the manufacture of parts that subsequently undergo a hardening stage: parts of furnace fittings, heat exchangers, rotors, couplings. The stainless steel of this brand can withstand both low and high temperatures. Operating temperature range from –196 to +800 degrees.

Chemical composition and decoding of 12Х18Н9, %

Cr - 17-19
Ni - 8-10
Mn — ≤ 2
Si - ≤ 0.8
Ti - ≤0.5
Mo - ≤0.5
Cu - ≤0.3
C — ≤ 0.12
P — ≤0.035
S — ≤0.02
Fe - base, about 70

Imported analogue 12Х18Н9 - AISI 301, 302, 303, S30200

12Х18Н9Т

Stainless steel 12Х18Н9Т is an improved version of the previous grade. The alloy contains a larger amount of titanium, which increases the technical properties of the material. Titanium increases the strength of the metal and resistance to intercrystalline corrosion. Stainless steel of this brand is the basis for the manufacture of rolled metal products. It is used to produce wire, rods, tapes, and pipes.

Steel does not come into contact with other materials, due to which it can be used in the food and medical industries. After heat treatment, stainless steel becomes non-magnetic.

Chemical composition and decoding of 12Х18Н9Т, %

Cr - 17-19
Ni - 8-9.5
Mn — ≤2
Si - ≤0.8
Mo - ≤0.5
Cu - ≤0.3
C — ≤0.12
P — ≤0.035
S — ≤0.02
Ti - 5*C - 0.8
Fe - base, about 70%

Imported analogue 12Х18Н9Т - AISI 321

12Х18Н10Т

12Х18Н10Т – austenitic stainless steel. Corrosion-resistant steel, which has found its application in various industries. But, first of all, steel grade 12Х18Н10Т is used in the food, pharmaceutical and chemical industries. In addition, it is popular in the petrochemical industry, mechanical engineering, and energy.

The properties and characteristics of the finished product made from this grade of stainless steel are such that it is resistant to aggressive environments and can be used at high temperatures. 12x18n10t is used to produce welded apparatus and vessels, as well as water pipes.

Chemical composition and decoding 12Х18Н10Т, %

Cr - 17-19
Ni - 9-11
Mn - no more than 2
Si - no more than 0.8
Ti - 0.6-0.8
Cu - no more than 0.3
P - no more than 0.035
S - no more than 0.02

Imported analogue 12Х18Н10Т - AISI 321, 321H

12Х18Н12Т

Stainless steel 12Х18Н12Т is a popular brand among chromium alloys. The material resists corrosion in aggressive environments and has a high level of resistance to high temperatures. Belongs to the type of austenitic alloys. High-alloy steel is used in the manufacture of parts operating at elevated temperatures. Stainless steel can be used in aggressive environments.

Chemical composition and decoding 12Х18Н12Т, %

Cr - 17-19
Ni - 11 - 13
Mn - up to 2
Si - up to 0.8
Cu - up to 0.3
C - up to 0.12
P - up to 0.035
S - up to 0.02
(5 C - 0.7) Ti
the rest is Fe

14Х17Н2

Stainless steel grade 14Х17Н2 belongs to the martensitic-ferritic group of alloys. Stainless steel is difficult to weld and is prone to temper brittleness. It is used to produce work equipment, machine parts, and pipeline fittings.

Chemical composition and decoding of steel 14Х17Н2, %

Cr - 16-18
Ni - 1.5-2.5
Si - 0.8
Mn - 0.8
Cu - 0.3
C - 0.11-0.17
P - 0.03
Ti - 0.2

Imported analogue 14Х17Н2 - AISI 431

20Х23Н18

High-alloy steel 20Х23Н18 is a heat-resistant material. Used for the production of individual combustion chambers, clamps, suspensions, and fastening parts. Seamless pipes are also made from steel of this grade, which will be used at high temperatures.

Chemical composition and decoding 20Х23Н18, %

Cr - 22-25
Ni — 17-20
Mn - no more than 2
Si - no more than 1
Cu - no more than 0.3
Ti - no more than 0.2
P - no more than 0.035
S - no more than 0.02

Imported analogue 20Х23Н18 - AISI 310

08Х13

Stainless steel 08Х13 belongs to the group of ferritic alloys. It has good corrosion resistance and can withstand high temperatures. It is used for the manufacture of parts used in mildly aggressive environments: valves, bolts, steam turbine blades.

Chemical composition and decoding 08Х13, %

Cr - 12-14
Si - 0.8
Mn - 0.8
Ni - 0.6
C - 0.08
P - 0.03
S - 0.025

Imported analogue 08X13 - AISI 403, 409, 410S, 429

08Х17

Stainless steel grade 08Х17 also belongs to the ferritic group of alloys. It is characterized by a high chromium content, due to which the material becomes even stronger. Stainless steel 08X17 is used in mechanical engineering, food and chemical industries. The material functions well in oxidizing and atmospheric conditions.

Chemical composition and decoding 08Х17, %

Cr - 16-18
Si - 0.8
Mn - 0.8
Ni - 0.6
C - 0.08
P - 0.03
S - 0.025

Imported analogue 08X17 - AISI 430

08Х17Т

An improved version of 08x17 is stainless steel grade 08X17T. In terms of their technical characteristics, they are identical, the difference between the alloys is only in the percentage of elements. This brand also contains titanium, which increases strength and ductility.

Chemical composition and decoding 08Х17Т, %

Cr - 16-18
Si - 0.8
Mn - 0.8
Ti - 0.8
Ni - 0.6
C - 0.08
P - 0.035
Cu - 0.03
S - 0.025

Imported analogue 08Х17Т - AISI 430, 439

12Х13

Chromium stainless steel 12X13 is a rather brittle material that is difficult to weld. Belongs to the martensitic-ferritic class. It is corrosion-resistant, heat-resistant and heat-resistant stainless steel. Steel has found its application in the production of parts with increased ductility: steam turbine blades, boiler parts, compressor blades, and aircraft parts. The alloy is intended for use under conditions of shock loads and high temperatures.

Chemical composition and decoding of steel 12Х13, %

Cr - 12-14
Si - 0.8
Mn - 0.8
Ni - 0.6
C - 0.1
P - 0.03
S - 0.025

Imported analogue 12Х13 - AISI 410

12Х17

For the manufacture of parts for fastening equipment and products for mechanical engineering, stainless steel grade 12X17 can be used. According to its characteristics, the alloy belongs to the ferritic group. This grade of stainless steel does not lose its properties, even when exposed to acids and salt solutions. The material is difficult to weld and prone to temper brittleness.

Chemical composition and decoding of steel 12Х17, %

Cr - 16-18
Si - 0.8
Mn - 0.8
C - 0.12
P - 0.035
S - 0.025

Imported analogue 12Х17 - AISI 430

20Х13

Characteristics of stainless steel grade 20Х13: belongs to the martensitic class of alloys, intended for the manufacture of power engineering parts, furnace equipment, various fasteners and fittings. Stainless steel is difficult to weld and is prone to temper brittleness.

Chemical composition and decoding of steel 20Х13, %

Cr - 12-14
Si - 0.6
Mn - 0.6
Ni - 0.6
C - 0.2
P - 0.033
S - 0.025

Imported analogue 20X13 - AISI 420

30Х13

Characteristics of steel 30Х13: corrosion-resistant, heat-resistant and heat-resistant material. Belongs to the martensitic class. The material is not suitable for welding. Stainless steel has found its application in the manufacture of springs, compressor parts and other devices. When working in a slightly aggressive environment, this is a highly wear-resistant stainless steel grade.

Chemical composition and decoding of steel 30Х13, %

Cr - 12-14
Si - 0.8
Mn - 0.8
Ni - 0.6
C - 0.3
Cu - 0.3
Ti - 0.2
P - 0.03
S - 0.025

Imported analogue 30X13 - AISI 420S, 420F

Food grade stainless steel according to GOST

There is no official concept of food grade or technical stainless steel. This is the name given to any brand that is suitable for making cookware. Requirements for products intended for contact with products are set out in GOST 27002-86.

The list of possible alloys includes grades with an amount of carbon of at least 12%, chromium of at least 13%, possible presence of nickel in an amount of 5-13%, and molybdenum of about 2%.

Their selection is influenced by the following criteria:

will the cookware be used for cooking?
how long the contact is expected to last.

Also, there are no alloys that are used only for the manufacture of dishes, cutlery, etc. Dishes, pipes and tools can be made from the same grade. In this case, the final thermomechanical treatment can be applied in the same way.

Preferably, 12X13 stainless steel is used to make utensils that do not come into contact with food for a long time and are not subject to shock or heat.

Grade 12Х18Н10Т is a classic version of food-grade stainless steel, and since it is used in the mass production of not only tableware, its second name is medical steel.

Steel grades for food supplies

The classification of brands is carried out according to series, which indicate the internal structure after the final thermomechanical processing of the product.

There are 3 series that determine the properties of stainless steel:

Episode 400

— martensitic-ferritic stainless steel. They are distinguished by high manufacturability, i.e., good workability by pressure (rolling, stamping), and weldability. These grades contain 8-40% (on average 12%) carbon, and the main and only alloying element is chromium, contained in an amount of 13% (not less).

Stainless steel with a chromium content of 13-17% has a number of disadvantages: they are classified as weakly rusty, since with prolonged contact with water or mildly aggressive acids, pitting corrosion may appear on the surface.

This entire series cannot be used for products exposed to low temperatures (below -40 ºС) and shock loads.

Affordability and high machinability make these brands in demand for the manufacture of technical parts, structural elements, and pipelines. Cutlery (forks, spoons), coasters, dishes, and candlesticks are no exception.

Russian classification	European equivalent
08Х13	AISI 409
12Х13	AISI 410
20X13, 40X13	AISI 420

12X17AISI 430 - used for the manufacture of dishes, cutlery, etc., limitedly used for contact with food and not intended for heat treatment.

Episode 300

— austenitic, austenitic-ferritic and austenitic-martensitic stainless steel. All grades in this series have increased corrosion resistance at temperatures up to 600 ºС (with the addition of alloying elements the temperature limit rises to 800-1100 ºС), and strength.

Nickel is added as the second alloying element in an amount of 5-13%, which contributes to obtaining an austenitic structure, and up to 2% molybdenum and/or 1% titanium are added to increase strength.

The series begins with a universal stainless steel, which is known in all spheres of human activity:

08Х18Н10 - chromium-nickel. The most commonly used steel is in the food industry.

Due to its complete inertness to water and mildly aggressive acids, it received the name “food grade”; if the carbon content in this alloy is increased to 12%, the name will sound like “medical steel”.

Intensively used in the chemical and medical industries.

10Х17Н13М2 - chromium-nickel-molybdenum alloy.

The additive of 2% molybdenum makes it durable and wear-resistant. It is also used for products in contact with food, but at high temperatures and pressure. These can be steam boilers, pipe systems for transporting liquid media. For industry, gas turbines are made from this alloy.

10Х17Н13М2Т - the previous alloy with the addition of titanium.

Titanium increases the operating temperature to 800-1100 ºС and the ability to work in aggressive environments with chlorine. Used in critical systems for the production of seamless pipes, as well as shut-off and connecting fittings for them.

Russian classification	European equivalent
10Х17Н13М2	AISI 316
10Х17Н13М2T	AISI 316 T
12-08Х1810Т	AISI 321

Episode 200

- with a predominance of only the austenite structure. Its properties are similar to both previous series, but the cost is much cheaper than the 300 series.

12X15G9ND - in this brand (it is the only one so far) nickel and molybdenum are replaced by two elements balanced in relation to each other: manganese and copper. High technology and low cost (relative to chromium-nickel brands) make this series stand out.

Russian classification	European equivalent
12X15G9ND	AISI 201

Foreign grades of stainless steel

200 series: AISI 201 and AISI 202

Steel grades AISI 201

and
AISI 202
(AISI - American Iron and Steel Institute - American Institute of Steel and Alloys) belong to the austenitic group of alloys. They contain chromium, nickel, manganese, copper and nitrogen. These steels provide a high level of strength to the finished product, are perfectly deformable and change their shape. Due to their balanced composition, steels of these grades are characterized by high anti-corrosion properties.

Stainless steel AISI 201 and AISI 202 are used in the manufacture of household appliances, pipelines and building structures.

The brands differ from each other in the percentage of additives. AISI 201 contains a higher amount of carbon, sulfur, manganese and copper, due to which high strength and ductility of steel are achieved. AISI 202 contains an increased amount of nickel. AISI 201 is considered an improved version of AISI 202. When steel is used in a moderately aggressive environment, both grades do not lose their physical properties.

Russian analogue of AISI 201 - 12Х15Г9НД Russian analogue of AISI 202 - 12Х17Г9АН4

300 series stainless steel grades

According to its chemical composition, this series can belong to the austenitic or duplex group of alloys. The type of stainless steel depends on the percentage of main additives: carbon, nickel, chromium, titanium. This series is universal. Due to its good strength, wear resistance and anti-corrosion properties, stainless steel of this group is in high demand in the market.

AISI 301

AISI 301 refers to non-magnetic steels. It has a high level of strength and ductility. Grade 301 has found its application in environments with reduced aggressiveness. Most often it is used under conditions of standard atmospheric exposure, for example, in the manufacture of parts for automobiles and railway transport, household equipment and medical equipment.

Chemical composition and interpretation of AISI 301, %

Cr - from 16 to 18
Ni - from 6 to 8
Mn - 2
Si - 1
C - 0.15
N - 0.1
P - 0.045
S - 0.03

Russian analogue of AISI 301 - 15Х17Н7

AISI 302

AISI 302 stainless steel is used for the manufacture of springs and retaining rings. The material is characterized by high strength and ductility. It is resistant to corrosion.

Chemical composition and interpretation of AISI 302, %

Cr - 17-19
Ni - 8-10
Mo - 4-5
Si - 2-3
Mn — <2
C - <0.15
N — >0.1
P - <0.045
S — <0.03

Russian analogue of AISI 302 - 12Х18Н9

AISI 303

Chromium-nickel stainless steel AISI 303 is classified as austenitic steel. The composition has an increased sulfur content, and because of this, the alloy’s resistance to corrosion is reduced. Stainless steel is non-magnetic and is optimally used in mechanical and moving components.

Chemical composition and interpretation of AISI 303, %

Cr - 17-19
Ni - 8-10
Mn — <2
Si — <1
P - <0.2
S — >0.15
C - <0.15

Russian analogue of AISI 303 - 12Х18Н9

AISI 304

304 stainless steel has become famous for its chemical composition and characteristics that allow it to be used in the food industry. In addition to the food industry, steel of this grade is used for pharmaceutical, oil, chemical and textile production. 304 stainless steel has high corrosion resistance and can be used in aggressive environments.

Chemical composition and interpretation of AISI 304, %

Cr - 18-20
Ni - 8-10.5
Mn — <2
C - <0.08
P - <0.045
S — <0.03

Russian analogue of AISI 304 - 08Х18Н10

AISI 316

AISI 316 is a grade of stainless steel containing molybdenum, which increases the material’s resistance to corrosion. The alloy is resistant to elevated temperatures. 316 stainless steel is more expensive than 304, so it is used in narrower industries: shipbuilding, aviation, oil and gas enterprises.

AISI 316Ti steel grade is enriched with titanium, which makes the material resistant to chlorine. Titanium also makes the alloy more durable and resistant to high temperatures. 316Ti has no magnetic properties. Stainless steel of this brand is mainly used in the following areas:

Equipment for the chemical and pharmaceutical industries;
Manufacturing of architectural elements and roofing structures;
Construction of heat exchangers.

Chemical composition and interpretation of AISI 316, %

Cr - 15-17
Ni - 14-16
Mo - 2.5-3
C - up to 0.03

Titanium has been added to the 316Ti grade up to 1%.

Russian analogue of AISI 316 - 03Х17Н14М3 and 04Х17Н13М2 Russian analogue of AISI 316Тi - 10Х17Н13М2Т

AISI 321

An improved version of these grades is AISI 321. This grade of stainless steel is characterized by a high titanium content, it contains almost 10%. The alloy is easily amenable to any type of processing and is resistant to elevated temperatures, up to 800 degrees.

AISI 321 stainless steel is used in the production of seamless pipes, in the manufacture of seam products and boilers, as well as in the construction of furnace systems. Steel 321 is used in mechanical engineering, shipbuilding, and aviation.

Chemical composition and interpretation of AISI 321, %

Cr - 17-19
Ni - 9-11
Mn — <2
Ti — <1
Si - <0.8
Cu - <0.3

Russian analogue of AISI 321 - 08Х18Н10Т

Stainless steel grades 400 series

The main feature of stainless steels in this group is considered to be a low percentage of carbon additives and the presence of a large amount of chromium. This affects the cost of stainless steel grades of this series; it is lower than the 200 and 300 series.

The 400 series is popular in industrial applications where it is necessary to form various structures. This is due to the low carbon content, which allows the alloy to be ductile.

AISI 403

According to its characteristics, the alloy belongs to the martensitic-ferritic group. Stainless steel is characterized by increased ductility and resistance to high temperatures. Finished parts can withstand loads in a slightly aggressive environment.

Chemical composition and interpretation of AISI 403, %

Fe - 86
Cr - 12.3
Mn - 1
Si - 0.5
C - 0.15
P - 0.04
S - 0.03

Russian analogue of AISI 403 - 15Х12

AISI 409

AISI 409 differs from AISI 403 in its increased chromium content and the addition of nickel. This allows this brand of stainless steel to be amenable to all types of processing. Finished products are characterized by plasticity. AISI 409 is used to make parts that will be subject to shock loads during operation: press and pump valves, household items. AISI 409 is also used in the manufacture of products exposed to mildly aggressive environments: steam turbine blades, valves, bolts and pipes.

Chemical composition and decoding of AISI 409,%

Fe - ~84
Cr - 12 - 14
Mn - up to 0.8
Si - up to 0.8
Ni - up to 0.6
C - up to 0.08
P - up to 0.03
S - up to 0.025

Russian analogue AISI 409 - 08Х13

AISI 410

AISI 410 stainless steel is ductile and durable. It withstands high temperatures without changing its characteristics even at 500 degrees. This grade of stainless steel does not corrode in aggressive environments. This grade of steel is used to make parts that will be used at high temperatures.

Chemical composition and interpretation of AISI 410, %

Cr - 13.5
Mn - 1.0
Si - 1.0
Ni - 0.6
C - 0.15
P - 0.045
Si - 0.03

It is used for the manufacture of cutting tools, turbine and boiler parts, and kitchen utensils. Suitable for use in thermal and separation screens, filters.

Russian analogue AISI 410 - 12Х13

AISI 416

AISI 416 belongs to the martensitic stainless steel group. Sheet metal, metal profiles, and pipeline products are made from it.

Chemical composition and interpretation of AISI 416, %

Cr - 12-14
Mn - 1.25
Si - 1
Se — >0.15
C - 0.15
P - 0.06
S - 0.06

AISI 420

Characteristics of AISI 420 steel: increased level of wear resistance, heat resistance and anti-corrosion. The cost of the alloy is significantly lower than that of other brands in this series, since it does not contain expensive elements.

Chemical composition and decoding AISI 420,%

Fe - ~84
Cr - 12-14
Si - up to 0.6
Mn - up to 0.6
Ni - up to 0.6
C - 0.35-0.44
P - up to 0.03
S - up to 0.025

This combination of elements allows us to achieve good physical properties of stainless steel. The alloy belongs to the martensitic group. This brand is in demand in various industries: food, chemical, construction.

Russian analogue of AISI 420 - 40Х13

AISI 430

AISI 430 steel is considered the most corrosion-resistant alloy. The grade belongs to the group of ferritic steels. A balanced composition and good performance characteristics are the advantages of AISI 430 stainless steel. The absence of expensive elements makes the steel affordable and in demand.

Chemical composition and decoding AISI 430,%

Fe - ~81
Cr - 16-18
C - up to 0.12
Si - up to 0.8
Mn - up to 0.8
P - up to 0.035
S - up to 0.025

Area of application of AISI 430:

Oil industry;
Food industry;
Construction;
Mechanical engineering;
Chemical industry.

Russian analogue AISI 430 - 12Х17

AISI 439

AISI 439 is a stainless steel belonging to the ferritic group. Does not contain nickel and is stabilized with titanium. It is characterized by high levels of corrosion resistance in various moderately aggressive and aggressive environments.

The AISI 439 brand is used in mechanical engineering, food industry, architecture and construction. Internal and external fittings and service tools are made from stainless steel.

Chemical composition and interpretation of AISI 439, %

Fe - ~79
Cr - 16-18
Si - up to 0.8
Mn - up to 0.8
Ti - up to 0.8
Ni - up to 0.6
Cu - up to 0.3
C - up to 0.08
P - up to 0.035
S - up to 0.025

The presence of aluminum and titanium in AISI 439 stainless steel, combined with a reduced carbon content, guarantees its good plastic and strength properties.

Russian analogue AISI 439 - 08Х17Т

AISI 441

AISI 441 steel belongs to the group of ferritic alloys. 441 stainless steel is stabilized with titanium and niobium. The composition contains a large amount of chromium, making it a corrosion-resistant grade of stainless steel. Advantages of the AISI 441 brand:

Low coefficient of thermal expansion;
High level of thermal conductivity;
Inertial overheating of the material is not allowed.

Chemical composition and interpretation of AISI 441, %

Cr - 16-18
Si - up to 0.8
Mn - up to 0.8
Ti - up to 0.8
Ni - up to 0.6
Cu - up to 0.3
C - up to 0.08
P - up to 0.035
S - up to 0.025

AISI 441 stainless steel is used in the automotive industry, in the production of heat exchangers and pipes, and for the construction of architectural elements. The material is suitable for the manufacture of exhaust systems. Steel welding is carried out at low temperatures. The alloy can be used at temperatures of 500-800 degrees.

Heat resistant stainless steel

The category of heat-resistant materials includes alloys that are capable of maintaining their structure and not changing their quality characteristics when exposed to temperatures above 550º C. The chemical composition and marking of this type is regulated by GOST 5632 - 2014. According to the production method, such stainless steel can be cast or deformable.

Metals vary in their ability to withstand certain loads at high temperatures. In accordance with these indicators, three types of stainless steel are distinguished.

Heat resistant stainless steel. Does not corrode at 600°C.
Heat resistant. Shows inertness to aggressive media at temperatures above 550°C.
Heat resistant. Resists mechanical loads at 400 - 850°C.

In terms of composition, materials with increased heat resistance are:

Martensitic. Brands produced using perlite additives. The mixture of metals is hardened at 950 - 1100 ºС. The resulting alloys contain more than 0.15% carbon, 11-17% chromium and small amounts of nickel, tungsten, molybdenum, and vanadium. They do not react with alkalis and acids. Prolonged exposure to a humid environment does not affect their technical characteristics.
Austenitic. Steels have a homogeneous or heterogeneous structure. The homogeneous composition, which is not subjected to hardening, contains an increased amount of carbon and a maximum of alloying elements: Ni, Cr, Mn, Mo, V, Nb. Such alloys are resistant to temperatures up to 500°C. This class includes: 06Х14Н6Б, 08Х18Н12Т, 20Х23Н18, 07XI6H9M2. Heterogeneous grades undergo hardening and aging during the production process. This is necessary for the formation of carbide, carbide-nitride and intermetallic compounds. They strengthen the boundaries of the matrix and impart the necessary heat resistance to the alloy at temperatures from 700 to 750°C. Representatives of this type are steels: 08Х17Н13М2Т, 20Х25Н20С2, 45Х14Н14В2М.
Nickel and cobalt. These are some of the best heat-resistant materials, capable of maintaining all technical parameters unchanged at temperatures up to 900°C. These grades are divided into homogeneous and heterogeneous alloys. These include: KHN77TYU, KHN55VMTFKYU, KHN70MVTYUB.

Metals and alloys that are often confused

The silver alloy of iron and chromium is suitable for the production of kitchen utensils, medical instruments, bearings, cutting elements, etc. But these items are also made from the following materials:

nickel-plated brass (a white copper alloy with a zinc content of more than 25%);
cupronickel (silver-white metal made from an alloy of copper and nickel);
white copper (an alloy containing at least 25% nickel).

Polished aluminum, nichrome, nickel silver and other alloys used for the production of cookware, knives, and jewelry can easily be confused with alloy steel. Despite their similar composition and high nickel content, they are easily distinguished at a scrap metal collection point and will not be accepted at the desired price. There are several ways to determine whether aluminum or stainless steel has fallen into your hands: chemical, mechanical, etc.

Application

The listed advantages contribute to maintaining a leading position in the rolled metal market. Anti-corrosion alloys are an indispensable material in heavy engineering, energy, oil and gas and agricultural sectors.

The material is in demand in the following areas of the national economy:

Construction, architecture;
production of equipment and medical instruments;
pulp and paper production;
food industry;
transport engineering;
chemical industry;
electrical power and electronics;
production of household appliances and household items.

The decorative qualities of stainless metals and the high level of anti-corrosion properties make it possible to use parts and elements made from them for facades, advertising installations, shop windows, and fountains. Railings, doors, stairs, and elevators are made from alloyed material.

Application of heat-resistant steels

Alloy metals, resistant to high thermal loads, are used for the production of pipes, parts, components of machines, units, and industrial equipment. This list includes:

parts of thermal furnaces;
parts of conveyor belts for furnace conveyors;
heat treatment units;
fuel combustion chambers;
motors, gas turbines;
methane conversion devices;
furnace screens;
exhaust systems; heating elements.

Heat-resistant stainless metal is the best material for the production of parts and mechanisms that will be used in aggressive environments at elevated temperatures.

Sources

https://met-all.org/stal/marki-nerzhaveyushhej-stali.html
https://generalsteel.ru/marki-nerzhaveyushchih-stalej/
https://vt-metall.ru/articles/447-svojstva-nerzhaveyushhej-stali
https://martensit.ru/stal/nerzhaveyushhaya-stal/
https://tk-metal.ru/stal/marki-nerzhaveyushchei-stali-klassifikatsiya-rasshifrovka.html
https://solidiron.ru/steel/marki-nerzhaveyushhejj-stali-i-ikh-kharakteristiki.html
https://intehstroy-spb.ru/spravochnik/nerzhaveyuschaya-stal-marki-vidy-i-harakteristiki.html
https://prompriem.ru/stal/pishhevaya-stal-marki.html