Pipeline supports: classification and purpose

09/05/2019 Author: VT-METALL

Issues discussed in the material:

• Where are pipeline supports used?
• What types of supports for pipelines are there?
• What is the difference between fixed and sliding supports for pipelines?
• What standards and regulations are used in the manufacture of pipeline supports?

Pipeline supports are significant elements of the entire communications system. They take on the weight of the pipes, and then the entire load is distributed over the supporting structures or transferred directly to the soil. Thanks to the supports, it is possible to move the pipes in the longitudinal direction, fix them and protect them from premature abrasion. Today, manufacturers offer a wide selection of communications and corresponding supporting elements from various materials, all of them have their own technical characteristics - we’ll talk about this further.

Pipe supports: use cases

The main function of pipeline supports is to secure the communication in a certain position. They also prevent pipes from deforming under the influence of temperatures and vibrations. The fact is that vibrations often occur when transporting the working medium through the system.

It is extremely important to pay utmost attention to the installation process, since the reliability of communications depends on the supporting elements. If mistakes are made, they simply will not cope with the tasks assigned to them.

Let’s say right away that these products are used in a variety of fields and differ in type and purpose. So, installation of communications cannot be done without them:

• at enterprises;
• in housing and communal services;
• at nuclear power plants;
• at thermal power plants;
• in the gas and oil sectors.

If we are talking about a gas pipeline, then especially serious requirements are placed on the supports, including when the pipeline runs through regions that are unfavorable from a climatic point of view. It is equally important that the supporting structure protects the pipes from damage in the most vulnerable places, that is, at the fastening points.

The terminology of GOST 22130 defines supports as a structural element of the pipeline, that is, they cannot be called a transitional structure between pipes and foundations.

As we have already said, supporting elements are used when laying communications in a wide variety of industries. The necessary products are selected depending on their purpose in such a way that they allow the transmission of axial, transverse, vertical loads, torques to the soil or load-bearing structures.

Purpose of supports and scope of application

Pipe supports play an important role - they fix communications in the required position. They also prevent the product from deforming under the influence of temperatures. During transportation, vibrations occur in many pipelines. Another useful design function is vibration damping.

Supporting products affect the reliability of the entire product. It is because of this that it is very important to install these products correctly so that they do the job well.

Such structures are distinguished by purpose and type. The operational area of ​​these structures is quite wide. They are used to record the following communications:

• Oil and gas pipelines.
• Fittings for thermal power plants.
• Valves for nuclear power plants.
• Housing and communal services.
• Pipeline structures at different enterprises.

For a gas pipeline, the model must have high technical characteristics, especially when the pipe is laid in unfavorable climatic conditions. And the design for the gas pipe in the places where it is attached should prevent possible breakdowns of communications.

Purpose of pipeline supports

It is possible to achieve tightness and operational safety of the system only if two parameters are observed at once: the selection of high-quality pipes and the use of additional equipment, that is, supports for process pipelines.

VT-metall offers services:

According to the documentation, we are not talking about a separate construction part, but about a structural element of communication.

Let’s immediately name the useful functions of this component of the pipeline:

• Protection of the pipe from damage at the point of contact with the structure.
• Ensuring the pipes are positioned correctly.
• Load distribution along the entire length of the structure and its transfer to the ground.
• Elimination of vibrations, reduction of voltage in the system.

We recommend articles on metalworking

• Steel grades: classification and interpretation
• Aluminum grades and areas of their application
• Defects in metal products: causes and search methods

The popular name “suspensions” has been assigned to supports for fixing pipes, but this term is not suitable for every type of fastening.

The fact is that all supporting structures existing today are divided into types based on:

• immobility/mobility;
• installation method.

If we talk about the installation method, then similar products can be:

• hanging;
• ordinary.

Suspended models are attached to ceilings, slabs and other means. They are considered movable supports for the pipeline, that is, they can move in two directions: across or along the axis of the structure. Whereas the stationary ones have a different task - they rigidly secure the pipe in a certain position.

Why are movable models needed?

• They reduce the stress coefficient in the system walls.
• The support reaction force of the pipeline is transmitted to the supporting structure, without changing the position of the point at which the transmission occurs.

Welded supports for pipelines

Pipelines are the most important technological element of many production cycles. Their trouble-free operation depends on many factors. The key one is high-quality fastening of the pipeline to supports. The supports are subject to loads from both the weight of the pipes and the temperature difference. Based on the method of attachment to pipes, supports are divided into clamp and welded. The latter installation method gave the name to one of the popular and inexpensive types of supports - welded supports.

Types of pipeline supports

1. Hull supports.

To connect structural elements in space, a box-shaped housing is often used. It is made of sheet steel or welded from individual elements. Body supports are mounted on a beam, have stiffening ribs, and are supplemented with cushions, clamps and yokes.

When using the housing, the pipe rises by 100–200 mm, making it convenient to fasten and maintain during operation. If we compare the cost of a bent angle and a range of rolled metal products, then purchasing the former turns out to be more profitable and reduces the cost of the entire structure.

2. Frameless supports.

This is a traditional model, which is a sheet steel cradle bent in accordance with the outer shape and diameter of the pipeline. Most often this element is called a “pillow”. It can also be equipped with a round, strip or tape clamp and a support plate, which has holes for fixing.

The design is simple, its production requires a minimum amount of materials, and it itself consists of a very small number of parts. For this reason, the open-frame model is called the most affordable one used in pipeline construction. For such support elements there are markings T11, HB, OPB.

3. Tubular supports.

If we talk about the design of this element, then we have a vertically located pipe, welded to a plate with holes for installation. To increase the contact area of ​​the support pipe with the pipeline, a saddle-shaped cut is made at its upper end with a laser or cutter, which corresponds in shape to the main pipe.

When releasing such models, they are based on the OST 36-146-88 standard. This type is suitable for pipelines with a diameter in the range of 57–630 mm and medium temperatures up to +450 °C. There are currently four versions in total: A1, B1, A2, B2. Such products are marked TR; stainless steel, structural and carbon steel are used in their production.

4. T-bar supports.

T-bar elements can have different designs and are made of two types:

• Welded. In this case, a piece of the brand is installed on a single shelf, plates are welded at the ends, and a radius cut is made in their upper part in accordance with the diameter of the pipe for better fixation of the pipeline.
• Clamps. We are talking about strip or tape clamps that are welded on top of a piece of rolled metal, and holes for fastenings must be provided in its shelf.

These types of T-bar support structures are labeled as TP and TX. Various methods of connecting pipeline elements can be selected, thus achieving complete immobility of the unit or several degrees of freedom of the connection.

5. Clamp supports.

They occur when using both movable and fixed connection methods. Then the following types of fastening can be used:

• bar clamp;
• strip clamp;
• band clamp;
• flat clamp;
• rope clamp;
• mounting on the body;
• with frameless supporting structures;
• for welded and sliding supports for pipelines;
• the clamp is used as a guiding element.

The clamp tightly grips the pipe on all sides; gaskets made of dielectric and antifriction materials can be used with it. Also, with this fastening method, one degree of mobility of the pipeline along its axis can be achieved.

The classic model is an inverted U-shaped structure with or without stiffeners.

Clamp elements are used for pipelines with a diameter of 57–377 mm, while the yoke type is suitable for sizes 377–1420 mm. It is worth noting that assembly units can be marked differently, this is due to the fact that several standards are used in their production.

6. Welded supports.

Sliding and movable support structures are rigidly attached only to the base/stands or directly to the base and pipe. Welded support structures come in the following modifications:

• sliding guide;
• sliding motionless;
• steel;
• motionless;
• sliding;
• corner;
• on a beam with eyes.

For their production, they take rolled and bent angles, T-bars, channels, pipes or curved, welded bodies.

7. Supports for vertical pipelines.

According to OST 36-17-85, supports for technological vertical pipelines and piping of technological lines are manufactured. Most often we are talking about a strip, rod or yoke clamp, which is attached to a corner or in a bent body.

In the documentation, such structures are usually referred to as VP; usually these are fixed models. In this case, the main characteristics are considered to be material, diameter, face-to-face length, temperature and pressure of the working medium.

8. Rope supports.

A yoke is nothing more than a type of clamp, supplemented with special fasteners or studs. Yoke models are divided into types according to the design of the assembly unit and are:

• tubular;
• strip;
• case;
• stamped;
• stamped and welded.

This element is installed in this way: the pipe is laid on a cushion or cradle with holes for the studs, after which the yoke is pulled on top of the threaded connections. To make it easier to clamp the pipe, special mechanisms, claws, traverses, clamps or beams can be used.

9. Roller supports.

The design of this model stands out from the general background due to the following characteristics:

• two or more support platforms are provided;
• installation is carried out between the bearing supports;
• axial displacement of the pipeline by a specified amount is allowed;
• It is allowed to move the pipes sideways by 50 mm.

It is possible to produce one- and two-level elements, with one roller and several blocks, and the enterprises also produce clips for pipelines of energy facilities, steel and spring models. Rolling elements can significantly reduce the level of friction, and hence the wear rate of the elements of the entire structure. As a result, the service life increases, and assembly units are easier to repair.

10. Side supports.

The design of this element includes a plate and a support, which is necessarily equipped with several stiffening ribs for reinforcement. This model differs from the welded one only in its location in space, because it is mounted on a vertical surface, due to which it compensates for lateral loads, but does not perceive vertical forces.

Such elements are marked as T10 and are suitable for pipes with a diameter of 194–1,420 mm.

11. Frontal supports.

If we consider the location of the frontal models relative to the flow of the working medium and the body of the pipes, then they are installed in a transverse projection. These products are usually divided into types based on the material of manufacture and design:

• panel panels are made of reinforced concrete, often having several stiffening ribs;
• thrust ones are a pair of stops in a vertical or horizontal plane on both sides of the pipeline; they can also be four stops on all sides.

Double-supported frontal elements are installed when it comes to small axial loads, while four-supported ones are necessary for serious loads. If necessary, the entire structure can be reinforced with half rings and stiffeners.

12. Fixed supports.

This type of structure is necessary if it is necessary to exclude any mobility of communications relative to supports and foundations. Manufacturers offer the following design options designed for different operating conditions:

• "dead";
• for pipes in thermal insulation PPU;
• frontal and side thrust;
• yokes and clamps;
• hulled and unhulled;
• for vertical boxes;
• persistent reinforced;
• panel reinforced concrete;
• welded and steel.

To designate these pipeline elements, the abbreviation NOP is used. This type is suitable for installation with pipes with a diameter of 32–1,420 mm and is intended for conditions with increased operating loads.

13. Movable supports.

If it is necessary to achieve one or more degrees of mobility of the pipeline relative to the foundation or supporting structure, various movable models are used:

• clamp OPC;
• welded OPP;
• unframed OPB.

The rules for the manufacture of such supports for pipelines are established by GOST 14911-82, OST 36-94-83 and 36-146-88, in addition, the specifications of individual enterprises, drawing albums T-MM-26-05, and other documentation are taken into account.

14. Sliding supports.

This type of moving elements provides one degree of freedom in the axial direction. In this case, the following execution options exist:

• steel and welded;
• underlay and in a case for pipes in PPU thermal insulation;
• for pipelines of thermal and nuclear power plants;
• with flat clamp and bracket;
• sliding fixed and guides of several types;
• dielectric and yoke;
• clamp and frameless.

To resist rapid wear of pipes and system elements, anti-friction gaskets, rollers and blocks are used.

15. Adjustable feet.

They are chosen if precise vertical positioning of individual sections of the pipeline is necessary. Let us say right away that such structural elements necessarily have movable wedge stops. Assembly units are marked OR, and in their manufacture the standard TU 5263-003-93646692 is used. Another important element of such a supporting structure is the support. It is raised and lowered by moving the wedge stops, which are attached to the plate by bolted connections.

16. Dielectric supports.

Such elements are necessary to protect the pipeline from stray and induced currents. To do this, use a gasket made of any dielectric material, for example, paronite, which has anti-friction properties.

17. Supports for reinforcement.

OST 36-17-85 establishes standards for the production of structures for the installation of OKA pipeline fittings. From a technical point of view, these are four stiffeners that are cross-welded together and mounted on a support plate. In their upper part, the stiffeners follow the outer contour of the installed pipeline fittings.

18. Unloading supports.

This design is necessary to compensate for water hammer, vibration and mechanical loads that cannot be avoided during the operation of pumping and compressor equipment. Such an element consists of a pipe and has several degrees of freedom relative to the foundation. In its production, they rely on SNiP 3.05.05-84, and GPA markings are used.

Varieties for pipelines

Today there are several types of pipe supports, differing in their design purpose and design.

Open-frame models

They perform the same function as a clamp. They are divided into two groups:

• Stationary, unframed products.
• Movable products, unframed.

It should also be noted that the concepts of “sliding support” and “moving unframed product” are incomparable. Movable rigid devices must be mounted without rigidly tightening the clamp. This will allow communication to move in a longitudinal plane and feel free. Such models also have a name such as “clamp guides”. Fixed models are mounted very simply: they are tightly tightened to the base. This eliminates movement of the pipeline structure.

Welded housing

These structures are mainly used for fastening steel communications. They are attached by welding. From a production point of view, they are considered the most convenient, and they also have a fairly affordable price. They are also divided into stationary and mobile. In some regulatory documents, a body welded movable support is regulated as a sliding one. The design of welded body products can be varied.

Housing clamps

These structures are conventionally divided into two groups:

• With a flat clamp (made from a metal strip).
• With a round clamp (the material for the clamp is a metal rod).

They can also be stationary and mobile (sliding). Products with a flat clamp are used when installing steel communications, but they can also be used for pre-insulated pipeline structures. But models with a round clamp are used only when fastening steel pipelines. A type of such support is considered to be a yoke support, which is distinguished by the presence of stiffening ribs. They are necessary to strengthen the product.

Designs for drainage

They are specially mounted under the bend of communications, or rather, under the outlet. There are the following types of designs for bends:

• Welded bends.
• For ground-type branches.

From an operational point of view, such models are divided into fixed and mobile. They are also used for fixation when installing various fittings.

Supports for fastening vertical pipelines and panel boards

Supports for fastening vertical pipelines are used to secure vertical sections of the structure. They are “paws” in design, which are fixed to the pipe by welding. Such models rest on floor slabs or beams.

The panel supports look exactly the same as the previous ones. They are used when it is necessary to run a pipe through a wall. As a rule, they are motionless.

How does a fixed support for pipelines work?

Fixed structures are necessary in cases where rigid fastening of the system is required. In this way, it is possible to prevent its shifts in any of the possible directions.

Fixed elements are used in the installation of pipelines, which are installed in the following ways:

• external;
• internal (underground).

During the installation of sections of the system, the supporting structures are fixed using reinforced concrete frames. You need to understand that the latter are located at different distances from each other, dividing communications into segments. The length of the segment is related to the characteristics of the special compensators installed on it.

During both external and underground installation of communications, fixed elements are actively used. If a channelless method is used for laying underground, choose supports with high-quality waterproofing. Usually the role of the latter is played by a polyethylene shell. When it comes to external installation, galvanized waterproofing is preferred.

For a fixed installation method, the following elements are used:

• steel pipe;
• steel sheet obtained by hot rolling;
• polyurethane foam (PPU);
• heat-resistant tape;
• galvanized shell;
• centralizer;
• polyethylene shell.

For the manufacture of fixed steel supports for pipelines, the most durable and reliable grades of this metal are used.

The steel sheets used in this case can be of three types - it all depends on the quality:

• ordinary;
• low alloy;
• structural (considered the highest quality).

A centralizer is an element that simplifies the alignment of pipe ends before connecting pipeline elements. Today there are two types of centralizers:

• external;
• internal.

In accordance with the name, external ones perform alignment from the outside of the pipe and can be:

• link;
• eccentric;
• hydraulic jacks.

The first ones are necessary for centering pipes with a cross-section in the range of 57–2,224 mm. Unlike other models, they have increased resistance to low temperatures, since they are made from frost-resistant steel. Eccentric centralizers can be used when working with pipes of any cross-section. The latter type is used exclusively when aligning pipes with very large weights or when there are deformations on them. Such devices provide a force of 12 tons.

If we talk about internal centralizers, they are distinguished by one important feature: they allow long-term welding of pipes from the inside. As a result, the quality of seams is significantly improved. However, these products also have disadvantages, the main one of which is their heavy weight, that is, their transportation is impossible without special equipment.

Fixed support structures for pipelines are used in construction:

• main gas or oil pipelines;
• various types of communications at enterprises;
• pipelines to nuclear power plants and thermal power plants.

In addition, it is the fixed elements that are used in the construction of communications in regions with low temperatures, thus increasing the service life of the entire structure.

These elements are installed in systems used in completely different areas. They divide the entire system into separate segments in which bellows-type compensators are installed. The latter are designed to protect the pipeline from deformation that is possible when the ambient temperature drops.

Fixed supports of steel process pipelines are welded to platforms and mounted to the pipe using fasteners. To achieve the greatest reliability, metal plates are also welded close to the ends of the clamp.

Materials for production

Basically, supports for pipelines are made of metal . This is due to the fact that they must have excellent resistance to high pressure and good strength characteristics. Fastening the pipeline to supports is a responsible undertaking. It requires special construction knowledge and skills, as well as experience. If fastened incorrectly, an emergency situation may occur. And all because there is a lot of pressure on the supports.

Steel is mainly used to make supports for pipelines. It is excellent for these purposes, as it has a high strength coefficient. But other metals can also be used to make such structures. Typically these are copper, brass, titanium and aluminum.

Supports made of these metals are used for a variety of specialized and household purposes. It should also be noted that pipe supports are highly resistant to the harmful effects of corrosion. It is because of this that during their manufacture various protective compounds are applied to their surface.

A variety of enamels and paints are used as anti-corrosion materials, and the surface of the product can also be galvanized. Steel that has gone through the galvanizing process is highly resistant to corrosion. In addition to the protective function, the application of various compounds gives the product a presentable appearance.

In addition, supports can be made from a variety of modern polymer materials and used for installation indoors of utility lines. The most common polymer for these purposes is polypropylene. Polypropylene support has the following advantages:

• Speeds up construction construction.
• Lightens the overall design due to its low weight.
• Welding equipment is not required for installation of this structure.
• Compared to metal structures, it has a low cost.

Propylene properties make it possible to use it when fastening pipelines. Supports for household polypropylene pipes perform an insulating function; it is for this reason that they are not afraid of electrical influences.

And don’t forget about such a material as concrete. It is used for the manufacture of support rings and their foundation part. It is worth noting that the manufacture of supports is regulated by state quality standards. It is because of this that even a small deviation from the norm is fraught with low-quality products.

What are the benefits of sliding supports for pipelines?

Sliding models are necessary if communications pass along the surface of the earth. This ensures free movement of the pipeline in horizontal and vertical planes. Also, such devices protect the entire structure from premature abrasion.

It is impossible to do without sliding elements when installing systems that experience loads during seasonal temperature changes, because at this time the pipes expand and contract in two planes at once.

Thanks to sliding models, it is possible to achieve stability of communications and balance their movement in space that occurs when temperatures change.

The sliding model includes the following components:

• the base, the role of which is often played by a corner;
• semicircular metal pipe holder;
• pad;
• fasteners, that is, nuts and bolts.

Movable models are available in three types:

• hard;
• elastic;
• constant force designs.

Rigid models, in turn, are:

• guides;
• rigid suspensions;
• sliding supports.

The former do not allow communication to move downwards and horizontally. Suspensions of the second type allow you to achieve the greatest mobility of the entire structure. While the latter type eliminates the pipe moving down in the vertical direction. Elastic supports can boast such rigidity only if the pipe moves vertically. Then the following pattern works: the higher the load on the supporting element, the further the pipe moves. Note that the constant force support copes with any load, regardless of the displacement of the communication.

To protect this element of the system from rust, it is primed in several layers. Or it can be coated with primer enamel. But the highest degree of corrosion protection is provided by powder coating or galvanizing.

Typically, durable carbon steel is chosen as the material for the manufacture of such products. But it has to be replaced with low-alloy grades when it becomes known that the pipeline will be operated under conditions of large temperature fluctuations.

When classifying sliding supports for pipelines, it is not the price that is taken into account, but their design, therefore the following types are distinguished:

• on brackets (fastening elements);
• clamp;
• ball;
• dielectric;
• roller (roller).

Due to the rollers used in it, the roller design reduces the friction force between its base and the upper part. Note that friction is generated when the pipeline moves.

Dielectric sliding elements are chosen for pipes in the manufacture of which the following are used:

• carbon steel;
• low carbon steel.

Such structures require insulation from a special material - sheet paronite, which includes:

• rubber;
• asbestos;
• additional powder additives.

For the manufacture of ball sliding elements, steel is used, and they are considered a specific fastener. The fact is that with their help the pipe can move in two directions at once: longitudinal and transverse. Therefore, such models are most often installed at power plants and heating mains.

Typically, sliding type devices are isolated from metal casings using waterproofing. And the inner surface of the pipe and the waterproofing material are lubricated with a special graphite lubricant, which prevents friction. Next, weld the clamps and tighten them securely. It is important that when installing such structures you can do without special equipment, due to which the whole work takes much less time.

Sliding supports, production and delivery throughout Russia

Our pipeline support plant is ready to offer customers supports for various types of pipes. We not only manufacture pipeline supports, but also ensure their delivery, which is carried out both in St. Petersburg and throughout Russia. Purchasing pipeline supports from our company has many advantages:

• We produce supports for pipes of all types, which allows you to choose a solution for any engineering system. We offer supports for high-pressure pipelines, as well as supports for pipes made of steel, PVC, cast iron and other materials. All types of pipeline supports that our company produces are presented on the pages of the site. You can find out the cost of the type of pipeline support you are interested in yourself by studying our price list.
• Pipeline supports comply with GOST and all technical standards in force in the Russian Federation. Metal products from the PZM pipeline support plant are successfully sold and operated throughout the country, proving their reliability and impeccable quality. We are aimed at long-term cooperation, therefore we strive to achieve complete mutual understanding with the customer on all issues.
• Our company produces not only standard designs, but also offers the production of movable supports with specified technical parameters and functionality. The design of pipe supports is carried out by experienced engineers in strict accordance with current regulations. This allows us to solve problems of any complexity related to the construction and repair of pipeline networks of various types and purposes.
• Unlike many other manufacturers of pipeline supports, our company does not set any restrictions when creating an application. Pipe supports are sold in any volume you are interested in. We offer individual terms of cooperation to each client who wants to buy movable pipeline supports or any other products, which makes our partnership truly profitable. Our company’s regular business partners include many well-known enterprises and organizations of the Russian Federation interested in purchasing high-quality and inexpensive metal structures.
• We produce not only metal supports for pipelines, but also other components for the installation of engineering systems, which saves you time and effort in finding the right parts.
• Thanks to the availability of modern industrial equipment, the production of pipeline supports is carried out in a short time, so even a large order will be completed promptly and without delays.
• The cost of pipeline support and other types of products we offer is very favorable, which allows us to reduce the overall costs of implementing a pipeline system construction project. In this regard, our products successfully compete with the products of other manufacturers of pipeline supports in St. Petersburg and other regions of the country.
• To purchase pipeline supports or any other products from PZM ST N3, simply send us your online application indicating the technical requirements or contact us using our toll-free phone number. If you need additional information, our specialists will advise you on the choice of metal supports for pipelines of any type and purpose. On the pages of our website you will find a lot of information about the design features of pipeline supports, the requirements for these products, installation and operation of products, etc.

Sliding support for pipes: design properties and purpose

As you know, there are 2 main types of pipeline supports: movable and fixed. The designs of pipeline supports and the method of their installation differ depending on the type of product. For example, a movable support provides the possibility of displacement of elements of the pipeline system caused by external factors and the influence of the working environment. A characteristic feature of the installation of a movable support is the absence of a rigid attachment to the pipe. Pipeline guide supports include special skids that allow the pipes to move in a horizontal plane to compensate for horizontal axial stresses and avoid deformation. The use of sliding supports is most relevant in networks characterized by frequent changes in the temperature of the working environment, since this makes it possible to avoid vertical displacement, but does not limit the thermal expansion and contraction of pipes.

The design of the sliding supports includes a base made of a channel or angle, metal pipe holders, fasteners, as well as special gaskets that protect the pipe body from rubbing. In general, sliding supports can be divided into 3 main groups: independently sliding, supports on brackets and supports on an overpass.

The price of a sliding support is primarily determined by the type of design and material used to make the product. Various grades of steel are used to make sliding supports for pipelines. The choice of steel grade for the production of movable pipeline supports must be made taking into account the pipe material and operating conditions. When it comes to steel pipeline systems, the grade of steel for pipes and supports must be the same.

Distance between pipeline supports

However, it is not enough to know the types of supports for pipelines and buy all the necessary elements. For competent construction, you need to clearly understand the distance between these structures, because only in this case the system will work properly. The distance is set in accordance with the requirements specified in the relevant documentation, as well as on the basis of information about the scope of operation of the pipeline, its weight, and possible deflection during service.

The values ​​are calculated based on data from the table “Design of Heat Networks” by A. A. Nikolaev. So, for horizontal placement, the table suggests the following calculation: with a minimum pipe diameter of 20 mm and a maximum working environment temperature of +60 ˚C, the supports should be 60 cm apart from each other. The rule works here: the larger the pipe diameter, the larger the pitch used.

The same calculation principle is used if vertical placement is planned. Let’s say the main line has a diameter of 40 mm and a temperature of +20 ˚С, then the length of one segment is 138 cm. If the network temperature reaches +70 ˚С, then the length of the segment is reduced to 113 cm.

When arranging fixed metal supports, the schematic characteristics of thermal communications are taken into account. Typically, such structures are installed near main branches, shut-off valves and in straight sections, taking into account the properties of the expansion joints installed there.

The distance between the fixed elements of the system is calculated as follows:

L = 0.9 × ∆L / (a ​​× (t-tpo)), where

• ∆L – compensator capacity, in mm (values ​​are taken from the table);
• a – coefficient of linear expansion of steel walls during temperature fluctuations, in mm/m˚С;
• L – length of the pipeline section for which the calculation is being made, in m;
• t – calculation of the temperature of the working environment during installation, in ˚С;
• tрo – ambient temperature;
• 0.9 – error value (equal to 10%).

To calculate the distance between the sliding fasteners, it is necessary to understand the scope of use of the entire system. The fact is that, for example, for a cold pipeline this step will be greater than for communications through which hot water flows.

Pipe hangers

Pipeline hangers are one of the means of fastening pipelines, an element of their design, on the strength and quality of which its overall reliability depends.

Pipeline hangers are secured between building floors and supporting structures using welded eyes, bolts and rods. The rod length is determined according to the requirements and is regulated in the project. It can range from 150 to 2000 mm (the interval between sizes is 500 mm). All types of pipeline hangers are standardized.

Pipeline supports: norms and standards

At the moment, standards have been developed at the state level for two categories of such products:

• GOST 14911-82 “Parts of steel pipelines. The supports are movable. Types and main sizes." It applies to movable structures made of steel grades OPB (frameless), OPH (clamp), OPP (movable welded);
• GOST 16127-78 “Parts of steel pipelines. Pendants. Types and main sizes." It applies to pendants designated PM, PG, PMV, PGV.

If we talk about industry standards for assembly units for fastening gas pipeline pipes, then in Moscow there are 2.5 times more of them:

• OST 108.275.24 – pipelines of nuclear power plants and thermal power plants;
• OST 24.125.154 – pipelines for nuclear power plants and thermal power plants made of high-alloy and special steels;
• OST 36-94 – moving elements of technological lines;
• OST 36-104 – steel structures for systems working with media characterized by low temperatures;
• OST 36-146 – series KN, VP, TO, KhB, UP, ShP, TP, KH, KP, TX, TP for diameters 57 – 1420 mm.

There are also three subordinate TU standards relative to GOST. They are used in the production of the models we describe:

• TU 1468-012-04698606 – moving elements of process piping, used at a pressure of 10 MPa, temperatures from -70 °C to +450 °C, pipe diameters of 18–1620 mm;
• TU 1468-002-92040088 – suspension, supports and block modules for pipelines 32 MPa, DN 15–1600 mm;
• TU 1468-001-00151756 – sliding elements for diameters 100–1400 mm, temperatures from -70 °C, pressure 10 MPa.

There are also two series of assembly units of this type:

• 903-10: 4th edition - for structures mounted motionlessly, 5th edition - for movable modifications, 6th edition - for suspensions;
• 903-13: issue 6-95 – pendants, issue 7-95 – fixed elements, issue 8-95 – movable.

The album of drawings T-MM-26-05 includes options for the design of movable and dead structures of PS, ONS and OSS. In the documentation NTS 65-06 you can find working drawings and technical regulations intended for the manufacture of software and non-productive software.

Documentation

Chapter 11. PIPELINE INSTALLATION TECHNOLOGY

Installation of pipelines should be carried out in accordance with the project, detail drawings (CDD), work execution plan (WPR) and safety regulations. Pipeline installation is carried out mainly with ready-made units manufactured in pipe procurement shops complete with fittings, as well as pipeline blocks assembled on site, with maximum mechanization of installation work. Installation of pipelines “in situ” from individual pipes and parts is allowed only in exceptional cases.

§ 1. PREPARATORY WORK

Before starting work on pipeline installation, the foreman of fitters studies working drawings, specifications, PPR and other technical documentation for the facility being prepared for installation. Having received an installation task, workers must familiarize themselves in detail with the technical documentation and safety regulations. At the same time, they study the pipeline laying diagram, plans and dimensions of the building, drawings of piping of apparatus and equipment, fastening of pipelines and supporting structures, specifications for products and fittings.

Before installation of pipelines begins, the following preparatory work must be completed:

Compliance with the design for the installation of support structures for pipelines, installation of embedded parts for fastening pipelines, the presence of holes for pipelines in building structures, fastening of fixed supports of free-standing support structures and overpasses were checked. Installation and sealing of embedded structures and holes for pipelines are provided for in the construction part of the project and must be carried out by the construction organization.

buildings, building structures, overpasses, trays, trenches are accepted according to an act from construction organizations with verification of their construction readiness for the installation of pipelines and compliance with the design marks to which the pipelines are attached in the installation drawings. When accepting trenches, the compliance of their dimensions and elevations with the design ones, the correctness of the slopes, compliance with the slopes, the quality of the bed and the condition of the fastenings must be checked. The bases of trenches in rocky soils must be leveled with a layer of sand or gravel at least 20 cm thick;

Compliance with the drawings of the types, sizes and locations of fittings of the equipment to which the pipelines are connected, and the accuracy of its installation in the axes and marks were checked. All deviations from the project must be recorded in the work log;

Sites for intermediate storage and consolidation of pipeline units have been organized. Intermediate storage of pipes, parts and assemblies is carried out in open areas along each line separately and they are located so that free passage and access to them is ensured for inspection, checking markings and performing loading and unloading operations. When stored in an open area or in rooms without a wooden floor, all assembly blanks, regardless of the nature of their installation, are laid on wooden pads with a height of at least 200 mm so that it is possible to strap them when submitting for installation. It is recommended to deliver finished pipeline assemblies to sites in containers, which creates convenience during storage, on-site movement and loading and unloading operations. It is recommended to place signs near the storage areas of workpieces indicating the unit number and line number for the project;

prepared workplaces, tools, installation devices; equipment for welding stations; the necessary scaffolding recommended by the PPR has been installed;

units, sections, pipes, fittings, compensators, stops, hangers and other products are accepted for installation; their completeness, compliance with the project requirements and delivery conditions were checked. Industrial installation methods predetermine that components, supporting structures, supports and hangers are delivered to the installation site from pipe procurement shops with the maximum degree of factory readiness and completeness. The completeness of the delivery is checked according to specifications, packing lists and other shipping documents, and the condition is checked by external inspection. When loading, it is not allowed to dump pipe blanks and store them in bulk.

Before the installation of pipelines for sanitary systems begins, it is necessary to check the completion of general construction work in buildings and structures, including accepting holes and grooves for installation for laying pipelines in compliance with the dimensions given in the table. 61.

When constructing external water supply, sewerage, gas pipelines and others, before digging trenches and pits, all underground communications must be opened. Communications are opened using shovels, without the use of percussion tools. The autopsy areas are fenced off and these areas are illuminated at night. Existing communications that cross the pipeline being laid or are located parallel to it at a distance that is unacceptable according to the standards are shifted in accordance with the project. Before proceeding with the installation of external pipelines, the route passing

Table 61. Dimensions of holes and grooves for laying pipelines of sanitary-technical systems, mm

Heating

through a populated area, along its entire length should be fenced on both sides with inventory boards with the installation of warning signs. In areas of heavy traffic and pedestrian traffic, red flags should be installed on the fence.

The laying of pipelines must be preceded by a breakdown of their routes, which is carried out in accordance with the project, where the connections of the pipeline axes to the floors, walls and columns must be indicated. The axes and marks of the pipelines are transferred to the installation site and the installation locations of supports, fasteners, compensators and fittings are marked.

When laying out the route of intra-shop pipelines, the axes and marks are fixed with the help of signs applied directly to the walls of the building, metal and reinforced concrete structures with a scriber or oil paint. The breakdown of straight horizontal axes is carried out first of all; this is done using a steel string with a thickness of 0.2-0.5 mm or a nylon thread, along which the axes of the pipelines are marked on the structures, indicating vertical marks (taking into account the required slope of the pipeline). The heights of the horizontal axes of pipelines are found by measuring from the level of the finished floor with a plumb line and a steel tape measure. If it is impossible to measure from the floor or ceiling, marks from existing benchmarks (elevation marks established by construction organizations) are transferred to the pillars and columns of buildings along the route of the future pipeline every 10 m using a level. From the transferred mark, measure the distance to the pipeline axis, which is determined by subtracting the benchmark mark from the design distance to the pipe axis. A square is applied to the pipeline axis mark transferred on the column and a horizontal line is drawn with bright paint. The resulting mark is transferred to the next column. If the pipeline will be laid with a slope, then the mark is transferred to the next column, taking into account the direction and slope indicated in the project. Typically, all process pipelines are laid with a slope towards their possible complete emptying of residual liquid by gravity.

The minimum slope values ​​for process pipelines for various purposes, m, per 1 m length are as follows:

Gas pipelines and pipelines (in the direction

First, the route of the main line is broken down, and then the axes of the branches to devices, machines, fittings or to other lines. Along these axes, the installation locations of compensators, fittings, movable and fixed supports, pendants, and brackets are marked.

When laying non-insulated pipelines in channels, on high and low supports and overpasses, the distance between the walls of the pipes in the clear is taken taking into account the location of the flanges staggered, mm not less: for pipes with ?>„, respectively 57...108-80; 108…377—100; more than 377-150.

The laying of pipelines inside buildings and installations is carried out on supports along walls and columns, on suspensions to floor beams and ceilings, taking into account the free movement of lifting and transport equipment. The distance from the floor to the bottom of the pipes or the surface of their thermal insulation must be at least 2.2 m.

The distance between the outermost pipeline or the surface of its thermal insulation and the wall must provide the possibility of free thermal expansion, inspection and repair of the pipeline and fittings and is taken in the light to be at least 100 mm. Pipelines laid along the walls of buildings should not cross window and door openings. When laid along the external walls of buildings, pipelines are located at least 0.5 m above or below window openings.

Upon completion of work on laying out the pipeline route, a report is drawn up, to which a list of axes and turns is attached.

§ 3. INSTALLATION OF SUPPORTS AND SUSPENSIONS

Supports and hangers are used to fasten horizontal and vertical pipeline lines to buildings, structures and technological equipment. Based on their purpose and design, supports are divided into fixed and movable.

Fixed supports rigidly hold the pipe and prevent it from moving relative to the supports and supporting structures. Such supports absorb vertical loads from the mass of pipelines with the product and horizontal loads from temperature deformation of pipelines, water hammer, vibration, etc. Depending on the method of attachment to the pipe, fixed supports are welded and clamped. In clamp supports, special stops are welded to the pipe to prevent the pipe from slipping in the support. Fixed supports are manufactured according to the standards of design organizations and manufacturing plants.

Movable supports support the pipeline, but do not prevent it from moving due to temperature deformations. They only support vertical loads from the mass of the pipeline with the product. They are divided into sliding, roller, frameless and others. Movable supports are manufactured in accordance with GOST 14911-82* and GOST 14097-77, OST 36-11-75, as well as according to the standards of design organizations and manufacturing plants.

Suspensions are attached to supporting structures and building floors using rods with bolts or welded eyes. The length of the rods is set by design and adjusted with nuts or couplings. Pendants are manufactured in accordance with GOST 16127-78, OST 36-12-75.

Installation of supporting structures, supports and hangers is carried out after the pipeline route has been laid out, when the axes have been marked and the mounting locations for fittings and compensators have been determined. Supporting structures are most often attached to reinforced concrete elements of buildings - columns, crossbars, panels, welding them to embedded parts.

After the supporting structures are secured, supports and hangers are usually installed in the design position along with the pipeline assemblies and blocks. If it is necessary to pre-fix the installed pipelines on temporary supports and hangers (in the case of installation of pipelines of a complex configuration in cramped conditions, etc.), the latter must correspond in strength to the weight of the pipeline fixed to them and be installed on durable structures. After installation of all pipeline components and welding of installation joints, permanent supports and hangers must be placed, and temporary ones must be removed.

When installing supports and support structures under pipelines in accordance with SNiP 3.05.05-84, the deviation of their position from the design plan should not exceed ±5 mm for pipelines laid indoors and ±10 mm for external pipelines, and the slope should not exceed +0.001 , unless other tolerances are specifically provided for by the project. To level the elevations and ensure the design slope of the pipelines, it is allowed to install steel spacers under the soles of the supports and weld them to the embedded parts or supporting structures.

The length of the suspension rods is changed due to the threads on them.

Welded joints of pipelines must be at a distance of no less than 50 mm from the supports, and in steam and hot water pipelines controlled by the USSR State Technical Supervision Authority - no less than 200 mm. It is recommended that flange connections of pipelines be located, whenever possible, directly at the supports.

Fixed supports are welded to the supporting structures and securely fixed to the pipe using clamps with locknuts installed on the bolts. The support pad and clamp are pressed tightly against the pipe. To prevent the pipe from moving in a fixed support, thrust plates are welded to the pipe, which should rest against the ends of the clamps. The stops are installed so that the gap between the clamp is no more than 1.5 mm. The surface of the stops and the surface of the pipe at the installation sites must be cleaned with a hand grinder before welding. Thin aluminum spacers are installed between the alloy steel pipe and the carbon steel support or clamp to protect the contact points from electrochemical corrosion.

Movable supports and their parts should be installed taking into account the thermal change in the length of each section of the pipeline, for which purpose the supports and their parts must be shifted from the axis of the supporting surface in the direction opposite to the pipeline extension. The displacement value is usually taken according to the design to be equal from the base to the full thermal elongation of a given section of the pipeline. The suspension rods of pipelines with thermal elongation must be installed with an inclination to the side. The amount of displacement and the direction of preliminary tilt of the rods are indicated in the project.

§ 4. INSTALLATION OF PIPELINES

With industrial methods of work, installation of tr^. pipelines are carried out in units, sections and blocks. Nowadays, installation by aggregated blocks has become widespread, i.e., pipeline blocks are assembled together with technological equipment and installed on a common frame.

The enlarged assembly of the blocks is carried out on stands and racks located in the operating area of ​​the assembly cranes. Here it is advisable to use stands 21338 (see Fig. 10) and centralizers (Fig. 46). Before assembling the blocks, temporary plugs are removed from the fittings and assemblies and the flanges and pipe ends are unpreserved. After control measurements of finished units and checking the location of fittings on the equipment, the assembly of blocks begins. The dimensions and weight of the blocks should ensure ease of transportation to the installation site and installation in the design position. Knots and blocks must remain strong when lifted, otherwise they may become deformed. If necessary, temporary structures must be installed to provide the required rigidity.

Rice. 46. ​​Pipe welding centralizer TsT-426:

1
- screw; 2 - nut; 3 — cheek; 4 - link; 5 - roller; 6 — straightening
points

It is recommended to begin installation of pipelines with equipment piping, i.e., first of all, install units and blocks that include fittings, as well as basic units with fittings for the main main sections of pipelines.

Straight sections are laid after installation and fastening of adjacent units and blocks. It is advisable to attach supports and hangers to the units and blocks being lifted; this facilitates subsequent alignment. When installed in the design position, units and blocks, as well as sections and individual pipes must be laid on at least two supports and securely fastened. Temporary fastening of pipelines during the installation period is permitted in exceptional cases. Pipelines laid through walls, ceilings or other elements of buildings must be enclosed in sleeves in accordance with the design instructions. In the absence of instructions, it is recommended to use pipe sections with an internal diameter 10-20 mm larger than the outer diameter of the pipeline section enclosed as sleeves. The ducts should protrude 50-100 mm on both sides of the building element crossed by the pipeline. Sections of pipelines in sleeves should not have joints. The gap between the pipeline and the sleeve is filled on both sides with asbestos or other non-combustible materials that allow the pipeline to move in the sleeve.

Lifting and installation of units and blocks into the design position is carried out using cranes, rigging equipment and devices provided for by the PPR. Hoists, blocks and other rigging equipment used in the installation of pipelines are allowed to be attached to components of building structures that have the necessary safety margin. If there are no relevant instructions in the PPR, the possibility of fastening to building structures must be agreed upon with the design organization.

Pipeline fittings are usually installed complete with units or blocks. When installing fittings that are not included in units or blocks, it is first secured to supports, after which a pipeline is connected to it.

It is advisable to install external above-ground pipelines in enlarged blocks and sections. The dimensions and designs of blocks or sections are determined in the PPR and depend on the designs of overpasses, the number and location of pipelines on overpasses, their diameters, the availability of lifting mechanisms at the installation organization, as well as installation conditions. The enlarged assembly of blocks and sections is carried out on stationary or mobile lines. Sections are lifted onto supports or trestles usually using two cranes, the types of which must be specified in the PPR.

Installation of underground pipelines is carried out in the following sequence: trenches are developed; clean the bottom and walls of the trenches; dig pits in places of welding and insulation of joints; arrange the foundation for the pipeline; make the bottoms of wells and chambers; lower the pipes into the trenches, laying them on the base; closing joints are assembled and welded; install connecting parts and fittings, tamp and sprinkle the pipeline with soil (except for joints); blow the pipeline with air; preliminary test the pipeline for strength; isolate joints; filling up the pipeline. The final testing of the pipeline is carried out after completion of construction and installation work.

To center the ends of pipes assembled for welding and eliminate discrepancies between the edges along the perimeter of the pipes, centralizers are used. The pipe welding centralizer TsT-426 is a ball-and-link plate chain assembled from links mounted on freely rotating rollers with threaded holes into which retaining screws are screwed. The right extreme link is made in the form of two plate hooks that close the centralizer on the axles of a nut having a right-hand thread. To tighten the centralizer in joined pipes, use a screw located parallel to the tangent to the circumference of the pipe. The screw has right and left thrust threads. It is recommended to rotate the screw using a ratchet wrench with adjustable torque with a replaceable head with a 14 mm opening.

To center the pipes during their assembly, it is necessary to lay the centralizer so that both rows of plates are located symmetrically to the joint of the pipes, then the hooks are put on the trunnions of the right nut and by rotating the screw, the centralizer is pulled until the axes of the pipes being joined are aligned. Where it is necessary to eliminate the displacement of the edges, the retainer screws are screwed into the threaded holes of the rollers. In this case, the torque should not exceed 30 Nm.

When changing the diameter of the assembled pipes, the number of centralizer links is changed.

Technical characteristics of centralizer TsT-426

Outer diameter of joined pipes,

mm……….219—426

Maximum tightening torque, Nm:

Manufacturer…….Poltava experienced

foundry-mechanical plant Minmontazh-

special construction of the Ukrainian SSR

It is recommended to install pipelines laid in trenches in sections and strands up to 1000 m long. In this case, ready-made coded pipes or sections 24-36 mm long are laid out at the edge of the trench and assembled

and
weld their joints in a fixed position. The lashes are assembled on plank beams or on excavated soil for the convenience of their subsequent slinging when laying in a trench. A distance of up to 35 m should be provided between the sunbeds, and the bottom of the trench should be planned taking into account the design slope. In order not to damage the insulation, the pipeline is lifted using special slinging devices - towels consisting of a steel rope and an internal protective sheath made of rubberized fabric. It is recommended to lay the string in a trench using three cranes located along the string at a distance of 15-40 m from each other, depending on the diameter of the pipelines.

Chapter 12. testing and commissioning of pipelines »

Library "

Where are they used?

The scope of application of rigid supports is quite wide. They are used for cold and hot water supply systems, gas and oil pipelines, and heating system pipes. Also, steel pipeline supports are indispensable in the construction of sewerage systems and air conditioning structures.

In production, such supports are used for technological pipeline systems.

In the northern regions of the country, rigid pipeline supports are used for thermal insulation of pipes. Extremely low temperatures have a negative impact on the condition and integrity of the structure and render it unusable.

As already mentioned, such supporting elements are used in those areas of an engineering structure where there is a need to compensate for the loads on it, to protect it from deformations, subsequent temperature changes, vibrations and water hammer.

Fastening

Fastening rigid support devices is carried out in two ways :

1. The steel pipe is fixed to the casing by welding. Next, paronite rings are mounted on the casing. After this, the casing must be covered with a dielectric. In the spaces between the axial connections, already assembled rigid fixed support elements are installed. The next stage is the reinforcement of the supporting structural parts, after which drainage pipes are installed. A shield is welded to the casing, which, after installing the supporting element, is fixed with a concrete mixture. The support is insulated with mineral-polymer foam.
2. A hole is made in the pre-prepared concrete shield. An uninsulated pipe with a paronite ring in the center is placed in it. Next, the edges of the pipe are attached by welding. At the next stage, rigid pipeline supports are installed and stops are fixed to them by welding. The seams must be insulated with a foam-polymer-mineral mixture. Formwork is installed on the stops and the same mineral insulating mixture is poured into special holes.

Fixed supports are installed directly where the pipe structure is being installed. They are attached to a reinforced concrete frame. The distance between the supports is very important. It can be calculated correctly using a bellows compensator.