Many housewives of country houses and summer cottages prefer to use their active leisure time to improve their garden. A light electric saw is used as the main working equipment. For women, such a tool provides a certain level of working comfort, since its weight is light, and the level of noise and vibration complies with sanitary and hygienic standards.
A fairly productive and safe to use garden electric saw runs on a household network, which negatively affects its mobility. In small areas, the problem is solved by using an extension cord of the appropriate length; in large areas, by connecting the tool to a household electric generator.
Electric saw for pruning trees in the garden
Electric saws differ from each other in design features:
- Engine location: transverse - there is no gearbox, increases the dimensions of the device in width, longitudinal - the thickest part is at the handle.
- Cutting part: disk - intended for industry, it can perform a large volume of work, chain - suitable for domestic use.
- Power: minimal, but it is enough to perform all activities on the site.
The advantages of electric saws are considered to be: the absence of exhaust gases and noise, light weight, which reduces the number of interruptions in work. The disadvantages include: the cord from the tool to the electrical network that limits the radius of movement and the low power of the engine, which does not allow it to be used for a large volume of work.
An electric saw for pruning trees in the garden is well suited for periodic work on the site, but for daily work it is better to consider purchasing a gasoline saw.
Types of electric saws
Each electric garden saw consists of an electrical part, a mechanical part and a blade with teeth. Types of tools:
- Saber - an elongated body, looks like a drill, the blade moves in a straight line. It is also compared to a hacksaw. It is distinguished by its low weight and a large number of different files. It is used to trim and cut down branches. It can cut along different trajectories, without support and in any position. Vibration is felt during operation.
- Chain - torque from the engine is transmitted to the chain, which moves along the tire and cuts with teeth attached to it. In the event of an emergency, the chain brake stops operation. Dangerous and traumatic tool.
A power saw is a versatile and productive tool. To work with high branches, you will need a saw with a long handle or a telescopic handle.
How to choose
To select the most suitable electric saw, you should carefully study the following characteristics, which are indicated in the passport:
- handle shape;
- shape and size of teeth;
- type of pruner;
- tool weight;
- length of cable;
- power supply method (from an external source or battery);
- operating features.
Each garden electric tree pruning saw has its own characteristics. Depending on its design, the convenience of its use is determined. For example, the handle of such a tool is of great importance. The speed and quality of pruning branches and knots of various diameters depends on the shape and size of the teeth.
In the process of modernization, the electric saw has turned into a convenient universal tool with a set of necessary functions. For example, the radial arm model successfully combines the capabilities of a miter saw and a circular saw. According to the cutting method, modern electric saws are divided into the following categories:
- tape;
- disk.
The size of the installed teeth is indicated on the saw blade. It is marked with an abbreviation of three Latin letters TPI and two numbers separated by a dash. Using this marking you can accurately determine the size:
- TPI -3-6 marking indicates that the electric saw has large teeth, which are designed for cutting thick branches and even trunks of small diameter (however, remember that the cut is rough and can damage the wood tissue);
- TPI -7-9 marking means that the saw has fine teeth, which allow for smooth, gentle cuts without disturbing the wood tissue.
The presence of large teeth increases productivity, but reduces their quality. Fine teeth increase the time required for cutting, but the cut is high quality.
The shape of the teeth on the saw determines the purpose:
- triangular teeth with oblique angles, sharpened on both sides (outwardly reminiscent of hooks) are used for longitudinal cutting;
- in the shape of isosceles triangles used for cross cutting.
The weight and size characteristics of the electric saw largely determine the duration and quality of the work performed. If such a saw is very heavy, fatigue sets in quickly and it is difficult to hold it. This may result in injury.
The reliability of the manufacturer is of great importance. You should always trust only trusted and well-established companies. An important factor when choosing is the price of the tool. If you plan to use the electric saw occasionally (only in the spring and autumn months), you should consider whether it is worth buying a professional tool in the high price segment.
Additional equipment for carrying out work in the garden and on a personal plot is a pruner. They are manufactured in two types: bypass and thrust. The choice of pruning shears must be made based on the list of proposed works. The bypass model allows you to get smoother cuts after trimming. In this case, only a small part of the branch is deformed. They can be used to trim both living and dry branches. Ideally, it is better to have both types of pruners in your arsenal.
Choosing a power saw for work on the site
To choose the right electric saw, you must first decide what kind of work it will be used for. An electric saw for pruning trees is a cheap tool, suitable if the work is being done near the house and the cable is long enough to connect to an outlet.
For household needs, the efficiency of electric saws is not inferior to their gasoline counterparts and they are easier to care for. To work remotely, you will need to purchase an extension cord and a device to cut off the current if the cable breaks out of the outlet. The appearance of battery-powered models resolved all the issues that arose with these devices.
Options for choosing a quality electric saw
When choosing electric chain saws for wood for the garden and home, take into account the main parameters:
- Engine power: affects tool performance, chain rotation speed, cutting depth. High power – higher productivity, thicker available branches. For a home, 2 kW or less is enough, more for professional models. A powerful engine increases the weight of the equipment.
Important! A powerful engine does not sense voltage changes in the network, which can cause problems when working in dachas.
- Bar length: affects the cutting thickness. Household - up to 40 cm, semi-professional - up to 60 cm, professional - from 60 cm. Household and semi-professional are enough for the home.
- Tooth pitch: The distance between three rivets. For high engine power choose 3/8 inch, for low loads 0.325.
- Weight and ergonomics: comfortable to hold, weight is not immediately felt. Homemade - up to 2.7 kg, professional - from 4 kg.
- Power: battery - for pruning in remote places, near the house - mains power.
- Sharpening angle: for heavy loads – 30 degrees, for complex cutting – 10.
- Chain length: equal to tire size. Over time it stretches out, then several links are removed.
- Engine position: transverse - power is completely transferred to the chain, no kickback is felt. Longitudinal – allows you to cut at different angles, making it easier to cut at height.
A brief overview of low and medium power saws
Leading manufacturers of household electrical equipment allocate a small part of their production capacity for the development and mass production of electric sawing equipment.
Nevertheless, the model range presented on the domestic market allows you to choose a tool that meets basic consumer needs in all respects.
Bosch AKE 30 S
The relatively small electric chain saw of the AKE 30 S series of the famous German brand is produced in Hungary. A characteristic feature of Boshev products is the excellent quality of materials, high-tech production of components and careful assembly.
The performance of the tool, weighing only 3.9 kg, is realized by the traction properties of the standard 1800-watt electric motor and the operating efficiency of the 12-inch saw set.
Despite the budget cost of 5,500 rubles, the Bosch AKE 30 S series model is equipped with a lubrication system with a dosed supply of chain oil to the headset and an inertial emergency stop brake switch.
The advantages of this model:
- ergonomic configuration of the body and handles;
- convenient location of the SDS type chain tensioning mechanism;
- reliable locking of the engine start key.
Parma M6
The small-sized and lightweight (only 3.3 kg) Parma garden electric saw is more convenient for women’s hands. Household tools costing up to 3,000 rubles are distinguished by increased reliability and durability of components, simple and time-consuming maintenance, and a longer working life compared to budget analogues.
- The M6 series model is equipped with a 1000-watt electric motor and a 14-inch saw kit.
- Automatic supply of chain lubrication to the headset design.
- High-speed emergency stop brake mechanism.
Bosch AKE 35 S
The commercial success of the Bosch AKE 30 S electric saw accelerated the development and start of production of its more advanced version of the AKE 35 S series. The traction characteristics of the 1800-watt engine are used to drive a longer 14-inch headset.
- The weight of the tool increased to 4 kg.
- The design of the automatic lubrication and cooling of the headset has been improved in terms of the reliability of the oil pump and visual monitoring of the level of chain lubrication in the 200 ml supply tank.
- The saw chain has a wear-resistant chrome coating.
The latest recorded prices in different regions are in the range of 6100-6300 rubles.
Sturm CC9916
The brand electric saw Sturm series CC9916 was developed in Germany, but the main production is located in China. This model costs up to 3,000 rubles and includes quite a wide range of functionality.
A tool with a 1600-watt electric drive and a 12-inch saw mechanism can be used with equal success for household and various construction work.
The use of light alloys and wear-resistant plastics made it possible to combine performance with a light weight of only 2.9 kg, excellent balance, minimal vibration and noise.
Soyuz PTS-9922
China is the official manufacturer of Soyuz brand electric saws.
Quite powerful, within 2200 W, the budget class model of the PTS-9922 series is equipped with an optimal set of equipment, which includes:
- standard automatic chain lubrication system;
- blocking unauthorized start of the electric drive;
- emergency stop mechanism for the headset circuit.
The product weight of 3.9 kg is partially compensated by centering, convenient grip for horizontal, vertical and the most complex diagonal sawing of wood. In different regions, the cost of the Soyuz PTSS-9922 model varies in the range of 3000-3200 rubles.
ECHO CS-2000-14″
The review ends with a German-assembled Japanese garden electric saw, which is identical in quality and durability to the best designs from leading European manufacturers. The Echo model of the CS-2000-14″ series has a 2000-watt electric motor with double insulation and an overload protection circuit.
The set of replacement saw equipment weighing 4 kg includes:
- professional tire and wear-resistant chain with a tool-free tensioning mechanism;
- brake with inertia switch;
- device for lubrication and cooling of the saw set, with a dosed supply of chain lubrication into the cutting working area.
A tool costing from 10,000 rubles in performance, reliability and durability is not inferior to petrol engine analogues of European brands.
