As standard, the stihl ms 180 chainsaw comes complete with an instruction manual.
Due to the fact that it was developed by professionals from the German company Stihl, the manual for the chainsaw is written very competently and covers all the main points of operation. Let's look at some points of the instructions from which the owner of the saw can obtain the most necessary knowledge.
Safety instructions
This section contains basic recommendations for the correct and safe operation of the Shtil 180 chainsaw.
From this section you can find out what personal protective equipment should be used when working with a saw, how to transport and clean it. Safety when refueling the Shtil 180 chainsaw is highlighted as a separate item.
Another important subsection of safety is precautions and correct behavior when working. The most important points are marked with special signs that attract attention and emphasize the extreme importance of the information.
Structure of the Shtil MS 180 chainsaw - model components
The design of the Stihl MS 180 chainsaw can hardly be called simple - this is due to the operating features of this model. The Shtil 180 chainsaw consists of the following components:
- Ematic guide rail;
- Oilomatic's own saw chain;
- Air filter;
- Throttle valve;
- Cold and hot start lever;
- Control lever;
- Spark plug;
- Handle with proprietary vibration suppression system,
- Powerful engine with extended service life.
The manufacturer took into account the possibility of regular operation of the chainsaw at low temperatures, which resulted in the presence of a proprietary system for smoother and faster engine starting.
Reactionary forces
The instruction point following the safety section attracts attention at first glance with its picture. The information that can be obtained by reading the “Reaction Forces” section is probably unfamiliar to all those who do not read the instructions for Stihl chainsaws, but prefer to immediately start using them.
In turn, those who read it will receive several unique recommendations and tips for reducing chainsaw kickback and the risk of kickback and will find out why the saw chain brake has exactly this shape and location.
Work technique
This section will be useful to study for those who are picking up the MS 180 for the first time. The technique of cross-cutting, cutting downed wood and the felling process itself are touched upon and discussed in as much detail as possible.
I would like to note that some points in the section concerning, for example, cutting down trees in a certain direction, cannot be found in the operating instructions of other chainsaw manufacturers; it is for this reason that the instructions for the 180th are unique in their content.
After reading the section, you can learn how to properly cut a tree trunk, how to trim branches and the main points regarding safe work. Moreover, all these recommendations and methods are illustrated with the help of numerous drawings and drawings that reflect the essence in as much detail as possible. Thus, the section will be understandable even to people who have never had experience using a saw.
The Shtil 180 chainsaw is a household tool, and when developing the instructions, the manufacturer took care of inexperienced users and tried to make it as detailed as possible.
Husqvarna 3120XP review
The 3120XP is the largest chainsaw in Husqvarna's range and one of the most powerful chainsaws in the world. This chainsaw is ideal for professional use. Powerful 118cc engine See Weighing 8.4 hp. This chainsaw comes with a 28-inch bar and a wider 0.04 chain. The chainsaw can be equipped with a larger bar up to 42 inches long. The chainsaw can also be converted to run a 3/8" chain if needed.
Peculiarities
- Powerful 118cc two-stroke engine. Anti-vibration steel springs provide low vibration front and rear handles.
- Air injection ensures longer air filter life and longer air filter cleaning intervals.
- Durable heavy duty air filter. Quick release, snap-on air filter for easy cleaning and maintenance.
- Lock cylinder cover for easy access to air filter and spark plug.
Three piece forged crankshaft for maximum strength. Chrome cylinder liner for durability. Inertial activated chain brake. Side lever for easy chain tension. The starter and motor have been designed to reduce drag by 40%. Push button depressor for easy starting. Adjustable oil pump for increased oil flow when cutting hardwood. Clear color markings for better cutting accuracy. Comes with a 2-year commercial warranty and a 5-year domestic warranty.
Owners of chainsaws or those who are just planning to purchase this necessary tool will find it interesting and useful to familiarize themselves with the rating of chainsaws for quality and reliability. It is for this reason that we have prepared for you the top best and most reliable saws. In this article we will talk about the rating of Chinese chainsaws, and you can also find out which chainsaw is the most powerful. And we will start with the rating of professional saws.
Cutting set and saw bar installation
In these sections, the 180's instructions are devoted to the saw set and its correct installation on the saw. Chain links, its tension, protection and much more, which will be useful to everyone who deals with the tool.
The most important information from this section is how tension control is carried out, and what precautions must be taken to avoid injury from sharp saw teeth.
Fuel and refueling
How and with what to fill the tool, lubricate the chain and the consequences of using low-quality fuel, this is what you can learn about from these sections. In fact, many people think that there is nothing to know there, but this is fundamentally wrong, because in this section the 180’s instructions contain a lot of useful information.
For example, such important points as:
- fuel mixture proportion;
- replacing the fuel filter;
- storage of the finished fuel mixture;
- preparing the Shtil chainsaw for refueling.
It will be useful even for those who have extensive operating experience to read and refresh their knowledge.
Briefly about the launcher
The chainsaw is powered by an internal combustion engine. This is a simple device whose design does not have any special bells. Usually works fine even in difficult conditions.
Operation is ensured by structural elements:
- Carburetor engine (see Carburetor adjustment).
- centrifugal clutches.
- The ignition system in almost all devices is contactless.
- A carburetor that adds air to the fuel mixture.
- Fuel system. Its standard consists of a hose, filter and gas tank, but sometimes it has additional parts.
- starter.
- tire.
- Chain (see Chain oil).
- Chain tensioner and brake (see How to sharpen a chain).
Starting and stopping the engine
One of the most important points that the 180's instructions contain is starting and stopping the saw engine.
According to unofficial data, the majority of calls to the service center for Shtil chainsaws sold within a month are due to the owners violating the start algorithm for the Shtil 180 chainsaw.
The manufacturer has taken all possible measures to reduce statistics. Wrote detailed instructions and organized mandatory consultations during the sale. But users do not want to read paragraphs dedicated to starting a chainsaw and listen to salespeople, which as a result leads to an increase in the number of calls to the service center.
The starting section also indicates the main positions in which it is most convenient to start the saw, and at the same time protect yourself as much as possible from receiving various types of injuries.
You can watch a video on starting a chainsaw, which shows in detail what position the control lever should be in for different modes of starting the saw.
Why does the STIHL chainsaw not start?
To pre-diagnose the causes, check the operation of the fuel pump, the appearance of the spark plug, the flow of fuel, the functionality of the carburetor and the condition of the filter.
Pay attention to the performance of the cylinders, pistons, muffler, and crankshaft bearings. After preventive measures, they try to start the chainsaw
Insufficient lubrication of rubbing parts also becomes a factor in poor performance.
In this article we will look at the main problems that may arise when starting a STIHL chainsaw (the spark is lost, the tool stalls or does not pick up speed), as well as ways to eliminate them.
The final points contained in the instructions of the 180th
In the final part of the article, German engineers have concentrated the most complete information about chainsaw maintenance.
So in the end, the instructions contain the following sections:
- tire maintenance;
- cleaning the air filter;
- carburetor adjustment;
- spark plug;
- storage;
- control and replacement of the drive sprocket;
- all information regarding the technical information of the saw.
A large section is devoted to chain sharpening. You can even say that you won’t be able to find more complete information about sharpening, choosing files and auxiliary tools anywhere except in the Shtil instructions.
The Calm instruction manual is a unique document in terms of the information collected in it, which will be most useful to read both for people without experience and for chainsaw owners with decent experience.
Carburetor adjustment
Correct adjustment of the fuel equipment allows you to combine economical fuel consumption and maximum traction characteristics in the operation of the power unit.
Factory adjustment of the chainsaw carburetor is carried out according to average parameters, therefore, taking into account external factors, it requires additional adjustment.
The standard setup sequence is given in the instructions. In order to adjust the carburetor for maximum performance and efficiency, you must first clean the air intake filter and warm up the engine to operating temperature.
The main causes of decreased thrust, excessive smoke, and increased consumption of the fuel mixture are eliminated by changing the quality and quantity of the fuel-air emulsion with adjusting screws.
