Replacing the trimmer line: step-by-step instructions for replacing the line on the trimmer

Trimmers (aka lawn mowers) are actively used by modern society to care for lawns and other similar gardening facilities. The tool is noted for its high efficiency, despite the dubious quality of cutting grass (compared to an ordinary peasant scythe - earth and sky). The main advantage of trimmers (lawn mowers) is high productivity with little physical effort required by the operator. However, over time, the trimmer's cutting element (nylon line) wears out or becomes damaged, rendering the trimmer a useless tool. Hence, the task becomes urgent - how to replace the trimmer head and how to replace the line of the trimmer head? Let's look at this process using the example of lawn mowers manufactured by Black and Decker and others.

How to replace fishing line on a trimmer?

Replacing the trimmer line with step-by-step instructions will allow even an inexperienced lawn mower owner to perform quite complex work.

However, before starting work on replacing the fishing line on the trimmer, it is necessary to ensure the safety of the work. In particular, measures should be taken to protect against careless or unintentional starting of the lawn mower:

• prevent spontaneous startup,
• remove the battery (if applicable),
• Place the tool on a platform convenient for work.

It is convenient to carry out work on replacing the trimmer line when the lawn mower is lying on the table, and the master who is replacing the trimmer line has the opportunity to approach the tool from any side.

Step 1: Remove the trimmer head cover

The first step of disassembly is to remove the trimmer head cover. Using the example of Black and Decker trimmer models and others, to remove the cover it is usually enough to apply some pressure to press the latch, which is located on the side of the head housing.

On some models of lawn mowers, it is initially necessary to remove the trimmer head, for which you use the hex key included in the tool kit. The head is usually held in place by two or three screws, accessible through the side holes of the rear decorative cover.

The head cover, where the spool of fishing line is installed, is usually held in place by a latch tab. It is enough to press the latch with some force and turn the lid slightly, after which the lid can be easily removed

While pressing the locking tab, you need to slightly turn and lift the trimmer head cover to remove the winding drum.

Step two: removing the winding drum (reel) with fishing line

The next step in the process is to remove the winding drum with line from the inside of the head. You need to turn the head with the open side to see the line and reel. On the side of the head, find two recesses (eyes) through which the fishing line is brought out.

You should release the line from the holes by turning the drum, and then carefully remove the reel from the head area. The winding drum of some models is mounted on a spring. This point must be taken into account when performing the extraction operation.

The procedure for removing the trimmer spool with fishing line from the internal area of ​​the head: 1 – head assembled with the spool; 2 – extraction carefully with a small axial rotation; 3 – extracted parts

The old fishing line is completely removed from the reel. To remove old trimmer line, you need to remove the line from the retaining loops and pull the free end. This method removes all old winding. A similar process is repeated on the second section of the drum. The technician is recommended to use gloves when performing work.

Gasoline trimmers Huter: types and subtleties of operation

Cleaning a personal plot or local area is a very important component that gives a certain place, be it a summer house or the territory of a high-rise building, a pleasant appearance and spectrum. For a long time, traditional devices like an ordinary braid have not been considered effective. They were replaced by such a thing as a gas mower or, as it is also called, a lawn mower. This gasoline trimmer is an effective device that allows you to mow grass quickly and easily. If we talk about the best solutions for weed, then the models produced by the manufacturer Huter are considered higher quality among consumers.

Installing new line on the trimmer reel

Equipping a reel with new fishing line is actually done in the reverse order. The procedure looks something like the following, regardless of the mower model:

Step one: fastening and styling

Fold the end of the fishing line in half. Place the workpiece over the spool on each side of each half of the winding area. Wrap both halves completely around the winding drum. Pull the line through the loop.

The procedure for preparing the line engagement in the area of ​​both winding sections of the drum. The loops are placed in specially made cutouts, after which the fishing line is wound in each zone

It is enough to pull the line tightly and place the knot in the groove made on each side of the winding drum.

Step two: winding the cutting material in sections

The next step is to wrap the line around the reel, being careful. It is necessary that each half is filled with its “own” winding, evenly, without intersections. Usually on the body of the winding drum you can see arrows indicating the direction of winding. This point should be kept in mind when filling the reel with fishing line.

Step three: assembly of the head assembly

Pull the ends of the line through a pair of oval slots on the reel. Replace both washers and the spring (if any in the design) with the new elements included in the package. Bend both ends of the fishing line at right angles.

The final technical touch to the process of replacing the fishing line on the trimmer is to place a cover on the head and then fix it by applying pressure and turning it slightly.

Pass each end through the hole in the base of the winding drum. Place the coil in the inner area of ​​the head with emphasis on the spring. Place the lid, align it with the base and lightly press down with a slight counterclockwise rotation, and place the lid on the locking tabs. This completes the replacement procedure.

Popular models

If we talk about the more popular models of this German company, then we should first call it GGT 2500S. This equipment is considered one of the more productive models and has good technical properties. Its implementation makes it possible to process huge areas and use it both for everyday life and for professional purposes. Its features are as follows:

• Two-stroke engine with air cooling mechanism;
• Electric ignition;
• Power – 2.5 kW;
• Has a vibration suppression mechanism;
• Can produce a bevel width of 25.5 cm.

Another exciting model that may intrigue many is the GGT 1000S. It can be used for professional purposes. It has such main features as:

• Two-stroke engine, as in the previous model;
• Electric ignition;
• Productivity – about one thousand W;
• Can create a bevel width of 25.5 cm;
• Its revolutions are up to 9.5 thousand per minute.

The GGT 1300S will also intrigue many, because it is a powerful and productive trimmer that can cope with any type of vegetation. It is equipped with a vibration suppression mechanism, as well as a lock button and a gas pressure knob lock. It has the same features as previous models, except that the power here is higher - one thousand three hundred watts.

Another gasoline trimmer from Huter that deserves attention is the GGT 1500T. The highest power allows you to complete virtually any task. The model runs on one of the more productive engine models, which allows for routine cutting of almost all thickets, young trees, and thick weeds. It has an anti-vibration mechanism, a convenient shoulder strap, and a manual start mechanism. This model differs from previous ones by the presence of a more powerful motor model with one thousand 500 W, and also by the fact that it produces less noise.

The last model I would like to talk about is the GGT 1900S. It is the second most powerful in the line of this manufacturer with an indicator of one thousand nine hundred watts. The engine installed here was specially designed for the GGT 1900S. Its other features are the presence of an anti-vibration mechanism, as well as the ability to adjust the position of the handle for a more comfortable grip. In addition, the package includes a special protective casing.

Final point of instructions

Typically, the process of replacing fishing line on a trimmer of a particular model is popularly described in the accompanying documentation. Another issue is that this documentation is often supplied in a foreign language, since the notorious lawn mowers for the most part are imported products.

Meanwhile, there is a much simpler, more economical and beneficial way for human health and nature - tidying up lawns with an ordinary peasant scythe. Scythe Blade:

• does not “tear” grass stems,
• does not uproot plants,
• cuts carefully

which is subsequently accompanied by abundantly growing greenery, and not the formation of dead wood as a result of the work of a trimmer.

Using materials: SGS-Engineering

Peculiarities

If we talk about the features of the models of this manufacturer, then first we should say that this company from Germany was founded in one thousand nine hundred and 70 nine. All equipment produced under this brand is created by qualified engineers and developers and is tested at every step of creation. In general, the lawn mowers of this German company are massive and quite productive models. Their use allows you to cut grass in almost all conditions. Very often, the best models of this company are used specifically for professional purposes. One of the fundamental features characteristic of all models of the manufacturer is that Huter brush cutters are equipped with a two-stroke engine with air cooling and electric ignition. This function makes it possible to ensure the highest power of the device and high-quality performance of the intended purpose.

Typical faults and their elimination at home

Oleo-Mac lawn mower repair

During operation, the Oleo-Mac lawn mower must undergo periodic maintenance, which includes:

• checking the oil level, topping up if necessary;
• cleaning the entire machine from dirt;
• checking knife sharpening;
• inspection and cleaning of the air filter;
• checking the condition of belts;
• transmission cleaning;
• Lubrication of wheel bearings.

In a home workshop, you can also perform minor and routine repairs: replacing spark plugs, knives, belts, etc. For more serious repairs, it is recommended to contact a specialized workshop with specialists authorized by the manufacturer. With proper and timely maintenance, Oleo-Mac mowers will last a very long time.

This is interesting: TOP 8 powerful and reliable Patriot trimmers

Oleo-Mac Sparta 25 brush cutter

• Manufacturer: Oleo-Mac
• Class: Home Plus
• Engine power: 1.0 HP
• Cylinder volume: 25.4 cm3
• Handle: Bicycle
• Cutting element: Knife / Line
• Engine type: 2-stroke
• Tube diameter: 26mm
• Fuel tank volume: 0.75 l.
• Model: Sparta25
• Warranty: 24 months.
• Weight: 6.2 kg.
• Country of origin: Italy
• Rating:

Oleo-Mac Sparta 25. brush cutter with high performance, quality and ergonomics.
In particular, I would like to note the fact that the installation of additional bearings, as well as the articulated connection of the engine and the working shaft, provided a significant reduction in vibration, which could not but affect the productivity and quality of work. A backpack belt is used to hold the lawn mower, and a paired bicycle-type handle is provided to control the process. The Oleo-Mac Sparta 25 model takes into account all the comments from its predecessors, namely. a primer for fuel injection was installed and an easy start system was implemented. In addition, the clutch has been improved, which has significantly reduced the load on the working shaft. The standard equipment includes a mowing head with automatic line feed, a 3-prong blade and a protective screen that prevents branches and grass from being thrown to the side. Advantages and features of Sparta

25

Powerful and reliable motor (1 hp / 0.8 kW). Compact and lightweight motor with nickel chrome plated cylinder (Fig. 1). Forged steel crankshaft and connecting rod. Electronic ignition guarantees high performance, easy starting and long service life (Fig. 1).

The Sparta 25 hedge trimmer is easy to start even for the less experienced user. The presence of "PRIMER" ("A" Fig.2), which resembles the mixture of a carburetor, allows you to get started with less effort (Fig.2).Easy access and maintenance of the air filter: the operation does not require the use of tools, but is carried out by pressing the convenient latch ( Fig. 3).The spark plug, despite being protected to prevent damage from impact, is in sight: only the spark plug key is required for cleaning and replacement. The large tank for the fuel mixture allows long autonomy and ease of operation (Fig. 3).Brushcutter comply with current regulations: the ergonomic handle integrates all control elements: the throttle lever, the start and stop switch (Fig. 5), have an accelerator locking safety system (“B” Fig. 4), which prevents accidental acceleration. Centrifugal clutch with sliding blocks, coated with anti-friction material, designed to withstand long-term operating conditions (Fig. 5). The transfer tube (Ø26 for SPARTA25), all aluminum, guarantees excellent resistance to low weight. The fuel tank is protected from accidental collisions (“C” Fig. 6) .Reduced vibrations to a minimum thanks to:. five self-lubricating bushings located inside the transmission tube (“D” Fig. 7). anti-vibration on the engine cover. anti-vibration on the handlebar support (only SPARTA25) “E” Fig.8) Flexible transmission shaft (SPARTA 25TR) made of steel with a special shell along the entire length (“F” Fig.9) prevents irritating vibrations from the operator and increases the service life of the machine. Adopting a transparent tank makes it easier to visualize the fuel level. There is also a mount for the wiring harness on the handle (optional for SPARTA25TR).

Oleo-Mac Sparta 25 brush cutter | Video review

Preliminary preparation

First, to wind the fishing line, you need to remove the reel (spool, spool) from the trimmer. Certain actions will depend on the complexity of the configuration and the type of product itself:

• Small electronic trimmers with a working motor and coil located at the bottom usually have side buttons on both sides of the reel. By simultaneously pressing them, the upper part of the reel, together with the internal contents for winding the fishing line, is disconnected, while the lower part remains on the trimmer. It is better to disassemble the bobbin on a flat, smooth place so that the spring included in the design does NOT jump out and get lost;
• Electronic and gasoline trimmers with a curved rod without the ability to install a knife usually have reels with special wing nuts: in similar designs, you should hold the spool in a motionless position with one hand, and with the other turn the wing nut that secures the bobbin to the rod counterclockwise. After disconnecting the nut, the entire bobbin is removed.
• Electronic and gasoline trimmers with the ability to install a knife on a straight rod (for example, Stihl trimmers) have a hole under the reel. To keep the rod stationary, a screwdriver or other suitable object is inserted into this hole, and with a slow rotation, such mutual placement is achieved when the screwdriver goes inside the hole and the reel is fixed. After which the coil body is rotated clockwise (with a left-hand thread) and removed from the trimmer.

For the second and third options, the coils, depending on the design, are disassembled using different methods. In reels, the lamb is turned out, in reels, the latches are pressed and one part of the reel is released from the other. If the halves of the spool are connected by thread, then it is enough to turn them by hand in the opposite direction until they are completely unscrewed.

Basic malfunctions and repairs of Oleo Mac

The manufacturer does not recommend carrying out complex repair work on your own. The best option would be to contact a service center. The list of Oleo Mac service centers is listed on the company’s official website in Russia.

Chainsaw Oleo-Mac GS 35 – tool capabilities

A small-sized portable saw belongs to the amateur garden household tools. The model was initially created to solve small household problems, including harvesting small logs and cutting down dry and putrid branches.

The Oleo-Mac 35 chainsaw is equipped with a reliable gas engine equipped with a branded Japanese carburetor and a redesigned system for damping vibrations created by the internal combustion engine. An iron impact-resistant crankshaft is embedded in the motor base, capable of spinning the saw set to a speed of about 9000 rpm.

For an emergency stop of the chain in case of unexpected events, this Oleo-Mac model is equipped with a reliable inertia brake. The chain is tensioned by turning the screw. It is protected by a shock-resistant plastic cover, by removing which the operator can repair the mechanism.

Features of this portable chain saw include:

• industrial motor power – 2 l. With.;
• tank capacity for fuel/chain lubrication – 360/260 ml;
• The length of the mounted tire recommended by the brand is 35 cm;
• weight – 4.7 kg.

A wear-resistant oil pump, which operates properly in one hundred percent automatic mode, is responsible for lubricating the installed sawing parts in the initial factory equipment of the saw.

Master class: weaving a wire pendant “Tree of Life”

Spring has fully come into its own and we thought that today’s master class on weaving a wonderful “Tree of Life” pendant from wire would fit right in with the theme. After all, what is spring if not the rebirth of life after a long sleep? The ancients, not unreasonably, imagined the annual cycle of the seasons precisely as the sequential movement of nature from birth to death, and spring quite naturally symbolized precisely its birth.

The “Tree of Life” symbol itself is found in almost all world cultures.

Be that as it may, the image of the Tree has a uniquely positive meaning, symbolizing the unity of nature and the eternal cycle of life.

In our master class we will use the Celtic version of this symbol, which is most widespread in the modern world and is often used in the production of decorative products, costume jewelry and religious paraphernalia.

We wish you pleasant and, most importantly, successful creativity!

Sketches of the “Tree of Life” are easy enough to find on the Internet.

Fishing line - varieties and the possibility of replacement with other material

The cord for the trimmer can be of different diameters (from 1.2 to 4 mm), and you need to choose it depending on what kind of vegetation needs to be mowed - the thicker the line, the coarser the grass it will cope with. Experienced users recommend using a fishing line with a thickness of 2 mm, which is universal.

The shape of the fishing line can be round (for lush grass) or with sharp edges in the form of a square or star (for mowing dry grass). The second type is less durable and wears out faster compared to round cord.

One of the popular questions regarding the operation of trimmers is whether it is possible to replace the special cord for mowers with other materials, for example, metal or steel cables and strings, wire, etc. You need to know that installing such items is not recommended, because with them the trimmer turns into a dangerous technique. During mowing, pieces of wire or metal will constantly break off and fly in different directions, risking injury to the worker. And if you accidentally touch your limbs while working, serious injury is guaranteed.

For trimmer owners wondering whether it is possible to use fishing line, the answer is that this is allowed, but it will tear and wear out much faster, and therefore require frequent replacement.

Advice! Fishing line is well suited for cleaning grass near a fence or metal mesh - instead of wasting expensive trimmer cord, you can load large-caliber tackle (2-3 mm), which costs much less.

Safety precautions

To quickly and safely replace the fishing line on the mower reel, you must follow safety precautions. Before removing the reel to wind the line onto the lawn mower, you must disconnect the equipment from the power supply (if the mower is powered by electricity). Here I would like to mention the reliability rating of electric lawn mowers, which will help you choose a safe assistant.

Another important safety rule that must be followed is pressing the lock button. You can find out its location on the equipment body using the instruction manual.

For example, you will find operating instructions for a manual gasoline lawn mower here.

Do not forget that the cutting element needs to be adjusted. There is an adjustment button on the body of the unit. If the process does not start automatically and the thread tension has weakened, then the button is pressed and the line is pulled out of the spool with force.

It must be remembered that replacing the line in a lawn mower is an important process that requires responsibility. Everything must be done in stages, and only a special polyethylene fishing line should be inserted into the reel. An iron cable, some kind of high-quality wire or even reinforced fishing line will not work here.

Watch the video instructions.