Corded screwdriver: types, selection criteria, rating of the best models

Expert: Andrey Nikolaevich Kuznetsov

*Review of the best according to the editors of expertology.ru. About the selection criteria. This material is subjective in nature, does not constitute advertising and does not serve as a purchase guide. Before purchasing, consultation with a specialist is required.

A mains-powered screwdriver is an indispensable tool for specialists in the field of interior decoration, furniture assembly and other areas where it is necessary to tighten a lot of fasteners. Unlike battery-powered devices, it doesn't run out of charge at the worst possible moment - even if you spend the whole day screwing or drilling.

Especially for home craftsmen and professionals in the field of carpentry and finishing work, we have compiled a rating of the 14 best corded screwdrivers, which are distinguished by good performance and the best price.

How to choose a corded screwdriver for your home

When choosing a corded screwdriver that you plan to use at home, it is advisable to pay attention to the following parameters:

Power

– a parameter that determines the performance of the device. The higher it is, the longer the screws you can screw in. So, for example, a 300-watt screwdriver will be able to pierce a thin metal plate with fasteners, and a 600-watt screwdriver will be able to pierce a relatively thick one. But it is worth remembering that the more powerful the device, the heavier it is.

For home use, a 400-600 Watt screwdriver is sufficient. More powerful devices belong to the semi-professional class and should only be purchased if there is a real need.

Moment of force (torsion)

– another parameter demonstrating the performance of a screwdriver. The higher it is, the longer the fastener can be screwed using a tool. Thus, a screwdriver with a torque of 30 N×m can easily screw a self-tapping screw up to 70 mm long into a wooden base. But for 100 mm fasteners it is better to take a more productive device - from 40 N×m inclusive.

Presence of a reverse mechanism

determines the usability of the device. If there is one, then the screwdriver will be able to unscrew bolts and screws. If it’s not there, well, you’ll have to use a screwdriver.

Availability of rotation speed adjustment

– an important parameter for those who plan to use different materials (for example, screw self-tapping screws into plastic, wood or metal) and drill using this tool.

Chuck type

also determines usability. There are three types of heads:

1. The key cartridge
   is fixed with a special key. It needs to be tightened, this takes time and effort, but the bit or drill is fixed very securely - you can work with hard materials.
2. The keyless chuck
   locks into place in one movement. Its main disadvantage is low reliability, as a result of which screwdrivers equipped with it are not recommended for use with hard materials (hard wood, metals).
3. The bit holder (bit)
   is compatible, as the name suggests, only with bits. Drilling with a screwdriver equipped with such a mount will not work. It occurs infrequently, is characterized by reliable fixation, but narrow specialization.

Both a key chuck and a quick-release chuck are suitable for home use.

conclusions

When choosing a corded screwdriver, you need to pay attention to the following nuances:

• important indicators are the power consumed by the device, the maximum torque and the presence of a two-speed gearbox ;
• It is worth taking into account the number of revolutions per minute of work, the diameter of drilling metal and wood, as well as the length of the wire for connecting to the network;
• In addition, you should ask your consultant for information about the number of operating modes, functionality, configuration and duration of the warranty period.

Which screwdriver is better, corded or cordless?

To compare these two types of screwdrivers, you can select only a few parameters.

Thus, it can be argued that a cordless screwdriver for the home is lighter, more mobile and simply more practical - however, a corded screwdriver is in most cases more powerful and cheaper, and is also suitable for working in cold weather.

Video description

Video tips for choosing a corded screwdriver:

• Makita FS4300 570.

One of the best 570-watt model in the review of networked screwdrivers in this price category. The number of revolutions per minute is 4000. The chuck is equipped with a depth limiter for twisting the hardware.

Advantages:

1. Backlight.
2. Great power.
3. Ergonomics.
4. Metal gearbox housing.
5. Maximum continuous use time.

The main drawback is the inability to install drills, since the chuck is designed only for bits.

• SPARKY BUR2 350E.

Impact type model. Drive power – 1050 W. The maximum speed is 2000 per minute, and the number of blows is up to 36 thousand/min.

Pros:

1. Great power.
2. Expanded functionality.
3. Smooth speed controller.
4. Ergonomics, ease of use.
5. Reliability.

The instrument does not show any obvious shortcomings.

Note! In order to determine which corded drill/driver is best suited for specific application conditions, it is necessary to take into account that budget models have a weak motor and an insufficiently durable body, while expensive ones have high functionality, reliability and adaptability to long-term loads.

Rating of the best networked screwdrivers

Popular models

To choose the best corded screwdriver model, we recommend studying the review of popular devices from brands you can trust.

The best models in terms of price and quality ratio

TOP 6 best networked drills and screwdrivers in terms of price and quality ratio.

Makita DF0300, box, 320 W

A powerful corded pistol-type screwdriver with a bat included, which has a fairly compact design and low weight, making it comfortable for the craftsman to work with.

Despite its modest functionality, the device can be used not only for domestic purposes, but also for carrying out repair work at a professional level.

Two speed ranges allow you to select the optimal mode for drilling a wide range of materials.

A quick-release chuck is available.

Specifications:

• power consumption by the device - 320 W;
• maximum torque - 56 Nm;
• number of revolutions per minute of operation - 1500;
• wood/metal drilling diameter - 28 mm/10 mm;
• two-speed gearbox - yes;
• wire length for connecting to the network is 2.5 m.

Advantages

• work with minimal sound;
• long operational period;
• support for multiple modes;
• ease of maintenance;
• acceptable price.

Flaws

• smell from the case;
• you need to understand the settings;
• standard equipment.

Hanskonner HID2145P, 450 W

An improved network model, which is positioned by the manufacturer as professional equipment for construction and repair work.

The tool can be used as a drill for efficient drilling - thanks to its convenient design and well-thought-out safety system, even a craftsman with little experience can easily cope with the required scope of work.

The body of the tool is impact-resistant, and the handle is supplemented with rubber pads - with them, the electrical device will definitely not slip out of your hands and will lie comfortably in the palm of your hand.

Specifications:

• power consumption by the device - 450 W;
• maximum torque - 45 Nm;
• number of revolutions per minute of operation - 1500;
• drilling diameter for wood/metal - 20 mm/13 mm;
• two-speed gearbox - yes;
• wire length for connecting to the network is 2.5 m.

Advantages

• simplicity and ease of use;
• reliable locking mechanism;
• excellent fasteners;
• instant change of equipment;
• simple instructions for use.

Flaws

• the wire could be longer;
• number of modes;
• slight whistling noise during operation.

Sturm! ID2145P, 450 W

A device with a high-quality motor and a quick-release chuck, presented in a durable pistol-type housing.

High-performance equipment attracts with its low weight and comparative compactness, as well as optimized weight distribution.

The model also includes a slide-type reverse switch.

Among the additional useful options, it is worth highlighting the presence of an electronic speed controller and a torque limiting clutch. The cable length is 4 meters.

Specifications:

• power consumption by the device - 450 W;
• maximum torque - 35 Nm;
• number of revolutions per minute of operation - 1500;
• wood/metal drilling diameter - 28 mm/10 mm;
• two-speed gearbox - yes;
• The length of the wire for connecting to the network is 4 m.

Advantages

• decent equipment;
• relatively low price;
• sophisticated security system;
• durable power cord;
• tight assembly.

Flaws

• heating during prolonged operation;
• expensive repairs;
• guarantee period.

Makita FS4000, 570 W

A model worthy of special attention, equipped with a single-speed gearbox, flag reverse and the ability to lock the power button for safe use.

The device is perfectly balanced, has an ultra-ergonomic handle and is lightweight.

The tool allows the master to master fairly large working volumes with a certain skill - it will take a little practice.

The device is equipped with an electronic chuck rotation speed limiter and a metal bracket for conveniently attaching equipment to your belt - no more inconvenience.

Specifications:

• power consumption by the device - 570 W;
• maximum torque - 16 Nm;
• number of revolutions per minute of operation - 4000;
• wood/metal drilling diameter - no data;
• two-speed gearbox - absent;
• wire length for connecting to the network is 3.5 m.

Advantages

• good power indicator;
• high-quality assembly;
• presentable design;
• impeccable materials;
• The device does not put any strain on your hand.

Flaws

• the device may heat up;
• handle ergonomics;
• there is a plastic smell.

Interskol DSh-10/260E2 1012200000, 260 W

Pistol-type drill-driver with a locking function for the power button and a quick-release chuck, as well as a slider reverse.

The hammerless tool operates in two modes and copes well with solving all kinds of complex problems.

For example, with the help of this model, a novice craftsman can easily assemble various structures or drill a hole.

A special feature of the device is a well-thought-out electronic speed control - you can work comfortably and without the slightest fear.

Specifications:

• power consumption by the device - 260 W;
• maximum torque - 35 Nm;
• number of revolutions per minute of operation - 1800;
• drilling diameter for wood/metal - 25 mm/10 mm;
• two-speed gearbox - yes;
• wire length for connecting to the network is 2.5 m.

Advantages

• excellent balance;
• long warranty from the manufacturer;
• light weight of the device;
• no effort is required to tighten the cartridge;
• nice appearance.

Flaws

• mediocre cooling system;
• noisy work;
• equipment.

PATRIOT FS 306, 300 W

The equipment is presented in a shock-resistant pistol-shaped case, the operation of which is carried out from the network.

For safe operation of the device, the manufacturer has added a power button lock to the electrical device.

Now the tool can be placed in close proximity without worrying about accidentally turning on.

The device is also supplemented with a special depth limiter, which does not allow you to go beyond what is permitted.

Complete with a powerful network device, the buyer will also find an informative instruction manual, with the help of which he can easily understand the operating issues.

Specifications:

• power consumption by the device is 300 W;
• maximum torque - 35 Nm;
• number of revolutions per minute of operation - 1390;
• drilling diameter for wood/metal - 20 mm/10 mm;
• two-speed gearbox - yes;
• wire length for connecting to the network is 3.5 m.

Advantages

• safe and comfortable handle;
• full functionality of the device;
• successful shift clutch;
• reverse rotation support;
• good power cable.

Flaws

• registration questions;
• weight balancing;
• success of lighting.

The best inexpensive models

Rating and review of the best inexpensive drills and screwdrivers based on customer reviews and ratings.

BISON DSH-M3-500-2 box, 500 W

A high-power corded tool that has almost all the advantages of cordless screwdrivers from premium lines.

However, it is precisely because of the lack of a battery that the device is considered more reliable and durable.

For efficient drilling, a two-speed gearbox is provided here.

For comfortable work with various materials and fasteners, smooth adjustment of the rotation speed is provided.

The convenience of carrying out repair and finishing work is facilitated by the presence of bright lighting, which will illuminate the work area.

Specifications:

• power consumption by the device is 500 W;
• maximum torque - 45 Nm;
• number of revolutions per minute of operation - 1800;
• wood/metal drilling diameter - 28 mm/10 mm;
• two-speed gearbox - yes;
• The length of the wire for connecting to the network is 5 m.

Advantages

• ratio of quality and price;
• excellent moment of power;
• ergonomics at a high level;
• rich functionality;
• Start key lock.

Flaws

• convenient location of buttons;
• the case may heat up;
• weight increased.

BISON ZSSh-300-2, 300 W

An easy-to-use corded tool with a limiting clutch and two-speed gearbox.

The device will be an excellent solution for a master who is just starting to work with such equipment and does not have sufficient experience.

A significant advantage of the equipment, oddly enough, was the absence of a battery - the presence of a long wire allows you to work for a long time.

Additional functionality is provided by the ability to lock the power button and several operating modes.

Specifications:

• power consumption by the device is 300 W;
• maximum torque - 35 Nm;
• number of revolutions per minute of operation - 1400;
• wood/metal drilling diameter - 28 mm/10 mm;
• two-speed gearbox - yes;
• The length of the wire for connecting to the network is 5 m.

Advantages

• operation is almost silent;
• decent air cooling;
• thoughtful speed control;
• there are convenient switches;
• stable operation without interference.

Flaws

• power indicator;
• replacing bits requires some effort;
• complicated instructions.

RESANTA SSh-550-1, 550 W

An effective pistol-type corded screwdriver, with which you won’t have to spend too much time studying the manual for proper use.

The device has an intuitive control system, an ergonomic handle with a rubber anti-slip pad, and a slider reverse - ideal for both beginners and professionals with extensive work experience.

For comfortable drilling in areas with insufficient lighting, the manufacturer has supplemented the tool with bright spot lighting.

With it, the user can easily drill a hole of the required diameter without touching anything unnecessary.

Specifications:

• power consumption by the device - 550 W;
• maximum torque - 25 Nm;
• number of revolutions per minute of operation - 800;
• drilling diameter for wood/metal - 25 mm/10 mm;
• two-speed gearbox - absent;
• wire length for connecting to the network is 2.5 m.

Advantages

• solving a wide range of problems;
• good engine cooling system;
• high strength cable;
• impressive functionality;
• impressive ergonomics.

Flaws

• strong plastic smell;
• successful design;
• slow twisting.

Instar EDR 21650, 650 W

A non-impact model with a brush motor and a fastening chuck, devoid of serious drawbacks, equipped with a huge range of useful functions.

The network equipment is presented in a pistol design, so using the equipment will be as comfortable as possible.

There is also a small balanced handle with a special coating that does not allow the device to slip out of the user’s hands at the most crucial moment.

The device is not equipped with a spotlight, but users claim that this is not a significant disadvantage.

Specifications:

• power consumption by the device - 650 W;
• maximum torque - 56 Nm;
• number of revolutions per minute of operation - 750;
• wood/metal drilling diameter - 23 mm/10 mm;
• two-speed gearbox - absent;
• wire length for connecting to the network is 2.5 m.

Advantages

• high power indicator;
• convenient reverse switch;
• light weight of the device;
• there is an excellent start key;
• The device hardly heats up.

Flaws

• lack of spot lighting;
• simple delivery set;
• components are difficult to find on sale.

The best models with a shock function

Makita HP0300 box, 320 W

A networking tool that you simply cannot pass by.

The equipment has every right to boast of a successfully installed gearbox, the ability to instantly replace carbon brushes, as well as the presence of a reverse switch, which is conveniently located on an ergonomic, high-strength body.

In addition to the wide range of functions, the equipment attracts with its excellent safety system and long service life.

Especially for fast and efficient drilling in masonry, the device has an additional mode.

Specifications:

• power consumption by the device - 320 W;
• maximum torque - 56 Nm;
• number of revolutions per minute of operation - 1500;
• wood/metal drilling diameter - 28 mm/10 mm;
• two-speed gearbox - yes;
• wire length for connecting to the network is 3.5 m.

Advantages

• silent device;
• performing tasks at a professional level;
• compatibility with components from other brands;
• reliable materials;
• flawless assembly.

Flaws

• expensive repairs in case of breakdown;
• standard delivery set;
• The case heats up during long periods of use.

Elmos ESR913C, 910 W

Impact device with depth limiter, additional handle included and a case for transportation and compact storage.

The high-tech tool operates in two speed modes, perfectly coping with any task due to its high power.

The device weighs a little - only 2.2 kg, so it is convenient to work with it for a long period of time.

The power button locking function is also implemented in network-type equipment, which significantly increases the level of safety of the equipment for the user.

Specifications:

• power consumption by the device - 910 W;
• maximum torque - 56 Nm;
• number of revolutions per minute of operation - 1700;
• drilling diameter for wood/metal – 40 mm/13 mm;
• two-speed gearbox - yes;
• wire length for connecting to the network is 3.5 m.

Advantages

• maintainability of the tool;
• well thought out equipment;
• amazing balance;
• There is a button lock system;
• The device hardly heats up.

Flaws

• there is a noticeable smell of plastic coming from the case;
• increased sound;
• hard network cable.

Hammer DRL320 PREMIUM, 320 W

A network tool with excellent technical performance.

Designed for drilling metal, wood, ceramics and brick, which is also suitable for effective work with a variety of fasteners.

The device is presented in a plastic case - it is impact-resistant, which means that all internal structural elements are reliably protected from any damage.

The power tool does not need to be grounded because the metal parts are double insulated.

Another important advantage of the model is the ability to change attachments in just a few seconds.

Specifications:

• power consumption by the device - 320 W;
• maximum torque - 35 Nm;
• number of revolutions per minute of operation - 1500;
• wood/metal drilling diameter - 28 mm/10 mm;
• two-speed gearbox - yes;
• wire length for connecting to the network is 3.5 m.

Advantages

• spare parts are readily available;
• electrical wire of sufficient length;
• no whistling during long work;
• ergonomics at a high level;
• compactness of the body.

Flaws

• heating at maximum power;
• the wire is quite hard;
• success of instructions.

The best inexpensive corded screwdrivers

Sturm! ID2145P

Rating: 4.9

This budget corded screwdriver with hammerless drill function is an excellent solution for home use. At a relatively low price, it is equipped with a 450-watt motor, which provides a torque (torsion) of 35 N×m. The tool is suitable for screwing long fasteners into materials of medium and high hardness.

The device is equipped with a quick-release chuck suitable for both bits and drills. Diameter – 10 millimeters. Operation at two speeds is supported, and maximum rotation is at 1400 rpm. The frequency is controlled electronically. Reverse rotation supported.

For operational safety, the screwdriver is equipped with a power button locking system. The device is designed with a 4 meter long network cable, eliminating the need for extension cords.

Advantages

• Metal gearbox and gears, which guarantees a long service life;
• Easy to maintain, including replacing electric motor brushes;
• Supports two speed modes.

Flaws

• Plastic case with a rather strong smell in the first days;
• Poor package, no case included;
• Unreliable power button locking mechanism.

Kinds

There are the following types of network screwdrivers:

1. Impact or impact screwdriver - the force is high-frequency impacts. They are distinguished by high torque (about 250 Nm) and ease of use - the load on the user's hand is reduced.
2. Drill-driver – there is a drill mode with an increased speed.
3. Band screwdriver – threads the band with hardware. This type is used in professional construction and repair work.
4. Classic hammerless screwdriver without additional functions.

Corded screwdrivers are divided into:

• “Pistol” – usually these are budget models with a plastic body. The motor shaft is attached directly to the chuck. The disadvantage of this form is the need to apply force and press in the hardware when tightening. Also, the plastic “gun” is prone to overheating.
• T-shaped - unlike a pistol, the handle is located closer to the center of the body. This design is more ergonomic and requires less effort during operation.
• The body is shaped like a classic drill - a sign of a professional-class tool. The force on the cartridge is transmitted not directly from the engine, but through a gearbox. Thanks to this design, the rotation of the bat is smoother.

Why do you need a screwdriver?

A screwdriver is a hand-held power tool that has adjustable torque, which is necessary for tightening/unscrewing various kinds of hardware, as well as for drilling holes. The scope of application of the device is very wide: installation/dismantling of various structures and equipment, assembly or repair of cars, furniture production, housekeeping work, etc. The scope of use can be significantly expanded depending on the category to which the tool belongs. A professional drill-driver can be used not only for its intended purpose.

Other ways you can use screwdrivers:

for grinding surfaces;

The screwdriver can be used for sanding

• as a mixer when stirring construction mixtures;
• for drilling holes in ice;
• when cutting threads and tying reinforcing bars;

Example of use for tying reinforcement

• for cutting materials;
• as a chopper;
• for twisting wires.

A screwdriver can be used in many different ways

The design of different types of screwdrivers is quite similar. Main elements of the tool:

• frame;
• cartridge;
• start button;
• adjusting the direction of shaft rotation;
• regulators for the number of revolutions and the degree of tightening.

Screwdriver device

The chuck of a power tool can be a universal quick-release (three-jaw) or a turnkey one

The second option is distinguished by a more reliable clamping of the nozzle (this is especially important when drilling), but using the quick-clamping mechanism, you can very quickly change equipment

Types of instruments

The scope of use of screwdrivers is largely determined by the category they belong to: professional or household tools. When deciding on a model, you need to correctly assess the purpose of using the tool and the possible scope of work.

Types of screwdrivers

1. Household devices are great for carrying out repair work at home or in the country; they allow you to install a fence, assemble furniture, hang cabinets, etc. Quite modest indicators of power and torque are quite enough for such operations. But household screwdrivers are quite affordable.
2. More productive equipment is able to tighten powerful fasteners and drill through material. It can be used for a long time, most often equipped with a quick-change system for nozzles, variable speed control and a brushless motor with higher efficiency and compact dimensions. The torque of a professional tool can reach 130 Nm.

The difference between a professional and household screwdriver in resource

Some models can replace a drill, which allows you to optimize the number of power tools in the household.

Depending on the method of power supply, screwdrivers can be divided into two classes:

rechargeable, operating from the charge accumulated by the batteries;

Cordless screwdriver

network ones, which are connected to the outlet via an electrical wire.

Corded screwdriver

The first option is more convenient where there are problems with connecting to the power grid, since it is autonomous. However, there is a limitation on the operating time of the power tool: it depends on the battery charge. Most often, battery models are more expensive than their counterparts connected to an electrical outlet.

A corded screwdriver does not need to be charged; it can work from the network as long as required. However, to use it, you must have an electrical supply. In addition, the wire limits mobility and prevents the master from moving freely. But when carrying out long-term work, this device option is optimal.

The corded screwdriver does not need to be charged

Another difference is that the power unit of the network model operates on an alternating voltage of 220 V, and the motor of battery-powered analogues operates on a constant voltage (its value is usually in the range of 3.5...36 V).

The operating principle of the tool does not depend on their type. Electricity from the mains or battery makes the engine run. From it, through the gearbox and shaft, force and speed are transmitted to a nozzle fixed in the chuck, which carries out drilling or installation/disassembly of hardware.

The internal structure of a screwdriver