Rating of TOP-8 edge milling machines: review of the best corded and battery-powered models

Expert: Konstantin Borisovich Polyakov

*Review of the best according to the editors of expertology.ru. About the selection criteria. This material is subjective in nature, does not constitute advertising and does not serve as a purchase guide. Before purchasing, consultation with a specialist is required.

Edge routers are used for lateral processing of the edges of workpieces or creating grooves. With their help, grooves are selected, grooves are made, chamfers are removed, and the corners of the board are rounded. The power tool is so delicate that it carefully processes materials covered with laminate or veneer. Trimmers can be used not only on wood, but also on drywall or tiles. Let's figure out how to choose an edge router and which models are most praised by customers in reviews.

Rating of the TOP 8 best edge milling machines

Page navigation:

VORTEX FM-470K

A domestic development with good immersion into wood - up to 4 cm. Motor power - 470 W, which is enough for 30,000 rpm. Thanks to the low cost of 3 thousand rubles. is very popular.

Among the positive aspects of such a power tool are:

• good performance indicator;
• provides electronic adjustment of the number of revolutions per minute;
• depth of immersion in dense wood – up to 4 cm.

The equipment weighs 2.5 kg, which is considered one of the disadvantages of the domestic Vortex.

What features of edge routers should you pay attention to when choosing?

The key parameters of edge routers that you should pay attention to when choosing include the following:

• Type of food. You can find both corded and cordless edge milling machines in stores. The former are characterized by increased power and better performance, the latter, being completely autonomous devices, allow you to work in conditions with no power grid.
• Power consumption. This characteristic is related to the performance of the unit. A powerful milling cutter will provide high speed operation, no engine heating under prolonged loads, and the ability to use different equipment. For household use, a device with a power of 400-600 W is suitable; for regular use at a professional level, equipment with a power of 600-900 W is recommended.
• Maximum speed. Low speed models are suitable for processing soft materials. High router speeds are recommended if you need to work on hard surfaces.
• Milling depth. Depending on the model and class of the unit, there are milling cutters with a tool stroke from 20 to 80 mm. This parameter is related to the depth of the grooves created and the thickness of the workpiece being processed.
• Functionality. Useful options increase the productivity of the router and the ease of working with it. The speed regulator allows you to adapt to materials with different densities, smooth start minimizes the starting jerk, protection against accidental start and automatic shutdown in case of overload are responsible for the safety of the device and the user.

Bosch GKF 600 Professional

The German brand offers the most reliable edge routers for professional use. The light weight of the model of 1.5 kg does not affect the power provided by the 600 W motor. The set includes collets with a clamping diameter from 6 to 8 mm, which makes the machine universal.

The advantages of the model include:

• cast aluminum base and elegant frame made of durable plastic;
• high power for hand tools – 600 W;
• easy adjustment using a latch flag and movement of the base.

Disadvantages include the lack of an inclined base included in the configuration.

Review of the best network edge routers

Network models are distinguished by decent characteristics, low price and reliability . They are always popular among users.

Rating of the TOP 5 best network edge routers for wood in terms of price and quality ratio.

Makita RT0700CX2, 710 W

The Makita RT0700CX2 edge router, equipped with all sorts of functions, is ideal for processing the edges of wood products that have a flat shape.

The model provides the ability to create curly, oblique or rounded edges.

In addition, the device will help in creating grooves of various shapes.

The tool is equipped with a rotation speed control system from 10,000 to 30,000 rpm, a spindle lock for quick replacement of working equipment, and a guide sleeve that allows cutting according to a template prepared in advance.

The cutting depth is adjusted using a rubber roller.

The product delivery set includes collets, keys, and other accessories and fixtures.

Specifications:

• power consumption - 0.71 kW;
• maximum speed - 30,000 rpm;
• milling depth - 3.5 cm;
• collet sizes - 6 mm, 8 mm;
• functionality - speed control, rotation stabilization, soft start, turret stop, fine tuning, spindle lock, vacuum cleaner connection;
• device weight - 1.8 kg.

Advantages

• high quality workmanship;
• rich functionality;
• good equipment;
• ease of use.

Flaws

• storage case too large;
• short stop rods;
• high noise level.

Makita RT0700C, 710 W

The Makita RT0700C edge milling machine, operating in a speed range from 10,000 to 30,000 rpm, will allow you to process materials such as wood, chipboard and fiberboard with ideal results.

The device is equipped with a smooth speed control system, a cutting depth limiter, a spindle lock, and overload protection.

The device allows milling with a maximum depth of 25 mm.

Additionally, the device is equipped with a speed stabilization system under load.

The instrument is connected to the power supply using a 2.5 m cable.

The delivery set includes a straight guide, 6 and 8 mm collets, and keys.

Specifications:

• power consumption - 0.71 kW;
• maximum speed - 30,000 rpm;
• milling depth - 3.5 cm;
• collet sizes - 6 mm, 8 mm;
• functionality - speed control, rotation stabilization, soft start, spindle lock, connection for a vacuum cleaner;
• device weight - 1.8 kg.

Advantages

• optimal power;
• presence of speed control;
• high-quality materials and assembly;
• convenient round platform;
• two types of collets included.

Flaws

• the metal cylinder is susceptible to scratches;
• not the best ergonomics;
• high price.

Wortex MM 5013-1 E, 710 W

The Wortex MM 5013-1 edge miller with a powerful 710 W electric motor will provide high-quality edge milling of wood, plywood and laminate products.

The presented product is characterized by compact dimensions.

The ergonomic design of the case makes it easy to hold the model in your hands.

The milling cutter supports work with 6 and 8 mm collets, the device is equipped with a system for smooth adjustment of the immersion depth.

The device is equipped with collets, a pipe for dust extraction, a parallel guide, a stop, carbon brushes, a key and operating instructions.

Specifications:

• power consumption - 0.71 kW;
• maximum speed - 30,000 rpm;
• milling depth - 2.2 cm;
• collet sizes - 6 mm, 8 mm;
• functionality - speed controller, spindle lock, vacuum cleaner connection;
• device weight - 1.45 kg.

Advantages

• Ease of use;
• compact dimensions;
• light weight;
• excellent performance.

Flaws

• vibration during operation;
• case heating under load;
• short power cable.

Makita 3709, 530 W

Makita 3709 corded edge router with 530 W electric drive power, supporting the installation of a cutter with a 6 mm collet.

It is the ideal solution for precision machining of wood, plasterboard, composites or ceramics.

The tool also allows you to create holes and select grooves in materials.

The device has small dimensions and weight, the product will be convenient when performing work with one hand.

The milling cutter is equipped with a transparent base, which provides comfortable observation of the working area of ​​the tool and adjustment of the movement of the equipment.

The instrument receives power from the network; it is connected to it with a 2.5 m long network cable.

The device is equipped with a rip fence, a contour guide, a collet, a cutter, keys and a template guide.

Specifications:

• power consumption - 0.53 kW;
• maximum speed - 30,000 rpm;
• milling depth - 4.0 cm;
• collet dimensions - 6 mm;
• functionality - engine cooling;
• device weight - 1.5 kg.

Advantages

• ease of use in general;
• reliability of design;
• decent equipment;
• possibility of working with one hand.

Flaws

• fragile plastic sole;
• limited selection of cutters;
• poor functionality.

BOSCH GKF 550 Professional, 550 W

The BOSCH GKF 550 Professional network edge router, equipped with a 550 W motor and weighing only 1.4 kg, is a convenient solution for efficient and precise processing of all kinds of materials.

The device is equipped with a parallel stop, a cutting depth limiter, and a roller guide.

The design of the router provides a protective wall.

The unit provides rotation speeds of up to 33 thousand revolutions per minute. The diameter of the collet chuck is 6 mm.

The product is equipped with a parallel stop, a copy sleeve, a roller guide, and 10 and 17 mm wrenches.

Specifications:

• power consumption - 0.55 kW;
• maximum speed - 33,000 rpm;
• milling depth - 4.1 cm;
• collet dimensions - 6 mm;
• functionality - parallel stop, copying sleeve;
• device weight - 1.4 kg.

Advantages

• light weight;
• compactness;
• high engine speeds;
• affordable price.

Flaws

• basic functionality;
• lack of protection against accidental activation;
• no cutters included.

Design and functionality

An edge miller is a highly specialized piece of equipment. Most often it can be found in the hands of a furniture maker who processes parts and elements, bringing them to the desired shape and characteristics.

An edge router (other names are an edging router or trimmer) has a vertical structure. The cylindrical housing contains an electric motor connected to a special cartridge holder for equipment. The working part makes translational movements in a special frame, which, with the help of adjustments, limits the stroke of the cutter.

Advanced professional routers come with a set of frames or one frame with wide functionality. It may have a slope, special stops and other elements that facilitate the performance of complex work.

Using an edge router, you can chamfer the workpiece, make grooves and grooves of the desired profile, make recesses for hinges and various inserts. Obtaining a figured edge of any configuration is possible thanks to the use of special equipment.

Review of the best cordless edge routers

Battery models provide the ability to work away from an outlet, as part of field activities.

The best cordless routers give you complete freedom of action.

BOSCH GKF 12V-8 2×3.0Ah L-Boxx

The BOSCH GKF 12V-8 cordless router is a powerful solution that operates at a maximum speed of 13 thousand rpm, which will allow you to perform precise milling to a depth of up to 3.6 cm.

The equipment supports work with an 8 mm collet, weighs only 1.1 kg and has dimensions of 8x25x14.5 cm.

The device is powered by a Li-Ion battery with a capacity of 3 Ah. The battery produces a working 12 volt output.

The product is equipped with two batteries, a pulse charger, a collet, and an open-end wrench.

The set comes in a convenient and ergonomic plastic case.

Specifications:

• battery - 2x12 V/3 Ah/Li-Ion;
• maximum speed - 13000 rpm;
• milling depth - 3.6 cm;
• collet dimensions - 8 mm;
• functionality - fine adjustment, spindle lock;
• device weight - 1.1 kg.

Advantages

• ease of use;
• autonomy;
• compact dimensions;
• two batteries included.

Flaws

• rapid battery discharge;
• low power;
• inflated price tag.

Makita DRT50ZJX2

The powerful Makita DRT50ZJX2 cordless milling cutter, equipped with an ergonomic compact body and powerful hardware, will allow you to work autonomously with maximum comfort in any conditions.

The product is powered by a Li-Ion battery with a voltage of 18 V.

The item is not included in the delivery set and must be purchased separately.

The milling cutter is equipped with a speed regulator with a range of 10,000-30,000 rpm, a rotation stabilization system, and ergonomic handles that ensure reliable holding of the tool.

The device is complemented by backlighting, a soft start system and other options.

The router is equipped with a plunge and inclined base, a straight guide, a branch pipe for a vacuum cleaner, a parallel stop, and a mounting key. The set comes in a Mak Pac case.

Specifications:

• battery - 18 V (purchased separately);
• maximum speed - 30,000 rpm;
• milling depth - 4.0 cm;
• collet sizes - 6 mm, 8 mm;
• functionality - speed control, rotation stabilization, soft start, turret stop, fine tuning, spindle lock, vacuum cleaner connection, backlight;
• device weight - 2.1 kg.

Advantages

• possibility of working with one hand;
• high speed;
• mobility;
• brushless motor on board;
• convenient lighting.

Flaws

• lack of battery and charger;
• Inconvenient organizer included.

RYOBI R18TR-0

The RYOBI R18TR-0 cordless edge router is a portable device that allows you to perform wood milling work with high precision.

The presented tool is powered by a lithium-ion battery with a voltage of 18 volts.

Recommended battery capacity is 5 Ah. The battery is not included and must be purchased separately.

The milling cutter is equipped with a powerful electric motor, a 6-6.35 mm collet chuck, a micro-height adjustment system, and a smooth speed control unit.

The device is complemented by LED illumination of the working area and a transparent base. The product is equipped with a parallel stop, collets, a milling cutter, and a key.

Specifications:

• battery - 18 V (purchased separately);
• maximum speed - 29,000 rpm;
• milling depth - 3.8 cm;
• collet sizes - 6 mm, 6.35 mm;
• functionality - fine tuning, spindle lock, backlight;
• device weight - 1.3 kg.

Advantages

• high-quality assembly;
• good immersion depth of the cutter;
• convenient transparent base;
• autonomy.

Flaws

• lack of battery and charger included;
• does not support common 8 mm cutters;
• inconvenient location of the switch.

DeWALT DWE 6005

The model is entirely made of polycarbonate, and the cost is comparable to Bosch (RUB 14,000). A proprietary DeWALT adjustment system is provided, where the cutter itself is placed on the base, and it rises and falls along a spiral groove. In this type of work, the location of the power cord is not thought out, which can get into the most inconvenient place.

Users often choose this model for a number of advantages:

• low noise level - up to 77 dB;
• quite powerful motor of 600 W;
• productivity – 34 thousand rpm;
• comfortable grip.

However, the high cost and small cutting depth (up to 2.2 cm) often becomes the reason for purchasing a more modern model.

DEWALT DW670

The model, which has an attractive price of 7 thousand rubles, belongs to the class of professional equipment with additional functions. High performance with average motor power (600W) is one of the distinctive features of this manufacturer of construction tools.

The following advantages encourage the purchase of such a router:

• the maximum stroke reaches 5.5 cm;
• productivity – 30 thousand revolutions per minute;
• collet from 6 to 8 mm;
• copes well with engraving, design of chamfers and profile ends.

The model is quite heavy (1.9 kg), which makes it impossible to work with one hand for a long time.