TOP 10 wood blades for grinders: ranking of the best models of 2022

A saw blade for an angle grinder, equipped with a cutting edge with teeth, can be used when working with wood and wood-based materials.

This type of wheel for an angle grinder is capable of providing an even and clean cut of boards, plywood, parquet, laminate, fiberboard and chipboard.

In this review, we will consider the best models of saw blades for angle grinders, and will dwell on the criteria for choosing equipment of this type.

Page navigation:

What to look for when choosing a saw blade for wood?

The key features that you should pay attention to when choosing a saw blade for an angle grinder are the following:

External diameter of the equipment. The size of the wheel largely depends on the power of the angle grinder and the type of work being carried out. 12.5 cm discs are considered the most suitable for wood. A larger diameter increases productivity, but requires professionalism and increased safety measures.
Internal (landing) diameter. For angle grinders it is standard - 22 mm. Otherwise, the disks can be installed through special adapter rings. Some equipment models may be equipped with this accessory.
Disk type. Monolithic equipment is characterized by low cost, but requires periodic setting of teeth and sharpening. More durable carbide blades require little maintenance and provide clean cuts at any speed.
Number of teeth. Cross cutting requires the use of discs with a large number of cutters - 60-90. Accordingly, longitudinal cuts are obtained better when using models with a small number of teeth.
Rotational speed. High speed blades are suitable for working with dense and hard wood. The low-speed attachment is ideal for soft and sticky wood.

Where can I buy

The sale of attachments for angle grinders is carried out by companies that provide spare parts and consumables, the contact details of which are presented here. In addition, cord brushes can be found in the range of companies offering angle grinders. Their contacts are presented in the corresponding section of our website.

Sections: What you need for an angle grinder

Previous article: Forging operations Next article: Metal brushes for an angle grinder

The best 125 mm wheels

Small-diameter equipment will do an excellent job with thin wood. 12.5 cm discs are recommended for use with corded and cordless angle grinders of compact sizes.

Rating of the TOP 5 discs for 125 mm wood grinders based on customer reviews and ratings.

Sparta 732395 125x22 mm

The Sparta 732395 saw blade, made of special alloys, is equipped with teeth with a carefully selected sharpening angle, allowing high-quality and highly productive work on sawing wood.

The model is equipped with compensation slots that reduce vibrations, suppress noise, and prevent element deformation during intensive work.

The outer diameter of the disc is 12.5 cm, the inner diameter is 2.2 cm.

The kit includes adapter rings that allow you to use the equipment with tools having different mounting diameters.

Specifications:

outer diameter - 12.5 cm;
landing size - 22 mm;
number of teeth - 36;
speed - 10000 rpm;
disc type - carbide;
processing material - wood.

Advantages

clean cut;
acceptable price;
quality of execution;
precise fit on the grinder.

Flaws

heating at high speeds;
not a deep cut.

TUNDRA 1032324 125x32 mm

The saw blade for the grinder TUNDRA 1032324 will provide high-quality sawing of wood thanks to a special sharpening scheme for carbide teeth.

The model is equipped with compensation slots to reduce vibrations, suppress noise and ensure that the equipment does not deform as a result of heating under intense load.

The package includes additional adapters (rings for 20/32 and 16/32) for angle grinders with the corresponding mounting diameters.

The device provides a clean type of cut.

Specifications:

outer diameter - 12.5 cm;
landing size - 32 mm;
number of teeth - 36;
speed - 7000 rpm;
disc type - carbide;
processing material - wood.

Advantages

Ease of use;
safety;
clean cut;
democratic price tag.

Flaws

not suitable for high speeds;
Not the best packaging quality.

VIRA RAGE 125 mm

The VIRA RAGE saw blade is an ideal solution for cutting, profiling, cleaning and performing other work on any type of wood and its derivatives using an angle grinder.

The outer diameter of the device is 12.5 cm, the inner diameter is 2.2 cm. The cutting thickness is 3.8 mm.

The design of the equipment guarantees minimal impact when used with an angle grinder and eliminates severe deformation as a result of heating during long-term intensive work with hardwood.

Specifications:

outer diameter - 12.5 cm;
landing size - 22.23 mm;
number of teeth - 3;
speed - 12200 rpm;
disc type - carbide;
processing material - wood.

Advantages

easy move;
no beats;
affordable price;
sharp edge.

Flaws

quite rough cut;
not the highest accuracy;
heating at high speeds.

STAYER Woodcut 36854-125 125x22.2 mm

The STAYER Woodcut 36854-125 saw blade is a productive and safe accessory suitable for a variety of tasks with perfect results.

The model will provide a clean and accurate cut.

The disc is compatible with the STAYER angle grinder; in addition to sawing, it can be used for cross cutting of material.

The special geometry of the cutting elements made of hardened steel allows you to work with wood and plastic.

The equipment guarantees a maximum linear speed of 80 m/s and no deformation due to heating.

Specifications:

outer diameter - 12.5 cm;
landing size - 22.2 mm;
number of teeth - 3;
speed - 12250 rpm;
disc type - carbide;
processing material - wood, plastic.

Advantages

high-quality cut;
absence of noise and beats;
versatility of use;
high-quality performance.

Flaws

small depth of cut;
low productivity;
heating at high speed.

Sturm! 9020-125-22-36T 125x22.2 mm

Model Sturm! 9020-125-22-36T is a replacement saw blade for longitudinal and cross cutting of soft and hard wood, plywood, chipboard, laminate and other materials.

The equipment is produced using high-tech equipment.

Its base is made of carbon steel, the cutting part is reinforced with carbide plates.

The landing diameter of the model is 2.2 cm, the outer size is 12.5 cm.

The special shape of the teeth makes it possible to perform both longitudinal and transverse cuts with high precision.

Specifications:

outer diameter - 12.5 cm;
landing size - 22.2 mm;
number of teeth - 36;
speed - 9000 rpm;
disc type - carbide;
processing material - wood, laminate, plate.

Advantages

high-quality cut;
affordable price tag;
easy move;
no vibration.

Flaws

shallow cut;
heating at high speeds;
noisy model.

Wood sanding attachments

For wood processing, in addition to cutting wheels, there are attachments specially designed for installation on angle grinders, with which you can peel, grind, brush and mill wooden surfaces.

Peeling attachments

If you need to remove a layer of paint or other coating from a wooden surface, you can install a sanding attachment on the grinder. There are a large number of different attachments for grinding work available on the market. They differ in shape, design, and types of work that can be performed with this tool.

The photo below shows disk attachments with spikes or chips, with which you can easily remove the top layer of wood, grind down the end of the board, etc.

The next cutter, due to the fact that the tenons on it are located on a flat plane, allows you to level various wooden surfaces. For example, if 2 boards on the floor at the end joint are at different heights. Using this attachment, the defect is easily eliminated, and the boards are joined in the same plane.

There are also stripping attachments made of twisted wire. They can be made in the form of a metal cup with a wire inserted into it.

Or in the form of a disk with turns of wire clamped in its central part.

These brushes are used if you need to quickly remove old paint from a wooden surface or rust and paint from metal.

The next photo shows a brush with a smaller diameter wire, and it is used for finer roughing work on wood and metal.

In addition to cleaning, this brush is often used for brushing wood, that is, giving it an aging effect. If this effect needs to be used on large surfaces, in the professional field, then for brushing it is better to use special hand-held machines with wide brushes.

Grinding and polishing attachments

For grinding various surfaces, including wood, there is a special attachment for angle grinders on sale, consisting of a metal base, onto which an emery grinding wheel is attached with Velcro. The attachment is screwed onto the angle grinder shaft and tightened with an open-end wrench.

It is often equipped with an adapter for mounting in a drill chuck or drilling machine.

A grinding wheel is not used for polishing surfaces. Instead, felt discs are installed on the nozzle, which are secured with Velcro.

A flap sanding wheel is also often used for sanding wooden surfaces. It is called so because it consists of many petals fixed on its plane, made of sandpaper. The grain size of the latter can be selected based on the requirements for the surface being processed. For rough sanding, coarse-grain sandpaper is suitable, and for finishing sanding, vice versa.

The better way to sand wood - with a grinder or a sander - depends on what you are going to prepare the wooden surface for . If you are applying regular paint, you can use a grinding wheel. If for varnishing, then a grinding wheel mounted on an angle grinder cannot be used, since it will produce small radial scratches on the surface of the wood, which will clearly appear after applying the varnish. In this case, for grinding, use a longitudinal belt sander (the sanding belt moves longitudinally) or a vibration sander, where the same sanding wheels are used.

Flat Blade Disc

A disc with several blades protruding from the side can be considered as an alternative to a plane. It is intended primarily for removing material on a plane. This attachment is indispensable when logging; it allows you to very quickly and efficiently remove bark from unedged boards or logs. It is also convenient to process convex or form concave surfaces.

Doing such work with a plane is very difficult and time consuming. In addition to its obvious usefulness, the disk made of high-quality steel has a good service life. And dull blades can be sharpened without the use of special tools.

Cutting end discs

End discs, which are also called cutting, milling, sawing, offer processing of material with a normal load character for an angle grinder. That is, the nozzle rotates in the same way as an abrasive wheel, with the same directions of emerging forces and the mechanics of tool control.

These discs have a very important feature for beginners. The radial speed of the cutting edges is high. Therefore, when cutting grooves and sawing material, sudden load surges are possible. For example, due to its uneven density. The grinder can be torn out of your hands; there are cases where the disc is displaced with a blow due to a change in the nature and area of treatment. However, in the hands of a master, this relatively dangerous class of cutting discs allows you to perform many operations.

Wheeled. It is made in the form of a separate product or an attachment to a regular abrasive. It has a flat end with teeth. The attachment is used both for milling grooves and for grinding their bottom and edges.
Serrated studded. It is made in the format of a saw blade with teeth, has one row of protrusions on their side parts. The nozzle is designed to form a shallow groove. Side teeth prevent deformation and reduce the risk of strong jerks during operation. They also allow the craftsman to move perpendicular to the groove line, widening it.
Toothed plane. The difference from the previous product is that the teeth are located on almost the entire lateral plane of the nozzle. The attachment can be used when processing a flat surface, forming rectangular grooves of considerable depth, and cutting thick workpieces.

It is simply impossible to list all the types of attachments, adapters and devices that can be installed on the angle grinder shaft. They allow you to significantly increase the functionality of your angle grinder. Having one tool in the workshop, the master can easily perform a large number of operations. It is not surprising that discs and attachments for angle grinders are very popular and more and more new options for devices are being developed.

The best wheels with a diameter of 260-310 mm

Large-diameter equipment is suitable for sawing large boards, panels and timber. Recommended for use with powerful professional tools with reliable protection.

Makita Standard B-29234 260x30 mm

High-quality equipment for the Makita Standart B-29234 grinder will provide a clean and accurate cut when sawing hard and soft wood, as well as derivatives of this material.

The model is equipped with 40 teeth made of hardened steel, the seat size of the disc is 3 cm, the outer diameter is 26 cm.

The presented saw blade is recommended for use with professional angle grinders.

The device allows you to perform work at speeds up to 5870 rpm.

The equipment is supplied in high-quality and ergonomic packaging.

Specifications:

outer diameter - 26 cm;
landing size - 30 mm;
number of teeth - 40;
speed - 5870 rpm;
disc type - carbide;
processing material - wood.

Advantages

affordable price;
holds the angle well;
clean cut;
no beats.

Flaws

does not work well with hard materials;
the paint wears off quickly.

Makita Standard B-29290 305x30 mm

The Makita Standart B-29290 model, made of carbide materials, will allow you to produce precise and clean cuts when working with boards, planks, baseboards and other elements during finishing and construction.

The equipment is characterized by a long service life, a special ATB tooth shape, and a hardened blade with 80 teeth.

The disc, with its own thickness of 1.8 mm, allows cutting up to 2.3 mm.

Recommended for use with corded and cordless angle grinders with a 3 cm diameter mounting hole.

Specifications:

outer diameter - 30.5 cm;
landing size - 30 mm;
number of teeth - 80;
speed - 5000 rpm;
disc type - carbide;
processing material - wood.

Advantages

high-quality cut;
large diameter;
no beats;
convenient packaging.

Flaws

high price;
not suitable for high speeds;
noisy model.

BISON Expert 36907-305-30-100 305x30 mm

Saw blade BISON Expert 36907-305-30-100 with trapezoidal teeth and a negative angle of inclination is suitable for precise longitudinal and transverse cutting of wood, aluminum, laminate and plastic.

The teeth in this model are reinforced with plates made of hard-alloy tungsten carbide materials (VK8), provided with automatic three-sided sharpening with grinding of each element for ideal geometry.

The equipment, with its own thickness of 2 mm, makes it possible to make cuts with a width of 2.8 mm.

The maximum speed of the model is 5000 rpm.

Specifications:

outer diameter - 30.5 cm;
landing size - 30 mm;
number of teeth - 100;
speed - 5000 rpm;
disc type - carbide;
processing material - wood, plastic, metal.

Advantages

works with a wide range of materials;
gives a clean and even cut;
perfect workmanship;
high performance.
Advantage;

Flaws

not an affordable price tag;
there are vibrations;
heavy weight.
Flaw;

DeWALT Extreme DT4260-QZ 305x30 mm

The high-quality carbide saw blade DeWALT Extreme DT4260-QZ will provide accurate cuts when working with plywood, veneer, soft and hard wood.

The presented equipment is also suitable for cutting soft non-ferrous metals.

The model can be used with corded and cordless angle grinders with a 3 cm mounting hole.

With its own thickness of 1.8 mm, the element provides a cut of 2.6 mm.

The equipment has improved balancing, which prevents bending and vibration and provides increased cutting accuracy.

Specifications:

outer diameter - 30.5 cm;
landing size - 30 mm;
number of teeth - 60;
speed - 5800 rpm;
disc type - carbide;
processing material - wood.

Advantages

high-quality execution;
renowned manufacturer;
clean and even cut;
excellent tooth sharpening.

Flaws

non-critical beats;
heavy weight;
high price.

CMT 294.060.11M 260x30 mm

Saw blade CMT 294.060.11M, suitable for use with angle grinders, is an ideal solution for cutting soft and hard wood, plywood, veneer, and various panel materials.

The model guarantees clean and precise longitudinal and cross cutting.

The equipment is compatible with corded and cordless angle grinders with a 3 cm mounting hole.

The thickness of the disc is 1.8 mm, the cutting width is 2.5 mm.

The model maintains a maximum speed of 7300 rpm, weighs 1900 g, and has slots that reduce vibration and noise.

Specifications: