Egoza Barbed Wire Installation Instructions

Do-it-yourself installation of Egoza barbed wire is done in stages. This option has a number of advantages and disadvantages of use. Egoza prickly fabric is divided into several types. Each of them has its own distinctive features.

Before proceeding with the installation of the Egoza fence, you need to select brackets for attaching the spiral. Each type is selected for a specific barbed tape.

Attaching wire fencing

Advantages and disadvantages of barbed wire

There are a number of advantages of using:

it has a long service life - more than 20 years;
Egoza razor tape has high strength indicators;
it is resistant to corrosion phenomena if made in accordance with GOST standards;
it can be used in different ways: either a flat, or spiral, or a fence installed on the ground is made;
the protective material will allow sunlight to enter the area, which makes it possible to grow various garden crops;
many consumers are attracted by the Egoza prickly spiral, its price is low;
There is nothing difficult in installing the prickly cloth; even a beginner can cope with the job;
it has high protection rates; strangers will not enter private territory;
The material looks dangerous and frightening. You can enhance the protection using current; it is passed directly through the tape. But in this case there must be a warning. The manufacturer's website contains a price list.

Diagram of the main dimensions of AKL 20 But there are a number of disadvantages:

Behind such a fence you cannot hide from the curious glances of your neighbors, with the exception of a concrete fence with a barbed spiral on top.
The material is not a decorative decoration; its appearance will not attract attention, but, on the contrary, will scare away.

Types of Egoza razor tape

It is divided into several types, and each of them has its own distinctive features:

AKL is a reinforced version; it is made of durable galvanized steel. It is crimped around the entire perimeter with a steel tape with sharp edges. Previously, production simply made sharpened coils, and then they were changed to tape. These sharp edges can seriously injure someone who tries to enter private property. This option is used when installing a flat fence made of Egoza barbed wire.
ASKL is a twisted type, made of the same material as the previous type. The cutting spiral is twisted in production using galvanized rigid wire. The blades can be directed in different directions. This option is distinguished by its effectiveness and intimidating appearance. ASKL is used for installation on an already finished fence.
Spiral view is a volumetric version that is a spiral. In its production, tapes of the previous types are used. Such a fence will be difficult for an attacker to overcome. Even if it is bitten in several places, it will still cause serious injuries. This type is needed to make a barrier directly on the ground.
PBB is a flat type, it is somewhat similar to the spiral version, but it is more neat in appearance.

Egoza barbed wire has the same protective functions as other varieties.

The photo shows a fence with a “thorn”.

Final view of the fixed protective device

Which is better: heated floors or radiators?

Warm floorBatteries

Fidget installation instructions

To install fidget you need:

Instructions for installing the fidget are available in this video

Frequently asked questions: How much does it cost to install fidget? How much does it cost to install a prickly fidget on a fence or gardening? Let's try to partially answer.

For estimators. On one of the forums I saw a recommendation: take the E7-24-13 price, find the price for installing reinforced concrete fence posts and subtract it from the E7-24-13 price. The price for installing the fidget will remain.

The cost of installing a fidget depends on what fence it will be installed on, what method, at what height, and how far away the installation site is. In the case of installation of fidget in Kiev, Lvov and other cities that are located far from Zaporozhye, we can send a team of fidget installers on a business trip or offer installation of fidget to our partners who install fidget in these cities. We do not recommend searching the Internet for information using the search words fidget installation instructions , fidget installation instructions . We found that no one gives clear instructions for installing Egoza, but the search results contain many pages containing viruses. The presence of a security system on your computer, in the form of an antivirus and other applications, does not guarantee your security 100%. Therefore, it is better to come to terms with the idea that fidget installers are reluctant to share their production secrets, and you should get used to the idea that fidget installation needs to be ordered from specialized companies and let them earn money or install fidget on their own , having previously traveled around and seen how fidget is installed at others.

Pay special attention to safety precautions. Injuries from fidget installation can be serious. After all, it was precisely so that the attacker would be afraid of getting seriously injured that you decided to buy a fidget . The photo shows the Cossack fidget and the hand of our employee.

The installation scheme (installation of the fidget) is quite simple: it can be installed directly on the ground, for this it is pinned with special mounting brackets. You can install prickly fidget in one or several rows. You can install the fidget on the very ground in front of the fence. Most barbed spiral barriers are installed on top of fences; concrete fences, brick fences, wire fencing systems, for example TM Betafence, Kazachka. To install fidget barbed wire you need: a bracket for fidget , anchor bolts, two or more guide galvanized wires or barbed wires, the fidget itself, mounting brackets, special tools, pliers for clamping staples, good specialists. Do you want good fidget installation specialists? Call us and we will send a team of fidget installers to your site.

Different ways to install the fidget are shown in the video and diagrams below.

When installing fidget, buyers have questions: we buy fidget 450/3 with 86 turns with a stretch of 21.5 meters, but it stretches at most 18 meters. Why? Answer: the reason is the installation technology. Look at the photo where this fidget 450/3 is stretched to 21.5 meters and the video where it is stretched to 21.5 meters and 18 meters.

But in order to stretch the fidget 450/3 to the maximum distance, it must be stretched in stages. For example, 12 turns per 3 meters. In this case, the distance between adjacent turns should be 0.5 m.

Options for wire fastening brackets

They are divided into the following types:

Straight - such a bracket is needed to fix a spiral, which must be installed in several rows, or a spiral fence is being installed. If there is not enough material, then it is possible to use it only for the upper part of the pillars, which are used as support.
L-shaped - this type is used when installing protective wire in 2-3 rows. The bracket has tension lines and must be placed on the inside or outside of the fence. A spiral tape is also attached to it.
Y-shaped, it is needed for installing a volumetric spiral or installing a sharp spiral in 2-3 rows.
Semicircular - this type is chosen if the tape is installed on a slope or directly on the ground. It is convenient to use for fastening a spiral barrier.

Diagram of a classic V-bracket

Tips for choosing

When choosing the right Egoza barbed wire, it is important to understand exactly what requirements apply to the fence. The products manufactured in accordance with GOST 285-69 are a classic version with a main wire of round cross-section and spikes protruding outward. It is stretched exclusively in the horizontal plane and is easily cut with ordinary tools. This type can be considered solely as a temporary fence.

Tape ACL and ASCL are more reliable and damage-resistant options. When tensioned, such fences also turn out to be only horizontal; they are more often used in everyday life or installed along the perimeter of roofs, at the top of concrete or metal fences.

At facilities that require an increased level of protection, spiral or flat barriers are installed.

They fully meet the expectations, look neutral, and provide maximum safety.

When using a volumetric security guard, the level of protection increases; getting out of such a structure if you get into it turns out to be almost impossible, which is important for sensitive objects.

Installation of razor tape: step-by-step instructions

Installation of an Egoza fence:

The area is marked for installation of poles. Metal supports are being installed on a concrete base. First you need to dig holes, the depth of which will be 0.6–0.8 m. The distance between them should be 2.5 m. They can simply be driven into the ground, but it is best to concrete them. To do this, a layer of sand and crushed stone is made at the bottom. The cement mortar is prepared, the support is installed and concreted. It is recommended to make supports for the outer pillars, since they can become deformed due to the tension force.
It is necessary to weld special metal eyes along the entire length of the fence. They are used as fixatives. You need to ensure that the distance between them is 10–20 cm.
You need to tighten the wire while simultaneously forming rows of it. The sharp tape is attached to the eyes using special brackets. To make the fabric more dense, it is necessary to fix the tape crosswise.
If you need to strengthen the protective functions of the fence, it is recommended to apply tension along the entire length of the fence. Current can be supplied using a battery, which will have to be charged periodically. After installation, you need to check whether there is voltage in the network.

Installation diagram on a brick fence

Do-it-yourself installation on the fence

The procedure for installing a spiral safety barrier (SSB) along the fence:

A fence is being installed around the entire perimeter of the site. In this case, the wire is fixed directly on the fence.
You need to decide in advance on the choice of brackets for fixing the canvas. They are screwed with anchor bolts or welded to support posts.
Egoza barbed wire is being installed - galvanized wire must be stretched between the installed fasteners. It will serve as the basis for a sharp spiral. To ensure that it is well tensioned, it is recommended to use a winch. If the diameter of the spiral is large, then you need to stretch the wire in several rows.
The SBB is stretched - this is done extremely carefully so as not to cause any damage to yourself.
The Egoza “thorn” is installed using pliers or staples.

5-6 turns of SBB are made per linear meter.

For a diagram of the formation of turns and their joint ties, how to make a fence from barbed wire, read the link.

Installation of fidget on the fence in the estimate

Price for installation of wire fence "Egoza"

In local estimates for the repair of fences at energy facilities of JSC Lenenergo, due to the lack of a direct price, the Contractor for the installation of the Egoza wire fence uses the price TER 07-01-054-13 (installation of metal fences made of barbed wire on reinforced concrete pillars).
This price includes work that is not actually performed, namely: digging holes for foundations or pillars, digging trenches for basement panels with backfilling and compaction, as well as installing pillars in pits with concrete sealing, laying brick linings for pillars. As a result, this significantly increases the cost directly for installing the Egoza wire fence.

In this regard, I ask you to clarify whether it is legal for the Contractor to use the quotation TER 07-01-054-13 for installing the Egoza barrier. If there is another, more acceptable price for determining the cost of performing this type of work, I ask you to give recommendations on its use.

Answer

In response to your request to determine the cost of installation of the Egoza barrier on existing fences, we inform you that the existing collections GESN-2001 and TER -2001 SPb do not contain the necessary standards and prices.

It would be methodologically incorrect to use the price tag TER 07-01-054-13 “Installation of metal fences made of barbed wire on reinforced concrete pillars” (“applied to”) to determine the cost of work on installing the Egoza fence, since the specified price includes a set of work operations and the composition of the material resources used does not correspond to the costs required for the construction of the Egoza fence.

Taking into account the need for correct cost assessment, the St. Petersburg Regional Center for Pricing in Construction has developed standards and prices for the installation of a single-level spiral safety barrier (SSB) of the “Egoza” type for installed fences made of brick, reinforced concrete, metal and wood. The developed standards and prices will be published in one of the next issues of the All-Russian information and analytical magazine “Pricing and estimate regulation in construction.”

Fidget installation instructions - Fidget installation diagram

To install fidget you need:

buy fidget;

buy brackets for installing fidget;

buy tension wire;

buy brackets for mounting fidget;

Instructions for installing the fidget are available in this video

Frequently asked questions: How much does it cost to install fidget? How much does it cost to install a prickly fidget on a fence or gardening? Let's try to partially answer.

Different ways to install the fidget are shown in the video and diagrams below.

Practical results of fidget installation

Option 1

Option 2

Carrying out work on the installation of Egoza-type barbed wire along the existing fence made of profiled sheets, strengthening the entrance gates and installing a barrier at the address: Ryazan, st. Chkalova, 26 a

Participants and results

state government institution of the Ryazan region "Temporary detention center for foreign citizens and stateless persons subject to deportation or administrative expulsion from the Russian Federation"

Start: from the moment of conclusion of the Contract End: June 28, 2013.

Russian Federation, 390029, Ryazan region, Ryazan, st. Chkalova, 26a, -

Term and terms of payment

Payment is made by the State Customer in a one-time payment by transferring funds to the Contractor's bank account specified in this contract, on the basis of a Certificate of the cost of work performed and expenses in Form 3 (Form KS-3) with a breakdown of physical volumes in Form 2 “Acceptance Certificate of Completed Work” works" (Form KS-2), verified by the construction pricing department of the Main Directorate of Architecture and Urban Planning of the Ryazan Region. The calculation is made according to the actual volume of work performed by the Contractor within 10 banking days after acceptance of the result of the work performed.

Source of order financing

regional budget of the Ryazan region.

Initial price and security for the customer Initial contract price Volume for the customer

The work is carried out in accordance with the estimate. The quality of the work performed must comply with the requirements of SNiP. The quality of the materials used must comply with GOST requirements.

Installation of barbed wire

Barbed wire is the simplest and most effective way to protect an area from intrusion by intruders. Installation of barbed wire can be carried out on any type of fence, from chain-link mesh to beautiful brick fences enclosing an elite cottage. If you decide to use barbed wire as a fence, you should pay attention to the fence of the Egoza variety.

It is a barbed reinforced tape, often twisted into a voluminous spiral.

An example of mounted barbed wire on a corrugated fence

Installation of metal and plastic fencing

The manufacture and installation of stainless steel and plastic fencing, as well as fences of any type, is a complex process, the implementation of which must be based on regulatory and design documentation.

In this case, depending on the functions performed, the material, type, as well as installation methods or features are determined. For example, to ensure the safety of work, inventory fences of the installation horizon are used.

In the photo - installation of a metal fence

Installation of metal fences

Installation and assembly of metal enclosing structures consists of preparatory work and direct assembly of sections. In this regard, 5 main stages can be distinguished .

Site preparation - allocation of territory, designation of places where underground communications are laid, dismantling of buildings located on the site of the future fence.
Carrying out earthworks - marking the location of the future fence, digging a trench in the case of installing a fence structure on a foundation, or drilling holes for posts.
Installation of supports for the fence - pouring the foundation and installing the posts on which the frames will be attached.
Installation of spans - fastening fence sections to support posts.
Installation of gates and gates.

Metal fencing of the territory

Note! When installing metal fences on a foundation, it must be taken into account that installation will take several days, since the concrete must harden. Typically this period is 21 days.

If the installation is being done by a contractor, there will often be an estimate to repair the fence if any problems arise.

Stainless steel products

The stainless steel fence is highly resistant to atmospheric influences. Currently, the installation of this type of fencing is the most popular, although the price is higher than that of conventional metal, it guarantees not only the durability and reliability of the structure, but also an excellent appearance.

Beauty and reliability

Installation Features

Do-it-yourself installation of fence sections can be done not only by welding parts, but also by using fastening bolts, in order not to damage the appearance of the product.
There is no need to paint the structure after installation, since this material does not corrode.
It can be mounted either on a concrete pad or without it.
Installation of a sectional stainless steel fence can be carried out during the day.

Installation Tips

During the installation process, it is important to adhere to the basic provisions that will ensure the quality and correct installation of the fence.

To do this you need:

The installation of the fence should begin from the gate or wicket.
If there is no concrete pad, it is necessary to leave a gap between the bottom of the fence and the ground - a guarantee of protecting the structure from corrosion.
After installing each section or opening, check that it is fastened correctly and that there are no vibrations due to gusts of wind.
Upon completion of all work, carry out quality control.

When all stages of installation work on installing fences are carried out consistently and accurately, an excellent result is guaranteed.

Features of fencing construction

Constant updating of the building materials market allows for the production of increasingly better and more practical products. Fences and railings occupy a special place among the wide variety.

Convenient plastic fencing

Plastic fencing

One type of modern innovation is plastic fences. They are made from PVC boards and other components, so you can repair this type of fence yourself.

The advantages of plastic fences include:

resistance to rodents and insects;
does not require additional care;
long service life, wear resistance;
ease of installation and practicality in operation;
Made from safe material and does not contain harmful substances.

The installation process of plastic fencing is very simple. It takes place in the form of collecting individual parts of the designer. This installation method allows you to adjust the distance between the supporting elements, and it is also possible to fit perfectly into the terrain of the site, repeating all its contours.

Tip: Also, such fences are much easier to repair if damaged. To do this, you do not need to replace the entire span, but only replace the damaged board.

Egoza fencing

Egoza barbed wire is a reliable way to protect the territory from uninvited guests. It is presented in the form of a spiral or flat barrier.

The advantages of such fences are:

the strength of the metal wires is not subject to corrosion or damage;
quick installation if you have the necessary knowledge;
does not require additional maintenance;
low cost, ease of transportation;
high degree of efficiency;
multifunctionality.

Note! Egoza fences are installed on top of another fence. When installing Egoza fencing, workers must have special thick clothing and leather gloves with wrist protection.

The tools you will need are a welding machine, a grinder, pliers for staples, a hammer, a level, a tape measure, a winch for tensioning the wire, and you will also need a ladder. The most important thing when performing installation is accuracy.

Tips for choosing and installing fencing

Before you start purchasing and installing fences, you should decide on the purpose of the fences:

either beautiful;
either safe;
or practical.

After choosing the type, you need to correctly calculate the required number of sheets or mesh duration. Then you should prepare all the necessary tools. All actions and sequence must be performed calmly, carefully, with maximum precision, and then the fruit of your diligence will be magnificent.

Conclusion

Various fencing options can significantly expand the functionality of certain areas, as the video in this article confirms. Thanks to them, it becomes possible to make the territory, for example, protected from external interference or to give it the desired flavor.

Pros and cons of barbed wire

Barbed wire has its advantages and disadvantages. Among the positive qualities we can note:

Reliability and durability. Made in accordance with GOST, the reinforced tape has high strength and corrosion resistance. The service life of Egoza fencing is up to 20 years;

Option for installing a barb on a stone fence The advantages of barbed wire, when viewed differently, can be classified as disadvantages:

The transparency of such a fence will not protect against prying eyes (of course, if Egoza is not installed on top of a high concrete fence);
When choosing a wire fence, you need to understand that it is unlikely to serve as a decoration for the site and speak about the good taste of the owner.

Return to contents

Description of Egoza barbed wire and the secrets of its installation

Egoza barbed wire has long occupied a leading position in the domestic market for lightweight light-transmitting fencing. The plant is located in Chelyabinsk, one of the metallurgical capitals of the country, so there is no doubt about the quality of the products. But the available types of wire, material characteristics, and installation instructions are worth studying in more detail.

Varieties of Egoza razor tape

AKL (reinforced razor tape) is a galvanized steel wire around which a tape with cutting blades is crimped. AKL is an improved type of “barb” of the old type: instead of pointed turns, a cutting tape stamped from sheet steel is used. Its razor-sharp edges can cause serious damage to a border violator.
ASKL (reinforced twisted razor tape) - stamped cutting tape is twisted around rigid galvanized wire. The blades have different directions - the effectiveness and intimidating appearance of the fence increases.
SSB (spiral safety barrier) is a three-dimensional structure made in the form of a spiral. To create it, tapes from ACL or ASCL are used. A barbed spiral fence is difficult to overcome. Even after several snacks, the SBB continues to be a serious obstacle for violators.
PBB (flat safety barrier) is a flat design in the form of spirals, similar to SBB, only the PBB does not protrude beyond the fence and looks quite neat and not so menacing. Although this does not in any way reduce the protective functions of the fence.

Types of brackets for fastening Egoza wire

Depending on the type of fence and the type of Egoza, various fastenings and brackets made of steel are used. With their help, the installation of a barbed fence is greatly simplified. Fastening to support posts is carried out using welding or self-tapping screws.

Straight bracket. Designed for fastening wire in several rows and installing spiral barriers. The straight bracket can be replaced by using the top of the support post, which should extend above the fence;

This is what a straight bracket for mounting barbed wire looks like

Peculiarities

Egoza barbed wire is a type of security fencing produced by the brand of the same name. The Chelyabinsk plant where it is produced is part of the group. Among his clients are government agencies, nuclear, thermal, electric power facilities, the Ministry of Internal Affairs and the Armed Forces of the Russian Federation. When developing wire, specialists from the Egoza perimeter fencing plant take into account the level of responsibility when protecting objects of special importance and the needs of ordinary citizens who want to ensure reliable protection of their areas.

Barbed wire manufactured according to the GOST 285-69 standard is the simplest, suitable only for horizontal tension.

Flat belt structures have more varied technical characteristics. Thus, for Egoza products, a spiral with a five-rivet fastening of the AKL type, the mass of the coil, depending on its diameter, ranges from 4 to 10 kg. The weight of 1 meter is easy to calculate based on the length of the skein - normally it is 15 m.

The manufacturer produces several types of Egoza brand wire. All products have common features: made from steel or galvanized tape, the presence of sharp spikes. All varieties are highly durable and reliable, have a long service life, and can be mounted either around the perimeter of existing fences or independently, supported on poles.

The main purpose of Egoza wire is to protect objects from unauthorized entry. In livestock grazing areas, it is used to prevent or stop the movement of the animal outside the designated area. In industrial, military, secret, protected facilities, in water and environmental protection zones, in places with limited access, barbed wire acts as a protective barrier, allowing it not to block visibility and access to natural light, as is the case with solid fences.

Depending on the type of product, its installation can be carried out in different ways. Most often this wire is used for:

creating fences around the perimeter of the roofs;
fixation on vertical posts (several levels);
installations on supports with a horizontal tension string for 10-15 sections;
laying on the ground (quick deployment).

All these features make barbed wire a popular solution for use on various types of objects.

Installing a barbed wire fence

Installing a thorny fence requires some skill and accuracy.

Installation of barbed wire on a concrete fence

Protective clothing. To install a barbed fence, you will need thick clothing. Particular care must be taken to protect your hands and wrists: razor tape can even cut veins. Thick welding gauntlets are suitable for this purpose;
Brackets and welding machine;
Brackets and mounting pliers for them;
Fidget and steel wire broach.

Stages of installing SBB on the fence

Installation of brackets. A suitable fastening is welded or screwed onto the poles with anchor bolts.
Installation of broach. A simple galvanized or barbed wire is stretched between the brackets, which will serve as a support for the spiral structure and will not allow it to sag. The broach must be pulled tight; for this it is advisable to use some kind of tensioning mechanism, for example, a winch. Depending on the diameter of the spiral, install from one to three rows of wire.
Stretching the SBB. Very carefully the spiral barrier is stretched with the required number of spirals per meter. It is recommended to leave 5-6 turns per linear meter.
Fastening barbed wire. Using staples and pliers, Egoza is attached to the tensioned wire and brackets.

Return to contents