TOP 12 best mini circular saws: 2022 rating by price/quality and which cordless model to choose

Often, professional craftsmen need to carry out a large amount of work in the carpentry industry, so stationary circular saws become the best assistant for them in this matter. But for amateurs who do carpentry infrequently or not on a professional basis, such an expensive device is completely unnecessary, because it is not cheap to maintain and takes up too much space. Thus, home craftsmen usually choose a more optimal option, which is classified in the carpentry community as a “mini-circular saw.” This type of toolkit belongs to the class of hand-held circular saws and is specifically aimed at semi-professional activities. However, it is worth noting that in many technical parameters such devices are not very different from their “older” brothers.

Distinctive properties of miniature saws

Their main purpose is to work with wooden blanks of relatively small dimensions. In particular, they specialize in the following tasks:

• Sawing wood along and across the grain;
• Cutting of any wooden parts, including MDF, laminate/plywood and chipboard;
• Cutting thin and soft metal.

The devices themselves have several main distinctive features:

• Small sizes of units;
• Relatively small weight - up to 2 kilograms;
• Small size of the working disk;
• Limited depth of possible cut.

Based on the above characteristics, the small saw is optimal for operations with soft metal profiles or for using wood of small thickness at home.

TOP 4 best inexpensive mini circular saws

Worx WX527.9 0

Compact and powerful saw is ideal for a variety of work on wood, metal, tiles or plastic.

Effective in solving a wide variety of tasks thanks to adjustable cutting depth and power comparable to more expensive models. Guarantees an accurate and even cut.

The slim body features a rubber coating for a secure grip and control over the saw..

Easy to use both indoors and outdoors thanks to battery operation. It is protected from accidental starting by a switch lock; a spindle lock is provided for safe disk replacement.

There is also built-in protection against deep discharge and overheating, which guarantees long service life of the tool..

The built-in dust collector and the ability to connect a vacuum cleaner will help keep your workspace clean.

Specifications:

• Construction: manual;
• Battery operation: yes;
• Cutting height: 27 mm;
• Disc/bore diameter: 85/15 mm;
• Tilt angle: 45 degrees.

pros

• dust collector;
• power;
• cutting height adjustment.

Minuses

• noisy.

Worx WX527 2.0Ah x1

Convenient, ergonomic saw, complete with battery, ideal for working both indoors and outdoors.

It copes well with a wide variety of work and materials - both wood, plastic or metal.

Equipped with cutting depth adjustment.

The cleanliness of the workplace will be ensured by the built-in dust collector and the ability to connect a vacuum cleaner.

Equipped with protection against accidental activation, spindle lock, protection of the board from discharge and overheating.

The batteries are easily replaced with any similar ones from the brand’s devices.

Specifications:

• Construction: manual;
• Battery operation: yes;
• Cutting height: 27 mm;
• Disc/bore diameter: 85/15 mm;
• Tilt angle: 45 degrees.

pros

• built-in dust collector;
• cutting height adjustment;
• ergonomics;
• reliability.

Minuses

• noisy.

Graphite 58G008

A powerful cordless saw for household use will allow you to work on a wide variety of materials, including metal and tiles.

Allows you to perform longitudinal and transverse, straight and inclined cutting. No additional tools are required to adjust the angle and depth of the cut. Accuracy of work is ensured by the presence of a bright laser marker.

The sole and upper disc guard are made of aluminum alloy, which ensures long tool life.

The model also has a reduced noise level thanks to a well-designed engine and casing.

Specifications:

• Construction: manual;
• Battery operation: yes;
• Cutting height: 48 mm;
• Disc/bore diameter: 150/10 mm;
• Tilt angle: 45 degrees.

pros

• laser marker;
• build quality;
• aluminum base and casing.

Minuses

• rare landing diameter.

RYOBI R18CSP-0

An inexpensive mini-saw for household use is distinguished by Japanese quality and reliability . IN

Among the advantages, users note low weight, optimal dimensions, a comfortable rubberized handle, build quality and housing, thanks to which you can work in any conditions.

Works great on almost any material . Motor braking and spindle lock act as protection.

Battery powered, autonomy lasts an average of 40-60 minutes of operation.

A distinctive feature is the large angle of inclination, but the negative point is the non-standard diameter of the mounting hole - it is difficult to find a replacement disk.

Specifications:

• Construction: manual;
• Battery operation: yes;
• Cutting height: 45 mm;
• Disc/bore diameter: 150/10 mm;
• Tilt angle: 56 degrees.

pros

• reasonable cost;
• build quality;
• large angle of inclination;
• cutting height.

Minuses

• rare landing diameter.

Structural elements

Despite the narrow focus of the described unit, it has a rather complex structure. The main working part in it is a sawing disk with teeth, which is driven by an electric motor. Typically, this element is located on the front of the device. Manufacturers produce a variety of saw blades, the shape of the teeth of which will be specifically designed for a specific task - cutting wood, pressed plates or metal.

In order for the mini-circular to be able to work on hard material, hard alloy soldering is applied to the teeth of its working disk. Therefore, the entire work process occurs many times faster, but the cut line may not turn out to be very smooth.

In order to protect the operator's hands while rotating the saw, the working disk itself is covered with a safety guard. As a rule, the upper part of such a box is securely fixed, but the lower part rises slightly when working on the workpiece.

The electric motor itself is installed in a small housing, which, in fact, is also a handle. Small-sized samples are standardly manufactured in a plastic case and can be equipped with rubber elements (for ease of holding). The motor start button is located on the body itself. For models with increased sizes, the holding handle is located on top, for smaller models it is located behind the body.

The specified placement of the handles allows you to make the entire tool more mobile and maneuverable. Some samples of small saws can be additionally equipped with a support platform, with the help of which the master, without overexerting, calmly holds the device in a canopy, which ensures more stable positioning of the tool during work operations.

Criteria for choosing a mini circular saw

A similar unit can be used both in the garage and inside the apartment. Its functionality is extensive, but before purchasing, attention is paid to the type of work being carried out. Because if you only need to cut wooden pieces, then it is better to pay attention to models with a pipe for connecting a vacuum cleaner. But this is far from the main factor; you should also consider:

• Tool power. When purchasing various equipment that runs on an electric motor, this parameter is considered one of the main ones. The permissible thickness of the processed surface and the ability to work with dense materials, for example, walnut or oak wood, depend on it. After all, the fiber density of such a species is higher than that of aspens, birches, etc. Accordingly, this affects the labor intensity of their cut.
• Number of revolutions. If you do not plan to use the product in the professional field, and all operations are limited to a couple of boards, then it is better to pay attention to models where this indicator is 6000 rpm. per minute
• Possibility of adjusting the disk rotation speed. Most modern instruments are equipped with this option. This parameter is important because cutting wooden elements will require fewer revolutions than when working with metal or stone.
• Minimum and maximum disk diameter. When purchasing a standard model, the optimal value will be 85 mm. You can buy more than this figure, but it’s not a fact that the user will need it. Therefore, there is no point in overpaying.
• The last point is the manufacturer. Mini circular saws are produced by all popular and little-known companies. Therefore, the range of tools is very extensive. Before purchasing a particular model, it is recommended to read customer reviews. They will point out the advantages and disadvantages of the selected equipment.

It is important to remember that under constant load, for example when cutting a large piece of wood, the speed of revolutions will begin to decrease over time. To prevent this from becoming a problem, you should make sure that the tool has an automatic speed control function. The option is popular and is found in many budget and expensive models.

Existing types

Today there is a very wide range of miniature saws on the market. You can choose the most preferable option for any type of proposed work. Therefore, it is necessary to take a closer look at each type of small circulars.

Manual models

They are distinguished by a rather complex structure and design. Typically, this type of device is intended for operations with malleable and thin material:

Using them it is permissible to perform the following operations:

• Cutting metal with a soft structure;
• Cutting of various types of wood (including laminate, chipboard and MDF);
• Sawing wood across and along the grain.

The distinctive features of manual models are considered to be:

• Small dimensions allowing you to easily transport the tool from place to place;
• Relatively light weight - this figure rarely exceeds 2 kg;
• They have low operating power;
• The size of their saw blade itself is also quite small;
• The resulting cut is not too deep.

IMPORTANT! Hand saws are suitable for working with certain materials that have a soft base. A small hand-held circular saw is unlikely to cope with denser materials, especially since an attempt to work with such a tool on it can lead to damage to the device.

Disc models

They are characterized by a complicated design. Again, the main working part will be the sawing disk, designed for processing various materials. Just like in hand saws, the rotation of the disk is started by an electric motor. However, these tools have several distinctive parameters and are equipped with a number of additional functions:

• Variability in adjusting the cutting depth - using a special regulator, it is possible to move the cutting part of the disk below the tool stop.
• Possibility of removing chips/dust - in a number of samples, a special pipe is installed through which you can connect a vacuum cleaner (usually an industrial one), which will automatically suck up chips and remove dust (this option is especially relevant when carrying out large repair work, when it is necessary to prevent dust from settling on surrounding fittings).
• Protection against accidental switching on/off – for this purpose, there are two special buttons on the case, pressing them simultaneously turns the device on/off.
• The permanent operating mode (without interruptions) is a very useful option when it is necessary to perform a very long cut, which obviously requires a lot of time.

Tabletop models

Mini-circular saws can also be made in stationary tabletop versions, however, such samples are not widely used. The reason for this is that the main property of a mini-circular saw should be its mobility and small dimensions, although its functionality is sacrificed. At the same time, if the master has the opportunity to take up a relatively large space for a workbench, then there is no need to choose a small saw - it’s easier to take a full-fledged professional desktop model.

Battery models

Due to the fact that the dimensions of the saws under consideration, in principle, do not provide for the placement of capacious batteries in their cases, they are almost not represented in a number of autonomous devices.

But they still exist, and they are distinguished by their ultra-low power. But they are able to work in places where there is no electrical connection. The absence of a power cord allows you to work at heights, in field conditions, etc. The downside is that cordless saws are not designed for a long period of permanent operation, but the solution will always be to have spare additional batteries. The standard voltage that such batteries support is 18 V. It is worth noting that the battery must be from the manufacturer of the saw itself - universal battery models are practically not found. The same rule applies to the charger. However, some “craftsmen” can remake the charger for a certain brand of batteries, but it is not a fact that the battery in this case will last long.

TOP 4 best powerful mini circular saws

Makita DSS610Z

A very powerful saw for household use at an affordable price, thanks to which the model is very popular among Russian consumers.

The powerful motor spins the equipment up to 3700 rpm. The tool is powered by a lithium-ion battery, but the autonomy due to the high power is small - at maximum load it will not exceed half an hour.

Bonuses include the presence of backlighting, which simplifies work when there is insufficient lighting, and the ability to connect a vacuum cleaner.

The device is protected from accidental activation, has motor braking and spindle locking.

Specifications:

• Construction: manual;
• Battery operation: yes;
• Cutting height: 57 mm;
• Disc/bore diameter: 165/20 mm;
• Tilt angle: 45 degrees.

pros

• quality of assembly and components;
• presence of backlight;
• reliability;
• equipment.

Minuses

• No battery or charger included.

Makita DHS710Z

Excellent powerful saw with a large cutting height. Installation of a cutting disc is allowed

diameter up to 19 cm.

The functionality of the device is expanded by a rotating cutting part with a larger angle compared to analogues.

A powerful motor of our own production is responsible for the high acceleration speed..

Powered by a 4 Ah battery.

Equipped with electronic protection and engine braking, protection against accidental start-up.

It is perfectly balanced, despite its weight, and has thoughtful ergonomics, which ensures ease of use.

Specifications:

• Construction: manual;
• Battery operation: yes;
• Cutting height: 66 mm;
• Disc/bore diameter: 190/30 mm;
• Tilt angle: 50 degrees.

pros

• cutting height;
• balancing;
• ergonomics;
• reliability.

Minuses

• weight;
• price.

BOSCH PKS 18 LI 0

An excellent household circular saw - lightweight, cordless, powered by a standard battery, which lasts for 30-40 minutes of continuous operation.

To prevent chips from forming on thin material, adjustment of the cutting depth is required. Works with almost all types of materials, including ceramics and laminate.

Equipped with protection against accidental switching on, overloads and overheating.

A bonus is the ability to connect a vacuum cleaner for a cleaner cut.

The rotation speed is achieved thanks to a powerful motor developed using special technology.

Specifications:

• Construction: manual;
• Battery operation: yes;
• Cutting height: 48 mm;
• Disc/bore diameter: 150/16 mm.

pros

• ease of operation and maintenance;
• reasonable cost;
• light weight.

Minuses

• there is no battery charge indicator.

RYOBI R18CS7-0

Lightweight and powerful saw with good cutting height, designed for both home and professional use.

Works great on various types of wood, metal and plastic. It fits well in the hand due to its light weight and rubberized handle, it does not slip, and is easy to handle and control.

Equipped with protection against accidental start-up, spindle lock, overheating protection.

To keep the cut clean, you can connect a vacuum cleaner. The angle of inclination is easily adjusted without additional tools.

Specifications:

• Construction: manual;
• Battery operation: yes;
• Cutting height: 60 mm;
• Disc/bore diameter: 185/10 mm;
• Tilt angle: 50 degrees.

pros

• possibility of connecting a vacuum cleaner;
• speed of work;
• versatility in terms of material;
• build quality;
• long warranty.

Minuses

• non-standard diameter of the mounting hole.

Specifications

As a rule, small circular saws are classified as lightweight tools, and therefore have rather modest qualities:

• Power – the cleanliness of cutting and overall productivity directly depend on this parameter. The nominal value for this category of saws varies between 400-800 W. This is enough for sawing thin strips and plywood.
• Rotation speed of the working disk - this characteristic will affect the quality of the cut. At high speeds, for example, cutting plastic will be ineffective, because the material being processed will begin to melt. But when working with wood, the rotation speed can be increased. In the case of working on metal, again the frequency will need to be lowered, because the cut may be uneven. This suggests a certain conclusion - it is better to have a model in which the rotation speed can be manually adjusted.
• Cutting depth - this property is directly influenced by the size of the disc and the very features of the protective casing. It often happens that saws with the same diameter of the working saw blade cut the part with different depths. The nominal characteristics are as follows: with a disk diameter of 65 millimeters, the cutting depth will not exceed 50 millimeters (the missing 15 millimeters will be limited by the casing).
• Variability of the cutting angle - this function is provided in many models of modern mini-circular saws; usually, it is set within 0-45 degrees. Although, most masters, both professionals and amateurs, do not often use this option. Therefore, it seems inappropriate to rely on its mandatory presence when purchasing an instrument.

How to choose and what to pay attention to?

When purchasing a mini circular saw, you need to evaluate the basic parameters of the tool:

1. Power - the ability to process materials of different densities depends on it. The power of mini saws ranges from 0.2 to 0.6 kW.
2. Weight - mini saws weigh up to 2.5 kg, so they are convenient to work with.
3. The depth of the cut depends on the diameter of the disc. For everyday tasks, a value from 20 to 40 mm is sufficient.
4. Speed ​​of rotation - the productivity and ability to cut different materials depends on it. The higher the indicator, the denser materials can be sawed.
5. Working at an angle - most tools are used for straight cuts and flooring at a 45 degree angle. There is a model with cuts at 60 and 90 degrees.
6. The diameter of the discs ranges from 85 to 90 mm.
7. Additional options make working with the tool more comfortable and safe. Among them are soft start, laser mark, sawdust collection, blocking the engine from accidental starting, and blowing the working surface.

Additional options

Modern models of miniature circular saws are more than often equipped with many additional options, which are an excellent help in the work of the master. Naturally, such a unit will cost more than the standard model, but in most cases it will be justified:

1. Sawing with immersion - there are examples of saws that can start cutting not necessarily from the edge of the sheet, but, for example, from the middle. This design allows for the saw blade to be raised at any time during operation. This option is very useful when you need to cut a window, hole for a tube or socket in a single sheet.
2. Splitting knife - due to the fact that wood fibers are subjected to excessive stress when interacting with the saw blade, they may close at the end of the job and the cutting blade will be in a clamped position. However, this situation can be avoided if a riving knife is placed behind the saw blade. In order to ensure the normal operation of this device, its end should be located at a distance of 3 centimeters above the lowest tooth of the cutting wheel.
3. Smooth start – the presence of this function will allow the cutting disc to gain speed evenly, without any jerks. The option will not only provide comfortable work for the technician, but will also create a more gentle environment for the operation of the electric motor.
4. Controlled speed when changing the load - the undoubted benefit of this option is that in the case of processing hard material, the electric motor independently increases the output power, while maintaining the speed stability parameter.
5. Resistance to jamming - this function is provided by a special mechanism called a slip clutch. Thus, even at the moment when the cutting wheel jams, the motor will stop rotating without any harm.
6. Prohibition of accidental start-up - almost any tool can be turned on completely accidentally. In order to prevent this situation, manufacturers simply install another start button on the case. As a result, starting the entire unit will be possible only if both buttons are pressed simultaneously. In principle, some may find this structure for operating a small saw difficult, but it will prevent many potentially dangerous situations for the operator.
7. Overload protection - this function will become especially important for lightweight devices and devices with reduced power. The protection will work automatically as soon as the load limit is reached.
8. Integration with a vacuum cleaner is an excellent additional option, useful in cases where it is necessary to keep the workplace clean.
9. Laser sight (pointer) - with its help you can carry out cutting operations without the need to apply preliminary markings to the material. However, the constant use of a laser pointer in work is more suitable for professionals, so it is worth getting used to holding it straight. Used in the production of high-precision cuts.
10. Spindle locking – the function locks the disk, protecting it from accidental rotation, for example, when changing it.
11. Electrodynamic brake - instantly slows down the rotation of the electric motor after releasing a special key, so there is no need to wait up to 10 seconds until the rotation stops completely.
12. Parallel stop – designed for making cuts parallel to the surface of the material from the side. On a special stop ruler there is a special graduation for setting the width.
13. Stationary installation - thanks to special fastenings, some versions of the models can be attached to a table or workbench, thereby obtaining an almost full-fledged resemblance to a sawing machine. Such samples have some bevel in the upper part of the body. This option is more often found in semi-professional, powerful and expensive models. With such an installation, you must once again make sure that the fasteners are securely fixed before starting work, because they will bear the bulk of the load.

Battery models may have their own additions:

• Battery capacity – the larger the capacity in mAh, the longer the tool will work (all other things being equal).
• Battery voltage - a higher value of this parameter indicates increased power of the device, as well as increased battery life.
• Type of battery - modern models use mainly lithium-ion batteries, which are characterized by high cell capacity and the absence of a “memory effect” (does not require complete discharge to zero before the next charge). However, lithium-ion batteries do not tolerate low temperatures very well and are quickly consumed in the cold. There is another option in the form of nickel-cadmium batteries; although they are considered obsolete, they have not yet completely disappeared from the market. They themselves weigh more than lithium ones, they need to be completely discharged before charging again, but they can easily withstand any temperature changes.
• The number of batteries in the set is very good, when the cordless saw kit includes several batteries at once - their presence will allow you not to take long breaks in work. Usually, there are no more than two of them, but the best option would be to have three - while one battery is charging, you can successfully work alternating the other two.

IMPORTANT! The best construction tool brands try to make interchangeable batteries for different types of their tools. For example, a battery from a jigsaw from one company can fit a mini-circular saw, a screwdriver, and an angle grinder of the same brand.

Design features of the tool

The external design of most devices is more reminiscent of an angle grinder. The only difference is the mounting angle, which allows you to install special discs for different jobs.

The main design element is an electric motor. But no less important is the torque transmission unit, as well as the component for installing the disk. The case is made from durable plastic that does not heat up from prolonged exposure and is able to withstand constant vibration and mechanical shock. The product can operate both from a 220 V network and from a rechargeable battery. The latter option is portable, but it also costs more.

To increase comfort, some manufacturers additionally equip the device with the following options:

• Adjusting the depth of cut. To accomplish this task, it is possible to shift the working part relative to the thrust plane where the equipment is located.
• Connection pipe for connecting to a vacuum cleaner. This solution will keep the space clean and tidy. Chips and dust are removed independently, so contamination will be minimal. Often such models are purchased when a person is carrying out renovation work in an apartment.
• For safe operation, protection against accidental activation is provided. Therefore, to activate the tool, you will need to hold down two buttons at the same time. Only after this will it begin to function.
• If you need to make longer cuts, you must ensure that the machine supports continuous operation.

Which disk to choose depends on the material with which you plan to work. For operations on wooden surfaces, cutting discs are an excellent option. The peculiarity of this solution is that they do not leave chips or nicks, so the product turns out smooth and neat.

Disc outer diameter

Its choice must correspond to the technical parameters of the material to be processed. Due to the fact that there are quite a lot of variations of this parameter, the manufacturer must indicate them in the operating instructions.

Nozzle hole diameter

Due to the fact that the circles differ in diameter, their nozzle holes may also be different. All this, again, will be interconnected with other parameters specified in the instructions. Some standard values ​​have a common label.

Tooth Characteristics

Large teeth are used for rough and straight cutting. Their use is characterized by the fact that much less time is spent on cutting, but its (cutting) quality leaves much to be desired. It is worth remembering that wheels with large teeth should not be used on pressed material - they will simply tear it. In this case, it is preferable to use fine-toothed discs; they are ideal for processing wood board or plywood.

IMPORTANT! Experts advise purchasing several types of cutting elements at once, so to speak, for all occasions. Wheels that have additional holes in the base are especially useful - they increase the service life, since their presence does not allow the wheel to overheat frequently during working operations. However, these saws are rarely used under such heavy loads.

Rating of the best battery models

RYOBI R18CS7-0

A high-quality model that is suitable for making long and straight cuts. Additionally, some professionals use the product to cut sheets or fit countertops and decking. The device is classified as professional, as it has an outer disk diameter of 184 m, as well as a cutting depth of 55 mm. The tool makes it possible to perform almost any job.

The operating settings of the tool are easy to change. For convenience, there is LED backlighting. On one charge, the device can cut up to 110 meters, which is a good result. The only drawback is that the tool cannot be connected to a vacuum cleaner. The diameter of the mounting hole is 16 mm. The minimum battery charging time is 45 minutes, which is a good result.

The average cost is 13,700 rubles.

RYOBI R18CS7-0

Advantages:

• Attractive appearance;
• Reliability;
• Functionality;
• LED lights;
• Efficiency;
• Accurate cutting;
• Long battery life.

Flaws:

• Not found.

DeWALT DCS576N

One of the best options, suitable for home and professional use. The device is powered by a 54 V battery. The maximum speed is 5800 rpm. The outer diameter of the disc is 190 mm, while the maximum cutting depth is 61 mm, which is an excellent indicator. But the product has one drawback - the battery is not included in the kit, you have to buy it yourself.

To increase the safety of the tool, there is an electronic brake that stops the disc in 2 seconds. The cast sole is made of durable aluminum alloy, which maintains accuracy and does not deteriorate from frequent use. The manufacturer has equipped the product with a brushless motor, which has a positive effect on service life.

Adjusting the tilt is simple and is carried out without the help of additional tools; an adjusting screw is used to perform it. The handle is completely rubberized, which guarantees a comfortable and confident grip.

Sold at a price: from 20,800 rubles.

DeWALT DCS576N

Advantages:

• High-quality electric motor;
• Reliability;
• Cutting accuracy;
• Durability;
• Convenient design;
• Efficiency;
• Convenience.

Flaws:

• High price;
• The battery is not included in the kit.

WORX SAW WX527.9

Lightweight and compact option, suitable for home use. Sold without battery, but unlike the previous copy, the cost of the tool is lower. The cutting depth can be adjusted by simply pressing; no additional tools are needed. The weight of the tool is only 1.45 kg, so a person can easily move the product and work in one hand.

The average cost is 7,100 rubles.

WORX SAW WX527.9

Advantages:

• Attractive appearance;
• Reliability;
• High-quality assembly;
• Doesn't make noise;
• Value for money;
• Life time.

Flaws:

• Not found.

MAKITA HS301DWAE

A popular product that is sold in a special case, which makes it easy to store. A rechargeable battery is used for operation. In addition, the kit includes a carbide blade, so a person will be able to work with the product immediately after purchase, no additional costs will be required. A person independently sets the cutting angle, which varies from 0 to 45 degrees.

Product weight – 1.6 kg. There is no backlight. The electric motor is durable and has a long service life. The battery voltage is 10.8 V, which is normal for such a model. The set includes 2 batteries, mounting diameter – 15 mm. The maximum speed is 1500 rpm. Cutting depth – 25.5 mm.

The average cost is 12,300 rubles.

MAKITA HS301DWAE

Advantages:

• Light weight;
• Durable housing;
• Convenient tilt angle;
• Durable case;
• Reliability;
• Good build;
• Functionality.

Flaws:

• Not detected.

Basics of safe work

Despite the fact that a mini saw is a lightweight device, it can also cause serious injuries if handled incorrectly. All operations performed will require extreme care and attention from the master:

• Safety glasses and gloves must be used during operation.
• It is forbidden to turn the saw on/off while it is under load. Always remove the cutting wheel from the material first.
• Visual control of the cutting process should be carried out only from the top position, because The rotation of the working circle occurs from the bottom direction.
• In order to obtain more accurate cuts, you need to use a special slot in the base of the platform, which is precisely intended for precise positioning.
• If there is a need to install a sighting device (laser control center), it is better to make a couple of test cuts in an unimportant place on the part.
• Mini saws do not like long periods of constant work; you should try to work in temporary periods of no more than 15 minutes.

Rating of the best mini circular saws for 2022

Economy class

3rd place: PIT PMS89-C

This sample will perfectly cut metal and wood, and at low speeds it can easily cope with plastic. The rubberized handle fits perfectly in the hand and does not slip, ensuring comfortable work. To prevent slipping, there are special notches on the start button. The general conclusion about the tool is that it has a good price/quality ratio.

PIT PMS89-C

Advantages:

• A budget option;
• Protection of disks from overheating through holes in the base;
• Large teeth.

Flaws:

• Heavy weight.

2nd place: DIOLD DP-0.55 MF

An excellent example from a Russian manufacturer, specializing in cutting wood and particle boards. Particularly designed for use at home. Able to withstand long-term loads. It has increased power, so it can process even hard wood. The set includes a rich set: ruler, wrench, additional saw blade, case.

DIOLD DP-0.55 MF

Advantages:

• Extended equipment;
• Comfortable handle grip;
• Fully focused on processing any type of wood.

Flaws:

• Not detected (for its segment).

1st place: Makita HS301DZ

This model is particularly compact, however, it is preferable to use it on materials of medium and increased softness, such as plastic, PVC pipes, soft wood. It has the ability to adjust the cutting angle variability - up to 45 degrees. Powered by rechargeable batteries, which must be purchased separately.

Makita HS301DZ

Advantages:

• No backlash;
• Convenient case for transportation;
• Light weight.

Flaws:

• Low speed.

Middle segment

2nd place: Einhell TC-CS 860/1 Kit

A multifunctional sample that works well with laminate, plastic, and even ceramic tiles, not to mention the basic materials - metal and wood. Integration with an industrial vacuum cleaner is possible. The set is perfectly equipped - by default, as many as 3 replacement disks are included!

Einhell TC-CS 860/1 Kit

Advantages:

• Power and lightness;
• Accuracy when cutting;
• Sufficient equipment.

Flaws:

• Rigid and short power cord.

1st place: BOSCH GKS 12V-26 2/0Ah x2L-BOXX

Rechargeable version with a relatively long operating time. It is positioned more as a tool for field work in the absence of a permanent power source. Has variability of angular sawing. Equipped with a spindle lock, which provides additional safety and simplifies changing the cutting element.

BOSCH GKS 12V-26 2/0Ah x2L-BOXX

Advantages:

• Increased continuous action time;
• Designed for field conditions;
• 2 batteries included by default.

Flaws:

• Expensive consumable components.

Semi-professional samples

2nd place: BOSCH UniversalCirc 12-0

The instrument is positioned as an advanced model for amateur home use. Power is supplied from a replaceable battery, which is purchased separately. A guide rail is included in the kit. It is especially noted that the control of this device is characterized by increased safety due to many locking functions (from safe inclusion to the stop spindle).

BOSCH UniversalCirc 12-0

Advantages:

• High performance;
• Increased security;
• Power and lightness.

Flaws:

• Not detected.

1st place: Makita HS301DWAE

A very expensive and productive option, equipped with many additional options. However, this greatly affected the overall cost. Capable of processing parts made of any materials for which miniature circular saws are suitable. Has an accidental activation lock.

Makita HS301DWAE

Advantages:

• Multifunctionality and versatility;
• Ergonomics;
• Lots of options available.

Flaws:

• High price.

How to choose a mini circular saw?

When choosing a tool, you need to evaluate the following characteristics:

• power - functionality in relation to materials depends on this indicator; if you need to work with material or tiles, you should choose more powerful models;
• cutting height - depends on the diameter of the disc; for domestic use, 2 to 4 cm will be sufficient;
• weight – the lower the weight, the easier it will be to operate and operate the device, however, this indicator is directly affected by the power of the device;
• diameter of the mounting hole - for most models it is 15 mm, but there are saws with a non-standard diameter;
• the presence of additional options - mini-saws are often equipped with a backlight, a laser marker, a dust collector for collecting sawdust, or the ability to connect a vacuum cleaner. All this makes using the tool more comfortable and simpler.

Eventually

Despite the fact that mini-saws are inferior in functionality to their stationary counterparts, they are more easy to use and lightweight. Thus, for an amateur craftsman creating at home, they will become indispensable assistants. However, it is always necessary to select a tool depending on future work tasks; accordingly, a thorough study of all technical characteristics will be the key to the correct and competent selection of the device. At the same time, when handling the device, you should strictly follow all safety rules and always study the operating instructions before starting carpentry operations.