Most often, a burner for a semi-automatic device is supplied as a kit. The recommended combination guarantees effective operation, but for a limited period. After some time (depending on operating conditions), the burner will have to be replaced and here the question arises - how to choose a worthy replacement?
A systematic approach will help with this. There are really only 5 key factors
determine the choice of burner:
- Current strength
- The length of the sleeve
- Cooling method
- Ergonomics
- Ease of maintenance
Let's look at each in more detail to form an idea of the best option for your welding equipment.
Burners
Article: 071.505.000 Torch MIG MP 500 5m water cooling DME50005 Semi-automatic torch MIG MP 500 with water cooling.
Connects to all welding machines with Euroadapter. Price: RUR 13,417
Article: 071.504.000 Torch MIG MP 500 4m water cooling DME50004
Semi-automatic torch MIG MP 500 with water cooling. Connects to all welding machines with Euroadapter.
Price: RUB 11,834
Article: 071.503.000 Torch MIG MP 500 3m water cooling DME50003
Semi-automatic torch MIG MP 500 with water cooling. Connects to all welding machines with Euroadapter.
Price: RUB 10,993
Article: 071.455.000 MIG torch MP 450 5m DME45005
Semi-automatic torch MIG MP 450 with air cooling. Connects to all welding machines with Euroadapter.
Price: RUB 16,491
Article: 071.454.000 MIG torch MP 450 4m DME45004
Semi-automatic torch MIG MP 450 with air cooling. Connects to all welding machines with Euroadapter.
Price: RUB 13,440
Article: 071.453.000 MIG torch MP 450 3m DME45003
Semi-automatic torch MIG MP 450 with air cooling. Connects to all welding machines with Euroadapter.
Price: RUR 11,685
Article: 071.365.000 MIG torch MP 36 5m DME3605
Semi-automatic torch MIG MP 36 with air cooling. Connects to all welding machines with Euroadapter.
Price: RUR 8,880
Article: 071.364.000 Torch MIG MP 36 4m DME3604
Semi-automatic torch MIG MP 36 with air cooling. Connects to all welding machines with Euroadapter.
Price: RUR 8,210
Article: 071.363.000 MIG torch MP 36 3m DME3603
Semi-automatic torch MIG MP 36 with air cooling. Connects to all welding machines with Euroadapter.
Price: RUB 6,261
Article: 071.255.000 Torch MIG MP 25 5m DME2505
Semi-automatic torch MIG MP 25 with air cooling. Connects to all welding machines with Euroadapter.
Price: RUR 6,389
Article: 071.254.000 Torch MIG MP 25 4m DME2504
Semi-automatic torch MIG MP 25 with air cooling. Connects to all welding machines with Euroadapter.
Price: RUB 5,338
Article: 071.253.000 MIG torch MP 25 3m DME2503
Semi-automatic torch MIG MP 25 with air cooling. Connects to all welding machines with Euroadapter.
Price: RUR 4,627
Article: 071.245.000 Torch MIG MP 24 5m DME2405
Semi-automatic torch MIG MP 24 with air cooling. Connects to all welding machines with Euroadapter.
Price: RUR 7,906
Article: 071.244.000 Torch MIG MP 24 4m DME2404
Semi-automatic torch MIG MP 24 with air cooling. Connects to all welding machines with Euroadapter.
Price: RUR 6,078
Article: 071.243.000 MIG torch MP 24 3m DME2403
Semi-automatic torch MIG MP 24 with air cooling. Connects to all welding machines with Euroadapter.
Price: RUB 5,456
Article: 071.155.000 Torch MIG MP 15 5m DME1505
The air-cooled MIG MP 15 welding torch is connected to all semi-automatic machines with a Euro adapter. The length of the torch with cable is 5 meters. The torch is designed for welding wire with a diameter of up to 1 mm.
Price: RUR 4,642
Article: 071.154.000 Torch MIG MP 15 4m DME1504
The air-cooled MIG MP 15 welding torch is connected to all semi-automatic machines with a Euro adapter. The length of the torch with cable is 4 meters. The torch is designed for welding wire with a diameter of up to 1 mm.
Price: RUR 4,053
Article: 071.153.000 Torch MIG MP 15 3m DME1503
The air-cooled MIG MP 15 welding torch is connected to all semi-automatic machines with a Euro adapter. The length of the burner with cable is 3 meters. The torch is designed for welding wire with a diameter of up to 1 mm.
Price: RUR 3,304
Water or air cooling?
Air-cooled power cable burners are designed for a duty cycle of 60%, while water-cooled burners have a duty cycle* of 100%. If you plan to weld a lot and for a long time, to do surfacing, then we recommend that you take a water-cooled torch, or use an air-cooled torch, but not at maximum current.
Do not forget that during the welding process not only the power cable, but also the torch handle heats up. Remember that welding in a mixture (CO₂ and Argon) always heats up the torch more than just welding in CO₂.
PV* — Duration of switching on in a 10-minute cycle at maximum current. Example: The MP 15 torch can weld metals without stopping at a maximum current of 160 Amps for 6 minutes, where 4 minutes of the 10 minute cycle are required to cool the power cable. The lower the current on the burner, the longer it can work without interruption.
Multilock: one welding torch – many options
Multifunctionality means more than just a set of process control tools. The Multilock system has been designed for maximum flexibility, allowing the welder to change the torch jaw depending on the shape of the elements being welded and its availability. By varying torch jaw lengths and angles, you can achieve exceptional welding results no matter how complex the welding task.
Multilock is also very convenient for replacing faulty parts. For example, if the torch jib is damaged, but the hose package is absolutely intact, then only the jib can be quickly and easily replaced thanks to the Multilock connection.
Thanks to the Multilock design, the torch jaw can be rotated 360°. For example, turning it 180° up allows you to easily and conveniently perform welding work in the ceiling position. The burner control remains the same.
Maximum and minimum current?
For semi-automatic burners there is no concept of minimum current. Everything is regulated by your device, usually 10 or 20 Amps. But the maximum current is clearly indicated in the technical specifications for each burner, and we strongly recommend not to ignore this important parameter.
The maximum current for an air-cooled burner (MP 450) is 400 Amperes in mixed gases and 500 Amps in CO₂.
Water-cooled torch (MP 500) - can weld metals in a mixture of gases at a maximum current of 450 Amps and in CO₂ at a current of 500 Amps.
Cooling method
Burner cooling can be air or liquid. For currents up to 250 A, air cooling is sufficient. With such a tool it is easy to make short seams without fear of overheating.
For long seams, high loads and large volumes of work, liquid-cooled torches are relevant. They provide additional channels for supplying and discharging liquid. The working fluid is supplied from a special cooling module to which the burner is connected. It is unsafe to operate such burners without liquid.
Torch weight and how it affects the welder
Burners can be divided into two types: for light production and for heavy industry. The standard classifier classifies burners up to 240 Amps as light industry, and burners from 240 Amps as heavy industry. On our website, the weight of the burner is indicated in full, along with the handle, cable and Euro adapter.
The higher the maximum welding current of the torch, the thicker the cross-section of the copper cable, and therefore the weight. For example, let’s compare two burners, the most popular MP 15 (3 meters) and the most industrial (air-cooled) MP 450 (3 meters) - the weight of the first is 1.6 kg, and the second is 3.7 kg. More than twice. The heavier the burner, the more difficult it is to control. Especially if the torch cable is in tension and not lying on the surface.
The length of the sleeve
We proceed from the assigned tasks. The farther the welding torch is used from the semi-automatic machine, the longer the sleeve should be. Typically the length varies from 3 to 5 meters. Masters prefer to take with a reserve, which will certainly come in handy, if not now, then in the future. But all this is individual, because some are convinced that the shorter the sleeve, the less energy loss.
Semi-automatic aluminum welding
Any of the presented torches can be used when welding aluminum. For correct operation, we recommend that you replace the steel guide channel with a Teflon channel. The Teflon channel has better sliding and is harder, which does not allow the aluminum wire inside the cable to twist and break.
In addition, when choosing a conductive tip for welding aluminum, we recommend following a simple rule: choose a tip diameter slightly larger than the diameter of the aluminum wire.
This is due to the fact that when leaving the tip, aluminum expands greatly and if the diameters match, the welding wire may stick in the tip.
Principle of operation
The included gas torch for the semi-automatic machine is an actuator for producing a welding seam in a shielding gas environment.
Gas burner for semi-automatic machine
The operating principle is as follows:
- The torch is placed to the base metal at the arc formation distance.
- Before the arc starts, shielding gas is supplied to the welding zone for a few seconds.
- Voltage is supplied to the current-carrying tip, and accordingly to the electrode wire.
- In the welding arc, the electrode wire melts and drops with the gas flow into the weld pool.
- When the torch moves along the elements being connected, a weld seam is formed.
- The protective gas environment ensures a high-quality and clean seam.
During welding work, torch elements are exposed to high temperatures. Particularly affected are the gas nozzle, the current carrying tip and the electrode holder, also called the diffuser and gas divider.
Burner device for semi-automatic machine
- burner base;
- insulating ring;
- electrode holder;
- current carrying tip;
- gas nozzle.
Failure of, for example, the current-carrying tip prevents the supply of welding wire to fill the pool.
Gas distribution nozzles
The nozzles are designed to distribute the gas flow evenly and to protect the welding tip from damage. Nozzle diameters from 9.5 mm to 19 mm are available.
Article: 071.500.190 Nozzle d19mm (MIG MP 26/400/500) SVO2619
A gas distribution nozzle with a diameter of 19 mm is installed on a MIG welding torch and serves to uniformly distribute the gas flow, as well as to protect the welding tip from mechanical impact or accidental contact with the product being welded. Suitable for MP 36/400/500 series burners.
Price: 314 RUR
Article: 071.500.160 Nozzle d16mm (MIG MP 26/400/500) SVO2616
A gas distribution nozzle with a diameter of 16 mm is installed on a MIG welding torch and serves to uniformly distribute the gas flow, as well as to protect the welding tip from mechanical impact or accidental contact with the product being welded. Suitable for MP 26/400/500 series burners.
Price: 314 RUR
Article: 071.500.140 Nozzle d14mm (MIG MP 26/400/500) SVO2614
A gas distribution nozzle with a diameter of 14 mm is installed on a MIG welding torch and serves to uniformly distribute the gas flow, as well as to protect the welding tip from mechanical impact or accidental contact with the product being welded. Suitable for MP 26/400/500 series burners.
Price: 314 RUR
Article: 071.360.190 Nozzle d19mm (MIG MP 36) SVO3619
A gas distribution nozzle with a diameter of 19 mm is installed on a MIG welding torch and serves to uniformly distribute the gas flow, as well as to protect the welding tip from mechanical impact or accidental contact with the product being welded. Suitable for MP 36 series burners.
Price: 295 RUR
Article: 071.360.160 Nozzle d16mm (MIG MP 36) SVO3616
A gas distribution nozzle with a diameter of 16 mm is installed on a MIG welding torch and serves to uniformly distribute the gas flow, as well as to protect the welding tip from mechanical impact or accidental contact with the product being welded. Suitable for MP 36 series burners.
Price: 295 RUR
Article: 071.360.120 Nozzle d12mm (MIG MP 36) SVO3612
A gas distribution nozzle with a diameter of 12 mm is installed on a MIG welding torch and serves to uniformly distribute the gas flow, as well as to protect the welding tip from mechanical impact or accidental contact with the product being welded. Suitable for MP 36 series burners.
Price: 295 RUR
Article: 071.250.180 Nozzle d18mm (MIG MP 25) SVO2518
A gas distribution nozzle with a diameter of 18 mm is installed on a MIG welding torch and serves to uniformly distribute the gas flow, as well as to protect the welding tip from mechanical impact or accidental contact with the product being welded. Suitable for MP 25 series burners.
Price: 168 RUR
Article: 071.250.150 Nozzle d15mm (MIG MP 25) SVO2515
A gas distribution nozzle with a diameter of 15 mm is installed on a MIG welding torch and serves to uniformly distribute the gas flow, as well as to protect the welding tip from mechanical impact or accidental contact with the product being welded. Suitable for MP 25 series burners.
Price: 168 RUR
Article: 071.250.110 Nozzle d11mm (MIG MP 25) SVO2511
A gas distribution nozzle with a diameter of 11 mm is installed on a MIG welding torch and serves to uniformly distribute the gas flow, as well as to protect the welding tip from mechanical impact or accidental contact with the product being welded. Suitable for MP 25 series burners.
Price: 168 RUR
Article: 071.240.170 Nozzle d17mm (MIG MP 24/240) SVO2417
A gas distribution nozzle with a diameter of 17 mm is installed on a MIG welding torch and serves to uniformly distribute the gas flow, as well as to protect the welding tip from mechanical impact or accidental contact with the product being welded. Suitable for MP 24/240 series burners.
Price: 170 RUR
Article: 071.240.125 Nozzle d12mm (MIG MP 24/240) SVO2412
A gas distribution nozzle with a diameter of 12 mm is installed on a MIG welding torch and serves to uniformly distribute the gas flow, as well as to protect the welding tip from mechanical impact or accidental contact with the product being welded. Suitable for MP 24/240 series burners.
Price: 170 RUR
Article: 071.240.100 Nozzle d10mm (MIG MP 24/240) SVO2410
A gas distribution nozzle with a diameter of 10 mm is installed on a MIG welding torch and serves to uniformly distribute the gas flow, as well as to protect the welding tip from mechanical impact or accidental contact with the product being welded. Suitable for MP 24/240 series burners.
Price: 170 RUR
Article: 071.150.160 Nozzle d16mm (MIG MP 15) SVO1516
A gas distribution nozzle with a diameter of 16 mm is installed on a MIG welding torch and serves to uniformly distribute the gas flow, as well as to protect the welding tip from mechanical impact or accidental contact with the product being welded. Suitable for MP 15 series burners.
Price: 108 RUR
Article: 071.150.120 Nozzle d12mm (MIG MP 15) SVO1512
A gas distribution nozzle with a diameter of 12 mm is installed on a MIG welding torch and serves to uniformly distribute the gas flow, as well as to protect the welding tip from mechanical impact or accidental contact with the product being welded. Suitable for MP 15 series burners.
Price: 108 RUR
Article: 071.150.095 Nozzle d9.5mm (MIG MP 15) SVO1595
A gas distribution nozzle with a diameter of 9.5 mm is installed on a MIG welding torch and serves to uniformly distribute the gas flow, as well as to protect the welding tip from mechanical impact or accidental contact with the product being welded. Suitable for MP 15 series burners.
Price: 108 RUR
Welding tips
The tips are made of virgin copper. The holes for the wire are laser-cut, which ensures perfect contact and no sticking. When choosing a tip, pay attention to the thread type (M6 or M8).
Article: 071.730.816 Welding tip Cu-Cr-Zr M8 d1.6mm LED8030-16
Standard welding tip with M8 thread for wire with a diameter of 1.6 mm. Suitable for MIG MP 36/400/450/500 torches. Made of copper with the addition of chromium and zirconium, which increase wear resistance and extend the service life of the tip.
Price: 78 rub.
Article: 071.730.812 Welding tip Cu-Cr-Zr M8 d1.2mm LED8030-12
Standard welding tip with M8 thread for wire with a diameter of 1.2 mm. Suitable for MIG MP 26/36/400/450/500 torches. Made of copper with the addition of chromium and zirconium, which increase wear resistance and extend the service life of the tip.
Price: 78 rub.
Article: 071.730.810 Welding tip Cu-Cr-Zr М8 d1.0mm LED8030-10
Standard welding tip with M8 thread for wire with a diameter of 1.0 mm. Suitable for MIG MP 26/36/400/450/500 torches. Made of copper with the addition of chromium and zirconium, which increase wear resistance and extend the service life of the tip.
Price: 78 rub.
Article: 071.628.820 Welding tip E-CU M8 d2.0mm LED8010-20
Standard welding tip with M8 thread for wire with a diameter of 2.0 mm. Suitable for MIG MP 36/450/500 torches. Made of copper.
Price: 52 rub.
Article: 071.628.816 Welding tip E-CU M8 d1.6mm LED8010-16
Standard welding tip with M8 thread for wire with a diameter of 1.6 mm. Suitable for MIG MP 36/400/450/500 torches. Made of copper.
Price: 52 rub.
Article: 071.628.812 Welding tip E-CU M8 d1.2mm LED8010-12
Standard welding tip with M8 thread for wire with a diameter of 1.2 mm. Suitable for MIG MP 26/36/400/450/500 torches. Made of copper.
Price: 52 rub.
Article: 071.728.612 Welding tip Cu-Cr-Zr M6 d1.2mm LED6830-12
Standard welding tip with M6 thread for wire with a diameter of 1.2 mm. Suitable for MIG MP 24/25/26/36/400/500 and MASTER MIG MP 24/25 torches. Made of copper with the addition of chromium and zirconium, which increase wear resistance and extend the service life of the tip.
Price: 54 rub.
Article: 071.728.610 Welding tip Cu-Cr-Zr M6 d1.0mm LED6830-10
Standard welding tip with M6 thread for wire with a diameter of 1.0 mm. Suitable for MIG MP 24/25/26/36/400/500 and MASTER MIG MP 24/25 torches. Made of copper with the addition of chromium and zirconium, which increase wear resistance and extend the service life of the tip.
Price: 54 rub.
Article: 071.728.608 Welding tip Cu-Cr-Zr M6 d0.8mm LED6830-08
Standard welding tip with M6 thread for wire with a diameter of 0.8 mm. Suitable for MIG MP 24/25/26/36/500 and MASTER MIG MP 24/25 torches. Made of copper with the addition of chromium and zirconium, which increase wear resistance and extend the service life of the tip.
Price: 54 rub.
Article: 071.628.612 Welding tip E-CU M6 d1.2mm LED6810-12
Standard welding tip with M6 thread for wire with a diameter of 1.2 mm. Suitable for MIG MP 24/25/26/36/400/500 and MASTER MIG MP 24/25 torches. Made of copper.
Price: 31 rub.
Article: 071.628.610 Welding tip E-CU M6 d1.0mm LED6810-10
Standard welding tip with M6 thread for wire with a diameter of 1.0 mm. Suitable for MIG MP 24/25/26/36/400/500 and MASTER MIG MP 24/25 torches. Made of copper.
Price: 31 rub.
Article: 071.628.608 Welding tip E-CU M6 d0.8mm LED6810-08
Standard welding tip with M6 thread for wire with a diameter of 0.8 mm. Suitable for MIG MP 24/25/26/36/500 and MASTER MIG MP 24/25 torches. Made of copper.
Price: 31 rub.
Article: 071.625.612 Straight welding tip E-CU M6 d1.2mm LED6510-12
Straight welding tip with M6 thread for wire with a diameter of 1.2 mm. Suitable for MIG MP 15 and MASTER MIG MP 15 torches. Made of copper.
Price: 20 rub.
Article: 071.625.610 Straight welding tip E-CU M6 d1.0mm LED6510-10
Straight welding tip with M6 thread for wire with a diameter of 1.0 mm. Suitable for MIG MP 15 and MASTER MIG MP 15 torches. Made of copper.
Price: 20 rub.
Article: 071.625.608 Straight welding tip E-CU M6 d0.8mm LED6510-08
Straight welding tip with M6 thread for wire with a diameter of 0.8 mm. Suitable for MIG MP 15 and MASTER MIG MP 15 torches. Made of copper.
Price: 20 rub.
Torches for semi-automatic welding (MIG-MAG)
Torches for semi-automatic welding
This section presents gas torches for performing welding work in a shielded gas environment in a semi-automatic mode, related to the MIG method, arc welding with a consumable electrode (welding wire) in an inert gas environment. The main purpose of the torch for a welding machine is the formation of an electric arc, as well as the supply of shielding gas and electrode wire to the combustion zone. The filler wire is fed automatically using a special device and passes through the gas diffuser and the contact tip of the torch.
The gas burner consists of:
- working nozzle;
- contact tip for supplying welding current;
- handles with protective gas supply tube and input for welding wire.
The burner nozzle is in constant interaction with the molten metal. This can lead to metal adhesion and disruption of the technological process. Burner manufacturers use various methods to eliminate this phenomenon:
- nozzle polishing;
- chrome plating of nozzle;
- making the nozzle from special ceramics that are resistant to high temperatures.
To ensure long-term operation of the nozzle, it is cooled by air or liquid.
Tips for supplying welding current are made of various conductive materials: copper, bronze, copper alloys with graphite and tungsten. At a higher cost, copper-tungsten tips are the most durable.
offers products with various characteristics designed to work together with semi-automatic machines from different manufacturers. All of them are distinguished by high quality, ergonomics and long service life. The price of welding torches for semi-automatic machines is reduced due to direct supplies of products from manufacturers. Gas torches BARS Mig, EVO Mig, MB GRIP, Mig ERGOPLUS, Mig MAXI 450, RF, TBi, A-1231, GDPG are presented for use with various semi-automatic welding machines. The devices have different types of cooling (air or liquid) and connections (“Euro” or pin), are designed for different operating currents (from 130 to 500 A) and wire diameter from 0.8 to 2 mm. They are equipped with cables of different lengths (from 3 to 5 m) for gas supply and supply voltage, and are also equipped with a start button on the handle. The swivel connection between the cable and the handle ensures ease of use of the torch.
A wide range of gas burners with different prices allows you to profitably buy a semi-automatic burner in accordance with your individual needs. Experienced specialists will provide qualified assistance and answer all questions when selecting and purchasing a product.
Tip inserts
Inserts are used to fix the welding tip.
Article: 071.250.803 Insert for tip M8 25mm (MIG MP 400/500) EGO5025-168
The M8 tip insert for MIG torches is installed on the semi-automatic torch neck and serves to secure the welding tip. The product is made of brass.
Price: 78 rub.
Article: 071.360.803 Insert for tip M8 28mm (MIG MP 36) EGO3628-88
The MIG MP 36 torch tip insert is installed on the semi-automatic torch neck and serves to secure the welding tip. M8 thread. The product is made of brass.
Price: 65 RUR
Article: 071.360.603 Insert for tip M6 28mm (MIG MP 36) EGO3628-86
The MIG MP 36 torch tip insert is installed on the semi-automatic torch neck and serves to secure the welding tip. M6 thread. The product is made of brass.
Price: 65 RUR
Article: 071.240.603 Insert for tip M6 26mm (MIG MP 24/240) EGO2426-66
The tip insert for MIG MP 24/240 torches is installed on the jib of a semi-automatic torch and serves to fix the welding tip. M6 thread. The product is made of brass.
Price: 63 RUR
Article: 071.250.003 Insert for tip M6 35mm (MIG MP 25) EGO2535-86
The tip insert for MIG MP 25 torches is installed on the neck of a semi-automatic torch and serves to fix the welding tip. M6 thread. The product is made of copper.
Price: 77 RUR
Gas diffusers
Diffusers evenly distribute the incoming gas to the nozzle.
Article: 071.500.005 Ceramic gas diffuser (MIG MP 400/500) VKO5028
The ceramic gas diffuser for the MIG MP 400/500 torch is installed on the jib of a semi-automatic torch and serves to uniformly distribute the incoming gas into the nozzle.
Price: 46 RUR
Article: 071.360.005 Ceramic gas diffuser (MIG MP 36) VKO3632-2
The ceramic gas diffuser for the MIG MP 36 torch is installed on the jib of a semi-automatic torch and serves to uniformly distribute the incoming gas into the nozzle.
Price: 38 rub.
Article: 071.240.005 Ceramic gas diffuser (MIG MP 24/240) VKO2420
The ceramic gas diffuser for the MIG MP 24/240 torch is installed on the jib of a semi-automatic torch and serves to uniformly distribute the incoming gas into the nozzle.
Price: 39 RUR
Ganders
Replacing the gander will save the cost of purchasing a new burner in case of mechanical damage to the product.
Article: 071.500.007 Gander (MIG MP 500) VOZ5010
The MIG MP 500 gooseneck is an integral structural part of a semi-automatic welding torch. Connects to the torch handle and extends it for ease of welding. The welding tip and nozzle, as well as other necessary elements, are attached to the gander.
Price: 2,600 rub.
Article: 071.360.007 Gander (MIG MP 36) VOZ3608-01
The MIG MP 36 gooseneck is an integral structural part of a semi-automatic welding torch. Connects to the torch handle and extends it for ease of welding. The welding tip and nozzle, as well as other necessary elements, are attached to the gander.
Price: RUR 1,253
Article: 071.250.007 Gander (MIG MP 25) VOZ2508
The MIG MP 25 gooseneck is an integral structural part of a semi-automatic welding torch. Connects to the torch handle and extends it for ease of welding. The welding tip and nozzle, as well as other necessary elements, are attached to the gander.
Price: 743 RUR
Article: 071.240.007 Gander (MIG MP 24) VOZ2406
The MIG MP 24 gooseneck is an integral structural part of a semi-automatic welding torch. Connects to the torch handle and extends it for ease of welding. The welding tip and nozzle, as well as other necessary elements, are attached to the gander.
Price: RUR 1,116
Article: 071.150.007 Gander (MIG MP 15) VOZ1506
The MIG MP 15 gooseneck is an integral structural part of a semi-automatic welding torch. Connects to the torch handle and extends it for ease of welding. The welding tip and nozzle, as well as other necessary elements, are attached to the gander.
Price: 343 RUR
Ease of maintenance
All burner parts wear out sooner or later and require replacement.
The wearing parts of the mig torch include the nozzle, diffuser and contact tip.
. They are responsible for the passage of shielding gas and are the front zone of the welding system and directly affect the quality of the weld and the performance of the equipment.
For high-quality welding, it is necessary to periodically check the condition of the internal hole of the contact tip. It should not be excessively worn. You should also clean the inner surface of the welding nozzle and diffuser from splashes so that they do not interfere with the flow of shielding gas.
If anything is worn out, it should be replaced immediately. The “right” torch is compatible with universal consumables, not just proprietary brand consumables.
FUBAG provides a complete range of high quality universal consumables that are suitable for welding torches from most manufacturers.
That's all, now you are ready to make an informed choice of the tool you need. If you still have questions, watch the video on choosing a burner for a semi-automatic machine:
Guide channels
The guide channel ensures smooth sliding of the wire, reduces the risk of tangling and bending of the wire.
Article: 071.320.550 Guide channel TEFLON 5.5m Yellow (1.2-1.6mm) OMS2030-05
Teflon guide channel is recommended for aluminum wire. Suitable for welding wire with diameter 1.2-1.6mm. Channel length 5.5 m. Compatible with MIG MP 36, MIG MP 400 and MIG MP 500 torches.
Price: RUB 1,301
Article: 071.320.450 TEFLON guide channel 4.5m Yellow (1.2-1.6mm) OMS2030-04
Teflon guide channel is recommended for aluminum wire. Suitable for welding wire with diameter 1.2-1.6mm. Channel length 4.5 m. Compatible with MIG MP 36, MIG MP 400 and MIG MP 500 torches.
Price: 985 RUR
Article: 071.320.350 TEFLON guide channel 3.5m Yellow (1.2-1.6mm) OMS2030-03
Teflon guide channel is recommended for aluminum wire. Suitable for welding wire with diameter 1.2-1.6mm. Channel length 3.5 m. Compatible with MIG MP 36, MIG MP 400 and MIG MP 500 torches.
Price: 850 RUR
Article: 071.220.550 TEFLON guide channel 5.5m Red (1.0-1.2mm) OMS2020-05
Teflon guide channel is recommended for aluminum wire. Suitable for welding wire with diameter 1.0-1.2mm. Channel length 5.5 m. Compatible with torches MIG MP 24, MASTER MIG MP 24 and MIG MP 25, MASTER MIG MP 25, MIG MP 26.
Price: RUR 1,291
Article: 071.220.450 TEFLON guide channel 4.5m Red (1.0-1.2mm) OMS2020-04
Teflon guide channel is recommended for aluminum wire. Suitable for welding wire with diameter 1.0-1.2mm. Channel length 4.5 m. Compatible with torches MIG MP 24, MASTER MIG MP 24 and MIG MP 25, MASTER MIG MP 25, MIG MP 26.
Price: RUR 1,028
Article: 171.220.350 TEFLON guide channel 3.5m Red (1.0-1.2mm) OMS2020-03
Teflon guide channel is recommended for aluminum wire. Suitable for welding wire with diameter 1.0-1.2mm. Channel length 3.5 m. Compatible with torches MIG MP 24, MASTER MIG MP 24 and MIG MP 25, MASTER MIG MP 25, MIG MP 26.
Price: 851 RUR
Article: 071.120.550 Guide channel TEFLON 5.5m Blue (0.6-0.9mm) OMS2010-05
Teflon guide channel is recommended for aluminum wire. Suitable for welding wire with diameter 0.6-0.9mm. Channel length 5.5 m. Compatible with MIG MP 15 and MASTER MIG MP 15 torches.
Price: RUR 1,289
Article: 071.120.450 TEFLON guide channel 4.5m Blue (0.6-0.9mm) OMS2010-04
Teflon guide channel is recommended for aluminum wire. Suitable for welding wire with diameter 0.6-0.9mm. Channel length 4.5 m. Compatible with MIG MP 15 and MASTER MIG MP 15 torches.
Price: RUR 1,077
Article: 171.120.350 Guide channel TEFLON 3.5m Blue (0.6-0.9mm) OMS2010-03
Teflon guide channel is recommended for aluminum wire. Suitable for welding wire with diameter 0.6-0.9mm. Channel length 3.5 m. Compatible with MIG MP 15 and MASTER MIG MP 15 torches.
Price: 847 RUR
Article: 171.300.550 Guide channel STEEL 5.5m Yellow (1.2-1.6mm) OMS1030-05
The guide channel is recommended for use with steel and stainless steel wires. Suitable for welding wire with diameter 1.2-1.6mm. Channel length 5.5 m. Compatible with MIG MP 36, MIG MP 400 and MIG MP 500 torches.
Price: 317 RUR
Article: 171.300.450 Guide channel STEEL 4.5m Yellow (1.2-1.6mm) OMS1030-04
The guide channel is recommended for use with steel and stainless steel wires. Suitable for welding wire with diameter 1.2-1.6mm. Channel length 4.5 m. Compatible with MIG MP 36, MIG MP 400 and MIG MP 500 torches.
Price: 257 RUR
Article: 171.300.350 Guide channel STEEL 3.5m Yellow (1.2-1.6mm) OMS1030-03
The guide channel is recommended for use with steel and stainless steel wires. Suitable for welding wire with diameter 1.2-1.6mm. Channel length 3.5 m. Compatible with MIG MP 36, MIG MP 400 and MIG MP 500 torches.
Price: 199 RUR
Article: 171.200.550 Guide channel STEEL 5.5m Red (1.0-1.2mm) OMS1020-05
The guide channel is recommended for use with steel and stainless steel wires. Suitable for welding wire with diameter 1.0-1.2mm. Channel length 5.5 m. Compatible with torches MIG MP 24, MASTER MIG MP 24 and MIG MP 25, MASTER MIG MP 25, MIG MP 26.
Price: 315 RUR
Article: 171.200.450 Guide channel STEEL 4.5m Red (1.0-1.2mm) OMS1020-04
The guide channel is recommended for use with steel and stainless steel wires. Suitable for welding wire with diameter 1.0-1.2mm. Channel length 4.5 m. Compatible with torches MIG MP 24, MASTER MIG MP 24 and MIG MP 25, MASTER MIG MP 25, MIG MP 26.
Price: 257 RUR
Article: 171.200.350 Guide channel STEEL 3.5m Red (1.0-1.2mm) OMS1020-03
The guide channel is recommended for use with steel and stainless steel wires. Suitable for welding wire with diameter 1.0-1.2mm. Channel length 3.5 m. Compatible with torches MIG MP 24, MASTER MIG MP 24 and MIG MP 25, MASTER MIG MP 25, MIG MP 26.
Price: 199 RUR
Article: 171.100.550 Guide channel STEEL 5.5m Blue (0.6-0.9mm) OMS1010-05
The guide channel is recommended for use with steel and stainless steel wires. Suitable for welding wire with diameter 0.6-0.9mm. Channel length 5.5 m. Compatible with MIG MP 15 and MASTER MIG MP 15 torches.
Price: 316 RUR
Article: 071.100.450 Guide channel STEEL 4.5m Blue (0.6-0.9mm) OMS1010-04
The guide channel is recommended for use with steel and stainless steel wires. Suitable for welding wire with diameter 0.6-0.9mm. Channel length 4.5 m. Compatible with MIG MP 15 and MASTER MIG MP 15 torches.
Price: 257 RUR
Article: 071.100.350 Guide channel STEEL 3.5m Blue (0.6-0.9mm) OMS1010-03
The guide channel is recommended for use with steel and stainless steel wires. Suitable for welding wire with diameter 0.6-0.9mm. Channel length 3.5 m. Compatible with MIG MP 15 and MASTER MIG MP 15 torches.
Price: 200 rub.
