The appearance of upholstered furniture often deteriorates due to abrasions, difficult to remove stains and other defects. In this case, it is not necessary to throw away the furniture and spend money on new ones, since you can reupholster it. A furniture stapler can help in this matter; thanks to special staples, it secures the material to any type of frame. In this article we will talk in detail about devices of this type and find out what types they are divided into.
How to choose a good stapler
When choosing the best option, you should pay attention to several key characteristics:
- Case. It is better to purchase devices whose body is made of light alloys. It is much more reliable than plastic. Metal guns are very resistant to external factors and will serve you for a long time.
- Construction type. Staplers are available in both composite and solid versions. Composite models are more convenient to store and are suitable for small jobs. If one part breaks, it can be easily replaced.
- Magazine color. It is preferable to use transparent magazines so that you can see how many staples and nails are left.
- Pen. Ergonomically shaped handle with a rubberized surface for greater comfort when repairing upholstery. Your hand will not get tired for a long time, and you will finish your work faster.
- The stopper prevents accidental pulling and will not spoil the work.
We hope this article has provided you with the information you need. We wish you successful and quality shopping!
What types of construction staplers are there?
The classification of furniture staplers is based on the driving force that drives the mechanism:
- Mechanical staplers operate by simply pressing with your finger. This requires a certain force, so working with such devices is inconvenient when colliding with hard, dense material. Another disadvantage is the small number of staples, which makes it necessary to constantly reload the cassette. However, they also have their advantages - low price and durability. The best mechanical manual staplers are quite expensive, but they also last for several years.
- Electric models - when you pull the trigger, the mechanism is powered by electricity. This makes them much easier to work with, and they are suitable even for dense materials, since their productivity is higher than that of mechanical staplers. However, the dimensions and weight are larger, and such furniture staplers usually cost more.
- A separate type of electric staplers are rechargeable staplers. If the former operate from the mains, which is sometimes hampered by the power cord, then the latter are powered by batteries, which increases their size and weight.
- Pneumatic - the bracket is pushed out under the action of compressed air, which is supplied from a special compressor. These furniture staplers can be chosen not for home use, but for professional work. They are highly efficient and require no effort to operate the mechanism. However, these devices are troublesome - they must be constantly connected to the hose. In addition, the mechanism is very noisy, which is not suitable for home use.
To choose a good stapler for furniture, you can pay attention to another classification. Depending on performance, models are divided into 3 categories:
- Household - good for infrequent use. These are mechanical furniture staplers from the budget segment, which can be purchased at a low price.
- Professional - devices with high performance for working on any surface. Thanks to them, you can hammer not only staples, but also nails. Both electric and pneumatic devices are used.
- Semi-professional is a conditional intermediate category. These are quite powerful devices that can be used both at work and at home. They are not as expensive as professional ones, but at the same time more expensive than home ones. They belong to the middle price category.
Kinds
Today, a large variety of staplers with the latest modifications are available for sale. Among this number, experts divide them into three main groups:
- Mechanical. They are considered the simplest and most effective to use. No additional accessories required. To work with this type of stapler, you will only need to expend physical strength. The maintenance process is very simple and requires only periodic lubrication of the main parts. The service life of such a tool reaches eight years. Excellent for performing a small amount of work, since with long loads your hands will get tired and work efficiency will decrease several times.
- Electrical. The main purpose is to perform an average amount of work at an almost professional level. Many instruments in this class require connection to an electrical outlet, but exceptions can be found with a self-contained battery. The work begins with setting the impact mechanism in motion by simply pressing a special button. The electric motor has a force several times greater than that of conventional models, thanks to which it can be used to pierce even the densest materials.
- Pneumatic. Many users consider such staplers to be the most productive and powerful. They work using a compressor, so they are most often used in furniture manufacturing enterprises. The spring is replaced by a pneumatic cylinder, which is driven by air. This decision by the manufacturer allows you to increase the workforce and the volume of work performed.
Mechanical furniture staplers
The peculiarity of this tool is that the device is activated by simply pressing the lever (handle). The mechanism does not use electricity, but only mechanical pressure on the handle. Thus, the price of this tool is generally quite reasonable.
STAYER 3150 z01
An affordable mechanical stapler for those who do DIY projects or do them from time to time. A wide range of sizes allows the stapler to be used for upholstery, fastening insulation materials, plastic and wood panels to frames and bases. The stapler body is made of metal and is drop-resistant, and the impact mechanism is reliable. The functionality of the tool is complemented by adjustable impact force, thanks to which the striker does not leave marks on the surface of the material. The owners did not find any significant shortcomings in the operation of the stapler, but the lack of a rubber coating on the handle definitely reduces the comfort of use.
Advantages:
- low cost;
- durable body;
- staples from 4 to 14 mm;
- inclined loading mechanism.
Flaws:
- Metal handle without coating;
- weight more than 500 g.
BARS 40003
BARS 40003 is a reliable mechanical stapler with continuously adjustable impact force, which allows you to control the depth to which the staple enters the material. This is done using a wheel on one side of the housing.
The tool is excellent for use in the furniture industry for upholstery and furniture assembly, and can also be used in some finishing and construction work. As owners note, it reliably drives staples into wood, wood panels and drywall, and also allows them to fasten leather, fabric, cardboard, foil and other materials. Type 53 staples with a height of 4 to 14 mm are used.
The stapler has a durable metal body with an ergonomic handle and non-slip grip for a comfortable and secure grip. The stapler is also equipped with an oil filler neck to lubricate the working parts of the tool, which significantly extends its service life.
- Adjustable blade impact force.
- For stitching.
- Lubrication system with non-slip handle.
- Staple type: 53.
- Staple sizes: 4-14 mm.
- Weight: 645 g.
STANLEY Light Duty 6-TR150L
Another hero of our list is STANLEY Light Duty 6-TR150L.
The stapler not only fits staples from 6 to 14mm in height, but also J-nails from 12 to 15mm in height, making it even more versatile.
The tool is very easy to use. Its striking mechanism is very smooth and requires minimal effort to operate. The mechanism allows you to dive even into hard materials. And when using even cheap paper clips, there are practically no misfires.
Also worth noting is the fact that the stapler has easy access to the magazine, so installing staples and dowels requires a minimum of time and effort.
It also has a durable die-cast aluminum body that fits well in your clenched hand. The dimensions of the tool are optimal, making it convenient to use for both large and small hands. There is a rubber grip on the back of the lever that provides a secure grip when using the tool. Overall, if you are looking for a convenient mechanical stapler with nail driving capabilities, I would recommend this model.
- Anti-slip pad.
- Type A paper clip.
- For J-type nails.
- Staple size: 6 - 14 mm.
- Nail length: 12 - 15 mm.
Kraftool 31524
The most important feature of this mechanical stapler is its versatility. After all, it works with staples of sizes 13, 36, 140, 53 and 53F from 6 to 14 mm, as well as with nails 300 and 500 mm up to 16 mm in length. In addition, it has adjustable impact force. Overall, it is suitable for a wide range of applications in the furniture and household goods industry. The body of this stapler is made of plastic, but it is very durable. The handle has a rubber coating for a secure grip.
The stapler is also lightweight and ergonomically shaped, making it comfortable for long-term use. Below it is a convenient staple feeder, as well as an inspection window to check the number of staples needed. It is also worth noting the presence of a handle lock, which will prevent accidental activation.
In conclusion, I want to say that if you need a universal mechanical stapler, then Kraftool 31524 is the ideal solution.
- Adjustable impact force.
- Handle lock.
- View window.
- Staple types 13, 36, 53, 53F, 140.
- For nail types 300, 500.
- Staple sizes: 6-14 mm.
- Nail length: up to 16 mm.
- Dimensions: 280 x 40 x 140 mm.
- Weight: 500 g.
Gross 41000
An inexpensive but good stapler made entirely of metal, very durable and ideal for the home. At home, you can use it to repair or refasten furniture, stitch together sheet metal, insulation materials and foil. The staple gun works with the most popular staple guns, and there is a variety and availability of staple guns to suit every need. The magazine has a window for checking wear, and the impact force can be adjusted using a convenient adjustment knob. The stapler is close to medium in size, which gives it an added benefit when working in tight spaces where larger models would be useless.
Advantages:
- Stepless adjustment;
- low price;
- well thought out ergonomics;
- chrome body;
- has a viewing window.
Flaws:
- Demand for high quality staple foods.
Gross 41002
Like the previous stapler in this video, this stapler features a durable, high-pressure die-cast aluminum alloy body and an ergonomically shaped handle that allows for optimal hand positioning and reduced fatigue during extended use.
This stapler is often used in professional applications. Not only for its reliability and performance, but also for its versatility. After all, it can work with staples of types 13 and 53 with a height of 6 to 16 mm, as well as with 300 nails up to 16 mm long. It is also worth noting that this tool has an adjustable impact force, which allows it to be used on both soft and hard materials.
Another design feature is the bottom-loading staple system, which speeds up the installation process and makes it easier to remove staples that may become jammed. The tool also has a window to check the quantity of consumables. Thanks to the longer tip, the stapler leaves a small gap between the body of the stapler and the working surface. This allows operators to see exactly where the tool needs to be placed, especially in hard-to-reach corners and crevices. This stapler also features a handle locking mechanism to prevent the tool from starting on its own and for storage.
Overall, the Gross 41002 is a great stapler for professional use.
- Dial pressure adjustment.
- Handle lock.
- View window.
- Staple type 13, 53.
- For type 300 staple nails.
- Staple sizes: 6 - 16 mm.
- Nail length: up to 16 mm.
Gross 41007
The Gross 41007 mechanical stapler is widely used in furniture making and is liked by professionals for its reliability and ease of use.
The durable aluminum alloy body is die-cast for maximum durability. The stapler handle is ergonomically designed for long-term use without fatigue. The handle of the stapler also has a rubberized coating for greater comfort.
The stapler can use 140 staples and 300 nails up to 16mm long. It is also worth noting that the tool is equipped with a mechanism for rapid insertion of staples. A small hole allows you to check the number of staples.
Other features of the Gross 41007 include adjustable impact force, allowing it to be used for sewing both soft and hard materials. To prevent accidental activation, the handle is equipped with a special locking mechanism.
Owners have responded very positively to this stapler and note that it does a great job of driving staples and nails into hard materials without breaking even after years of heavy use.
Therefore, if you are looking for a reliable, professional stapler, pay attention to the Gross 41007 model.
- Anti-slip pad.
- Knife handle for adjusting the force of impact.
- Lever.
- View window.
- Staple type 140.
- For nails type 300.
- Staple sizes: 6 - 14 mm.
- Nail length: up to 16 mm.
Inforce 06-09-42
Inforce 06-09-42 is also among the best mechanical staplers. In the rating of mechanical furniture staplers, this model is one of the most affordable: the optimal price is 800 rubles.
The characteristics of the tool are as follows:
- suitable for use with staples type 53/A, from 4 to 14 mm;
- metal case;
- Adjustable shock system;
- The set includes 400 paper clips and a blister - transparent packaging.
matrix 40902
Convenient staple gun for home or small workshop. Does not have a nail handling function, but handles staples very easily. According to customer reviews, the stapler's powerful 14mm spring is capable of driving a standard size 53 staple all the way into wood. If the material is softer, the impact force can be adjusted using a stepless pressure screw. The body of the stapler is made of stamped metal; it is heavier than plastic staplers, but surpasses them in reliability.
Advantages:
- Screw strength adjustment;
- 53 staple size;
- metal case;
- ease of use;
- capacious magazine;
- low cost.
Flaws:
- slippery handle;
- The rubber insert does not hold well.
Network furniture staplers
The tools are connected to the mains. This makes them much lighter, but also reduces their maneuverability.
Black&Decker KX418E
This red model works with 10.6mm wide staples, making it suitable for a wide range of applications. The powerful motor of this instrument allows it to perform twenty strokes in one minute.
| Power cord length | 3m |
| Power | 220 V network |
| Magazine capacity | 64 pcs. |
| Power | 1500 W |
- Powerful motor (1500 W);
- Twenty beats per minute;
- 64 staples available;
- The user has the opportunity to choose from seven numbers, which allows you to adjust the fastening of the smallest objects;
- High aiming accuracy.
- not found.
Price: from 2,000 to 3,900 rubles.
Furniture stapler Black&Decker KX418E
Recently I decided to redo all the upholstered furniture in the apartment and change the material of their surface. I bought the styles I liked at the fabric store and immediately went to the hardware store. The salesman there advised me to buy this particular model because it is efficient in operation and quite lightweight, so it would be much more convenient for me to handle it. I am very pleased with my purchase and have no regrets. I would advise anyone to purchase this tried and tested device!
Novus J165EC
A powerful electric stapler opens the ranking. It performs its work via the network and is used as the main tool for finishing and upholstery work. Nails (16-25 mm) and staples (15-26 mm) are available. The magazine has a window where you can check the number of staples remaining.
| Power | 230 W |
| Power | Power supply 220 V |
| Maximum speed | 20 beats per minute |
| Weight | 1.64 kg |
- Well suited for finishing and upholstery work;
- Nails and staples can be used;
- There is a window on the magazine to check the number of parts;
- There is a smooth adjustment of the impact force;
- Comfortable handle;
- High safety locking of consumables;
- protection against accidental activation;
- The thin and long tip of the stapler makes it very convenient to use.
- not found.
Price: from 5,000 to 7,500 rubles.
Furniture stapler Novus J165EC
The last stapler from this manufacturer served me for about five years, so I decided to purchase a more modern analogue from the same company. The new model turned out to be quite compact in size and effective in practice. Completely satisfied with its use. The old, large sofa was stuffed in a few minutes, and even my arms didn’t get tired.
Novus J-105 EADHG
Its main purpose is indoor work and decoration. It is considered a universal device of this type, since it uses ADH 6 - 14 mm staples in its work. It is lightweight and compact in size, which makes it very convenient for working in the air.
| Power | 230 W |
| Staple width | 10.6 mm |
| Magazine capacity | 50 pcs. |
| Weight | 1.2 kg |
- The telescopic working part allows you to reach hard-to-reach places;
- Universal charging system for nails and staples;
- Independent adjustment of impact force and depth;
- for parallel positioning of staples with remote-controlled stopper;
- It is connected to the mains using a cable (3 m).
- not found.
Price: from 3,000 to 4,200 rubles.
Furniture stapler Novus J-105 EADHG
I bought a furniture stapler because of an upcoming renovation. In order to save money, I decided not to throw away the old furniture and just re-upholster it. The stapler was very useful for this job. The cord is long enough that you don't have to worry about distance and won't need an adapter. The handle has a comfortable coating that prevents slipping in your hand. The hand does not get tired during long work.
Bison ZSP-2000
A power stapler is most often used as the main tool for stapling various types of materials. Bison" weighs several kilograms and is intended for a wide range of works, as it uses 15-30 mm nails and type 55 staples.
| Staple width | 6 mm |
| Mains power supply | 220 V |
| Weight | 1.6 kg |
| Beat frequency | 20 beats per minute |
- Light weight (1.6 kg);
- Magazine holds about 50 staples and nails
- 20 beats per minute;
- The impact force can be adjusted independently using an electronic type switch.
- Not found.
Price: from 3,100 to 4,200 rubles.
Furniture stapler Zubr ZSP-2000
An excellent stapler that I found in one of the DIY stores. My wife and I recently started renovating our house, and I decided that we couldn’t do without a furniture stapler. With it, you can turn an old and damaged chair into a brand new one in just a few minutes, just like if you bought it in a store. The operation is very simple and does not require special knowledge. Your hands will not get tired even after long hours of work.
Hammer Flex HPE 20
With this device you can quickly and securely attach fabric, paper and various wooden tools to all types of surfaces. This model has an ergonomic handle and weighs only 800 grams. It is connected to the mains using a two meter long cable.
| output power | 45 W |
| Beat frequency | 20 beats per minute |
| Power supply | 220V |
| Weight | 0.8 kg |
- Ergonomically shaped handle with low weight (800 g)
- Staples and nails can be used
- The power cord length reaches two meters;
- The number of staples remaining is displayed.
- not found.
Price: from 1,000 to 2,000 rubles.
Furniture stapler Hammer Flex HPE 20
My friend recommended me a furniture stapler of this particular model. At first I was not sure about the reliability of this type of fastener, but after the first use I felt a noticeable difference. At home, I used a stapler to cover the kennel with a special fabric that does not allow heat to pass through. It does its job well and securely attaches the fabric to the wood. Even if you pull hard, the staples will not fall out. My next experiment was reupholstering furniture with new fabric. It handles wood well, but sometimes the button gets stuck.
Hammer Flex HPE10
The electric stapler is sold in green color and is used as the main device in construction work. The machine copes well with fastening any type of fabric, cardboard, paper, wire mesh. It is capable of operating at speeds of 20 beats per minute or more.
| Power | 650 W |
| Number of staples | 300 staples |
| Staple width | 11.4 mm |
| Magazine capacity | 100 pieces. |
- Unusual design;
- The staple magazine is protected from unintentional activation;
- The rubber handle prevents slipping in the hand;
- One year warranty.
- not found.
Price: from 1,200 to 1,800 rubles.
Furniture stapler Hammer Flex HPE10
Good stapler. I have already tried it in all its capabilities, so I can confidently recommend it for purchase. I recently decided to start restoring old furniture. I didn't want to throw out my favorite sofa and several armchairs, so I decided to reupholster them. The stapler helped me complete this task in an hour. Good fastening is guaranteed. First of all, I was pleased with the convenient security feature that means you don't have to worry about leaving the device unattended. The power cord is quite long and allows you to comfortably work around the perimeter of an entire room.
RedVerg RD-ES53
The last device in our rating can be classified as semi-professional equipment, as it is often used in repair and construction work. An electric stapler supports staples and nails while you work. Thanks to the magazine capacity of 80 staples, the stapler can operate for a long time without refilling.
| Weight | 0.7 kg |
| Power | net |
| Consumables | staples and nails |
| Maximum travel speed | 20 beats per minute |
- Staples and nails supported;
- The number of staples and nails is measured so that the amount of material used can be controlled;
- Maximum number of hits 20;
- The power cord is two meters long;
- Convenient handle shape;
- Light weight (0.7 kg).
- not found.
Price: from 1,000 to 1,600 rubles.
Furniture stapler RedVerg RD-ES53
An attractive stapler for its price caught my attention in one of the construction supply stores. At first I didn’t want to buy it because I didn’t plan to renovate it, but then I thought about the state of the furniture in the cottage and decided to try to update it with its help. It's easy to use and not complicated at all. My wife loves the stapler too and can now use it to decorate various items in the pantry and shed.
Wortex ES 1053
The stapler is an electric stapler that runs on mains power. The low operating speed is compensated by a large capacity magazine. For large-scale work, such a device is much better than the previous representatives of this rating. Such devices can be found in furniture production; professionals value them for their unpretentiousness and high reliability.
ADVANTAGES:
- durable, lightweight
- adjustable impact force
- easy magazine replacement
- reliable protection against shots
- Suitable for hand staples, nails
DRAWBACKS
- Low quality paper clips included
Wortex ES 1053
Kolner KES 650
A convenient tool with high performance, one of the best in its category. Ideal for working with various tools - wood, plastic, leather, foil, fabric. Budget option: 1,500 rubles, lasts quite a long time - judging by customer reviews, there have been no breakdowns in 2-3 years. This option is one of the best in terms of convenience - weight 600 g, small size 22*6*16 cm.
Peculiarities:
- staples for driving 6-14 mm;
- driving nails up to 15 mm (Nails T and I);
- Up to 30 beats per minute.
Comparison table of characteristics
We suggest that you familiarize yourself with the table of the main technical parameters of all models from the rating. We hope that with its help you will be able to highlight your new knowledge and compare your favorite models.
| Model name | Weight, kg) | Power, W) | Power cord length (m) | Cost, rub.) |
| Novus J165EC | 1.64 | 230 | 3.5 | 5 000 – 7 500 |
| Novus J-105 EADHG | 1.2 | 230 | 3 | 3 000 – 4 200 |
| Bison ZSP-2000 | 1.6 | 2000 | 4 | 3 100 – 4 200 |
| Black&Decker KX418E | 1.8 | 1500 | 3 | 2 000 – 3 900 |
| Hammer Flex HPE 20 | 0.8 | 45 | 1.9 | 1 000 – 2 000 |
| Hammer Flex HPE10 | 0.9 | 650 | 2 | 1 200 – 1 800 |
| RedVerg RD-ES53 | 0.7 | – | 0.7 | 1 000 – 1 600 |
The best cordless staplers
Cordless staplers combine the strength and performance of corded staplers with the convenience of mechanical staplers. The disadvantage of cordless staplers is their slightly increased weight due to the weight of the batteries. It is also necessary to purchase additional batteries to increase battery life.
Makita DST112Z
The heavy-duty cordless stapler is designed for professional use. According to customer reviews, it is powerful, efficient and very reliable. In addition to the standard charge indicator and high capacity, it also features a convenient indicator light, a hanging handle and a lockable trigger. Improved ergonomics and minimal recoil, as well as an improved power system, are the latest developments of the Japanese brand. The disadvantage of the top specifications is the rather high price and the lack of a battery and charger as standard.
Pros:
- Increased power and performance;
- Well-designed ergonomics - comfortable for long-term use;
- Long service life and high build quality;
- All necessary controls and lighting of the working area;
- Two operating modes: multiplication and chain;
- Suitable for heavy work.
Flaws:
- High price;
- The battery and charger must be purchased separately.
RYOBI R18N18G-0
Featuring AirStrike™ technology, this cordless staple gun is smartly designed and technically advanced. It can work with staples (nails) up to size 300 and a maximum length of 5 cm. It works in two modes: single blow and quick blow, which allows you to choose the optimal speed for your task. The double step system reliably protects the workpiece from mechanical damage, and the improved idle shock prevention technology significantly extends service life. The user-friendly design makes it easy to load the step and remove stuck nails without the need for additional tools. This stapler is intended for professionals and large volumes of work, and its impeccable quality is confirmed not only by the brand image, but also by numerous reviews.
Advantages:
- two operating modes;
- Long operating time;
- Double plate;
- Excellent ergonomics.
Flaws:
- High price;
- Batteries and charger are not included.
BOSCH PTK 3.6 Li 0.603.968.120
An affordable cordless stapler from one of the leading brands is an ideal option for purchasing a tool for the home. It optimally combines reliable 30 ppm performance with a long battery life of 300 minutes. A 1.3 Ah lithium battery makes the tool lightweight and reduces the weight of the structure. The reliable German manufacturer has refined the design well; the tool fits well in the hand, has a slight inertial impact and is very convenient to use. The obvious drawback was the long charging time - 3 hours.
Pros:
- comfortable shape;
- Charge level indicator and capacious needle;
- Lightweight and powerful for its class;
- Battery included;
- Low price for a wireless model.
Flaws:
- It takes 3 hours to charge the battery.
MILWAUKEE M12
Made by an American company. The battery is connected to the handle. The handle has a non-slip coating, making it comfortable to use. Impact force can be easily adjusted using the thumb grip. The charge is visible from the side of the case. There are 4 LEDs that show the amount of charge. The device has a very high productivity (140 rounds per minute).
Price: 13,000-15,000 rubles.
MILWAUKEE M12 Pros
- comfortable grip;
- excellent magazine capacity;
- Convenient spout for placing the device in the right place.
Cons
- Heavy weight, bulky;
- high price.
Stapler MILWAUKEE M12
Principle of operation
The design of a construction stapler is extremely simple. Using muscle force (in mechanical models) or a motor (in electric models), the spring is raised upward. When the uppermost position is reached, the spring sharply expands. This force is enough to drive the staple/nail. When the lever is lowered, a new one replaces the old staple/nail and the process repeats.
It turns out that to hammer a nail you don’t need to make several targeted blows with a hammer - you just need to place the stapler where you need it and pull the trigger, your other hand remains free. It is convenient, fast and simple, which is why the tool has become so widespread. There is a misconception that a construction stapler can only hammer, but there are models that resemble a stationery stapler. They work with staples and are able to bend their legs, which is why they are used in the furniture industry and in decorative work.
A stapler is also called a stapler, tacker, nailer, staple gun, and staple gun.
The main advantages of a construction stapler:
- nailing materials does not take much effort and time, the process is automated and is carried out many times faster;
- the second hand remains free;
- installation can be carried out in the most difficult to reach places;
- vibration is not transmitted to the material, so you can easily work near glass elements without the risk of breaking them;
- the variety of fastening elements gives the tool versatility;
- safety. Unlike working with a hammer, you don't have to worry about hitting your fingers.
The best pneumatic staplers
Xzante
The Xzante pneumatic furniture stapler is powered by compressed air in a compressor. This tool is more efficient than mechanical and more reliable than electric. The compressor pressure is 4-6 bar. The stapler secures nails, straight nails, and U-staples with a light trigger pull.
The stapler is quite heavy, made entirely of metal, and the handle is rubberized for easy grip. A metal head can also be used instead of a hammer. The kit also includes a stapler that makes it easy to remove used staples.
Meite 1170
With its compact dimensions (208 x 168 mm) and a weight of only 600 g, the Meite 1170 pneumatic stapler is a useful tool for shoemakers and woodworkers. It can drive nails up to 11.7mm in diameter, as well as U-shaped and straight nails.
The stapler operates on compressed air under a pressure of 4-7 kg/cm2. To drive nails and staples, simply place the tool against the surface and gently pull the trigger. The stapler is fast enough that it can also be used for making furniture and shoes.
Meite 8016B
The Meite 8016B pneumatic furniture stapler is used in the production of upholstered furniture and footwear. The tool, with compact dimensions of 207×145 mm and a weight of about one kilogram, is characterized by high performance thanks to a compressor with a working pressure of 4-7 kgf/cm2.
The stapler is made entirely of metal and has a rubber coating on the handle. To drive staples and nails to the required depth, there is a trigger that you need to press lightly. The magazine can accommodate straight, curved staples and nails up to 10mm high.
WENXING F30
The WENXING F30 pneumatic furniture stapler is a powerful tool with a working pressure of 0.4 to 0.7 MPa for driving nails and staples into concrete. The stapler is used for fastening ceiling panels, making and reupholstering upholstered furniture and in everyday life.
The stapler runs on compressed air, so it is powerful, almost silent and does not require physical effort. With a light pull on the trigger, the staple or nail is driven into the surface, ready for stitching. The stapler kit also includes a container for lubricating parts with oil.
ERWERK ANG-05
The pneumatic stapler ERWERK ANG-05 with a working pressure of 3.5 to 5 bar is suitable for professional use and is a reliable assistant for furniture manufacturers and assemblers. The stapler has an all-metal body and a rubber non-slip grip on the handle.
Thanks to compressed air, the stapler is activated by lightly pressing the trigger. The magazine holds 4 mm staples and nails up to 22 mm long. The stapler is supplied with a hex wrench for maintenance and repair and a set of 300 staples.
Classification
There are many classifications of staplers. By type of consumables (staples, nails, multifunctional), by functionality (household, professional, semi-professional).
The main type of classification of devices is by type of operating mechanism.
It includes division into models:
They have a number of differences and features.
Electrical
An electric staple gun requires an electric drive as the force applied to bend the spring.
Has increased functionality. The staple is released after pressing the trigger lever. Then it returns to its working position.
The speed and force of a shot of a staple gun are quite different from their mechanical counterparts. The electric device is also capable of hammering large staples (up to 5 cm).
Electric staplers can be powered by mains or battery. This expands their working range.
Models of tools that are powered from the network must have a plastic case, a cord reinforced with a double insulating layer and special rubberized lining on the handle, since if the device is damaged, you can receive a strong electric shock.
Models with a rechargeable battery are mobile, but heavy. They can fire staples up to 30 mm long (up to 30 pieces per minute).
Mechanical
Mechanical staplers are the simplest, most functional and are used mainly in everyday life.
The principle of their operation is the need to apply a certain amount of hand force to the mechanism.
They have a number of subcategories based on type of construction:
Models with a coil spring have a weak impact and a short resource - 12,000 shots. The master can get tired quickly, since when hammering there is a strong impact in the hand.
A stapler with a spring or leaf spring is more convenient. It has a longer lifespan of shots - up to 75,000. It is easier to cock and has a powerful blow. There is practically no return when scoring.
Professional mechanical staplers do not have some disadvantages, for example they can pierce dense materials and withstand more load, but their price is comparable to their electric and pneumatic counterparts.
Pneumatic
Pneumatic models are the most powerful of the three.
They are used in workshops, in production and belong to professional equipment. Their strength is significantly greater than that of manual staplers and slightly greater than that of electric staplers. Their main difference is the use of compressed air. The working unit of the stapler is a pneumatic cylinder. Air enters it using a pneumatic distributor.
When choosing a device, you should pay attention to the operating pressure. It is this that changes the force of the blow. The average varies from 4 to 8 bar. The productivity of the tool is one shot per second. Most often it is filled with nails or studs up to 50 mm. When purchasing, you should pay attention to the air consumption per blow.
There are two types of pneumatic devices:
The first ones differ in that the air for impact is supplied after force is applied to the pedal. The latter have a trigger instead of a pedal.
The device does not require special care. O-rings most often need to be replaced, but they are inexpensive. The device requires periodic cleaning. The average weight of the mechanism is 1 kilogram, although it uses pneumatic devices.
Hammer stapler.
Hammer
The rarest type of construction staplers is hammer staplers. They work by striking a structure with a tool. Here it will not be possible to drive the staple as accurately as possible. But in some situations such a tool is extremely useful.
Safety precautions when using a stapler
When performing any construction work, it is important to follow safety rules.
Before using any tool, it is important to learn how to safely use a furniture stapler. It is important to pay attention to the following points:
- To ensure safety, especially at home, activate the safety lock after you have finished using the tool. This will prevent staples from being accidentally thrown out;
- When you pull the fabric against a flat surface as you work, make sure your fingers are a safe distance from the tool.
