How to start a Stihl ms 660 chainsaw

Starting STIHL 180

In order to start the STIHL 180 chainsaw when it is cool, you need to follow the method indicated by the manufacturer in the instructions for the STIHL 180 chainsaw, and specifically:

Turn on the ignition and set the engine control lever to the lowest position (in this position, the air damper of the STIHL 180 carburetor blocks the access of air from the air filter, and the throttle is completely open, thus enriching the fuel mixture);
Pull the starter handle a couple of times until the first flash passes (the flash indicates that the fuel mixture has entered the cylinder and the saw is ready to start);
Set the control lever one position up from completely lowered (in this position the air damper opens, and the throttle remains in the same position as before);
Pull the starter and start. The saw will start and operate at high speeds, due to the fact that the throttle valve is very open. To set the throttle to idle mode, you need to press the gas trigger and immediately release it, the tool immediately restores the speed.

The standard STIHL MS 180 chainsaw does not have any additional devices installed that can make starting easier.

Below you can see how to start a STIHL 180. The video carefully reflects all the main points, and the creator’s comments allow you to understand the whole process down to the smallest detail.

To sum it up...

Undoubtedly, every owner will be happy with this kind of purchase, since this technical “giant” will not only help you cope with construction or agricultural concerns, but will also cost you at an affordable price.

Do not doubt that if you choose a chainsaw from this particular manufacturer, you will not regret your choice for a second, since this tool will pay for all its costs over the years of its operation. Today, the price of a stihl 660 chainsaw (China) starts from 3,000 rubles or more. If you are interested in Russian-made chainsaws, go here.

If you have a replacement attachment for your Stihl chainsaw, then you can do anything.

Other characteristics

To really learn how to distinguish a fake German chainsaw, you need to remember the main characteristics of the MS-660. The “real” STIHL has the following features:

The tool is a high-power chainsaw and is intended for professional use.
Power – 5.2 kW.
Engine capacity – 91.6 cubic meters. cm.
Operating circuit type – OilomaticRapidMicro.
Weight – 7.3 kg.
Tire size – 500 mm.
Motor power – 7.1 hp.
Chain pitch is 3/8.
The weight-to-power ratio of the power plant is 1.4 kg/kW.

When choosing a Shtil MS-660 chainsaw, it is important to know how to identify a fake, because sometimes the cost of a copy reaches the level of the original product. The weight of a “real” tool is a little more than 7 kilograms, the power exceeds 7 horsepower, is intended for use in industry, and has a long service life. The cost of such a unit on the retail market starts from 45 thousand rubles

The Chinese copy may have similar dimensions, but the power will be 2 times less. The continuous operation time is lower, and the working parts and housing have weak strength

The cost of such a unit on the retail market starts from 45 thousand rubles. The Chinese copy may have similar dimensions, but the power will be 2 times less. The continuous operation time is lower, and the working parts and housing have weak strength.

How to choose an original instrument?

In the Russian Federation, only legitimate intermediaries can sell official STIHL products. It turns out that the original instrument cannot be purchased from private sellers. Official representatives of the German brand have a unique gray certificate, which employees are required to provide upon request of the client.

The MS-660 has a special sticker with the release number. It is duplicated on the chainsaw body in the muffler area. A similar index is indicated on the packaging. The numbers must be identical.

Each link of the working chain of the original model is marked in the form of the letter S. The STIHL company uses a minimum number of stickers on its tools (only on the handle of the chainsaw are the rules for safe use indicated). The STIHL corporate logo cannot be in the form of a sticker.

Interesting Facts

By following the above-mentioned differences between the fake and the original version of the saw, you can choose a high-quality tool and not overpay for a dubious copy. At the same time, there is one more aspect that allows you to further verify that the instrument was actually made in Germany.

German manufacturers adhere to a unique marketing policy. If official representatives in a country or a certain city sell products at a fixed price, then in all other places where original products are sold, the price should remain at the same level. Promotional offers and discounts work in a similar way, which apply to a specific model, regardless of the location of the dealer.

Let's sum it up

The only advantage of a Chinese copy with a STIHL sticker is its lower cost. In all other characteristics, the chainsaw is definitely inferior to the original model.

At the same time, the price of an inexpensive, low-quality tool with the logo of an advertised brand will be significantly higher than similar models on the market. Their technical characteristics and service life are practically the same, therefore, when choosing a chainsaw, you need to consider how often the tool will be used and for what purposes.

If you want to know how to spot a fake STIHL chainsaw, you should familiarize yourself with the typical characteristics of the MC-660 model. The following are the features of the German production tool:

Classification group - high-performance chainsaw for professional work.
The effective volume of the power plant (cc) is 91.6.
Power indicator (kW) is 5.2.
Engine power (hp) is 7.1.
Weight (kg) - 7.3.
The plant's weight-to-power ratio (kg/kW) is 1.4.
Operating chain type: Oilomatic Rapid Micro at 3/8 pitch.
Tire size (mm) - 500.

About the manufacturer Stihl

In the early twenties, the stihl company was born, the head of which was the unsurpassed engineer A. Shtil.
In the first years of its activity, the company was exclusively engaged in the production of steam boilers and washing machines. But apparently this was not enough for the manufacturer and chain saws began to appear from his machines. Today, this manufacturer is represented by a huge company, which consists of more than thirty enterprises located throughout the globe. The manufacturer began to produce motorcycles taking into account the fact that these products will serve perfectly for consumers, both for construction work and for gardening and household needs. And the most important thing that I would like to emphasize is that chainsaws of this brand are the best and most popular all over the world.

Chainsaw Shtil 660 is democratic and accessible. As a rule, the price of the Chinese chainsaw Shtil ms 660 ranges from 3100 to 5500 rubles. To see the rating of chainsaws for the dacha, go here.

STIHL ms 660 – Chainsaw STIHL MS 660 – how to distinguish a fake, characteristics

Chainsaw device "STIHL" MS 660

It belongs to the category of professional tools that cope with any logging work, regardless of the profile. It cuts even strong and wide trunks of old trees, not to mention young trees and branches. That is why it is chosen by those who know what real work is and appreciate the possibility of making it easier.

The design of such a gasoline unit is no different from other gasoline modifications.

After failure, do not repair the counterfeit STIHL chainsaw.

It might be a stupider waste of money than purchasing a fake if you take it for repairs.

The reason for constant breakdowns is the very low quality of the steel. Seizures in the cylinders come as an option from the factory; there is no point in listing other problems, especially if they make up 100% of the total volume of the product. The minimum that awaits you is replacing the pistons, which is very expensive and will only prolong the agony of this parody of a saw, which was damaged at the factory.

Features of the STIHL MC 660 chainsaw

reliability of an integral mechanism that allows it to overcome any load;
autonomy and mobility, which allows the device to be used in hard-to-reach places and areas without power supply;
the use of anti-vibration technology, which relieves the operator of the unpleasant trembling of the tool handles, which leads not only to fatigue and decreased concentration, but also to the occurrence of vibration disease;
an additional cutting blade brake provided by the design, which has an inertial operating principle. Designed to protect the worker from injury in the event of a rebound of the saw, therefore it triggers instantly even with a light touch of the hand to the protective shield;
side configuration of the chain tensioner - the tension screw lies on the side under the chain sprocket so that the operator’s hands do not fall into the plane of action of the chain itself and the stop teeth;
decompression equipment - after starting the engine, the compressed flow from the cylinder moves outward and exits through a specially equipped valve. This allows you to remove additional load on the starting cable, make it easier to start work and significantly extend the service life of the starting system;
the carburetor is equipped with a compensating device that guarantees not only uninterrupted engine operation, but also stable fuel consumption even when the air filter is heavily contaminated, which does not require constant cleaning;
“Ematic” technologies - an innovative automatic lubrication system, precisely adapted to the degree of load, which allows reducing oil consumption by up to half compared to other tools of the same class;
control is carried out using one lever;

Where do they sell fake STIHL chainsaws?

They can sell you a copy of the STIHL MS 660 chainsaw at shopping centers, in country houses and even in the courtyards of your home. The price starts at 100 and depending on your bargaining ability, it can drop to 50.

As a rule, scammers use the same story:

They used chainsaws to pay wages at a construction site or factory.
We bought a stolen shipment cheaply.
It was already purchased, but friends or mother-in-law gave me five more pieces.
You need to drink or urgently need money.
Lots of fakes on message boards.

If you need a chainsaw for a couple of days, and you are not going to cut down wood on an industrial scale, then a fake STIHL MS 660 chainsaw will be very useful to you. The Chinese fake, although of worse quality than the original, is quite capable of “cutting” wood; in ancient times, people coped with more meager tools. You don’t mind dropping it, throwing it, catching nails, etc. You can pour anything into the tank as long as it burns, and after it breaks, throw this chainsaw into the attic and forget it like a bad dream.

When demonstrating the operation of the product, it seems to you that the saw is good. This illusion is due to the fact that sellers fill the tank with pure gasoline. After the performance, the resource of the “unfinished business” is reduced by 50%. If you bought into the trick and purchased it, then use the saw as is, with the fuel that the seller filled in.

Features of the Chinese chainsaw "Calm"

Branded chainsaws of the Shtil brand are produced not only in Germany, but also in China, and, more specifically, in the city of Qingdao. values its reputation, so the quality characteristics of Chinese-made saws are at a high level. The enterprises carry out strict control over adherence to technology at every stage of production, and this serves as a guarantee of the identity of the assembly of products in Germany and China.

The fact of factory testing and the confirmed level of quality are marked with a “TR” or “QC” stamp for both Chinese and German goods.

However, Chinese manufacturers use materials of poorer quality, which to a certain extent affects the durability of the tool and limits its scope of application. The shortcomings in the appearance of parts made of Chinese plastic are clearly visible upon visual inspection.

When purchasing, you need to pay attention to the following signs of Chinese production:

The serial number printed on the tool will begin with the number 8. The numbers 1, 2 or 5 indicate the countries of origin: Germany, USA and Brazil.
The cost of the tool will be lower while maintaining the same warranty period.
The range of Chinese products includes products that are no longer produced in Germany.
Individual parts, for example, the air filter housing, are made of cheap, easily deformable plastic.

According to customer reviews, when using a Chinese-made tool, the following shortcomings appear over time:

Sawing headset malfunctions.
Rapid loss of elasticity of the starter spring.
Rapid formation of scoring in the cylinder.
Regularly decreasing power.
Failure of the saw bar and chain before the specified service life.

Nevertheless, purchasing a Chinese-made Stihl chainsaw can be justified if the purpose of using the tool corresponds to its capabilities. But the buyer must be aware of the origin of the product in order to consciously use the tool and correctly calculate the loads. In this case, the chainsaw is guaranteed a long service life to the complete satisfaction of the owner.

Starting without a starter

Often, many home craftsmen are interested in whether it is possible to power a chainsaw without the help of a starter. The answer is very simple: this cannot be done in principle.

None of the manufacturers have provided other alternative starting methods. Therefore, even if you remove the starter and try to start the car in some other way, it still will not work, since disturbances will occur in the cooling system. This system contains a volute to transmit the flow of cold air from the flywheel impeller towards the cylinder. If it is not there, the engine will overheat and eventually seize.

Description

The Shtil 660-ms chainsaw is a professional chainsaw for performing complex, heavy work with hard wood, equipped with a 50 cm saw bar. It can easily cut even such dense types of wood as larch, acacia, hornbeam, birch, yew and others. Designed for work of varying duration and complexity, it can be used for domestic purposes and as a professional working tool.

Chainsaw Stihl 660-MS

Distinctive characteristics of the Stihl 660-ms chainsaw:

the power of the two-stroke gasoline engine is 7.1 hp, which is equal to 5220 W;
moderate level of fuel and oil consumption;
ease of use in difficult conditions;
possibility of long-term operation even at low air temperatures;
the saw is as safe as possible to use if you follow the usage technique described by the manufacturer in the instructions;
The chain saw is capable of sawing logs with a maximum diameter of 50 cm or more.

Purpose of the Shtil 660-ms chainsaw:

cutting hardwood (sawmills, forestry enterprises, forestry departments);
processing of fruit trees with large branches;
clearing areas overgrown with wild trees;
construction of wooden structures (sheds, barns, saunas, baths);
if desired, the chainsaw can be used in homemade sawmills - this is evidenced by reviews from owners who have similar experience in operating chainsaws

How to start a saw after a long period of inactivity

I can’t start the chainsaw after a long period of inactivity. Such comments can be found on forums dedicated to the repair and operation of saws. Let's figure out how to start a chainsaw after a long period of inactivity.

The fact is that successful startup after downtime must be taken care of in advance and the saw properly prepared for storage. According to the manufacturer's instructions, before storing it, it is necessary to drain the fuel from the tank, then start the engine and burn out the fuel in the fuel system.

Preparation is necessary to ensure that the carburetor membranes do not stick together during storage. Performing this simple operation will allow you to successfully start the saw after long-term storage.

It is much easier to start a chainsaw six months after being idle if, immediately before starting, through the spark plug hole, add 1 - 2 ml of the fuel mixture to the cylinder. This can be done using a syringe.

Return under warranty and post-warranty service

Those owners of chainsaws who just received a new tool in the morning, unpacked it and assembled it in accordance with the instructions, but were unable to start it or the engine starts and immediately stalls, are especially distressed. Let us warn you right away - under no circumstances try to disassemble the new engine and do not tear off the warranty stickers. Under such circumstances, it is best to exchange the faulty chainsaw for another, or request warranty repairs.

Standard chainsaw equipment

In accordance with the legislation of most CIS countries (including Russia and Ukraine), electric and chainsaws are subject to return if faults are discovered that were not specified by the seller.

The buyer may also demand a reduction in the price of the defective product, reimbursement of the costs of its repair, or a refund for the defective instrument. The owner of the chainsaw can make these demands only during the warranty period, subject to compliance with all the conditions specified in the warranty card. As a rule, the buyer is given 14 days to identify all faults and shortcomings and contact the seller.

Reasons why the chainsaw does not start

The tool must be launched strictly according to the instructions. But if you have completed all of the above steps, and the saw still does not start, this means that there is something wrong with it. There are several reasons why it may not start:

no spark;
fuel is not supplied;
air filter clogged.

So, what should you do to identify the real reason why the tool is not working?

Firstly, it must be said that if the tool does not start, the screws on the carburetor must under no circumstances be turned. And if you are not a professional in this field, then do not even try to adjust anything with your own hands or try to start the instrument.

The steps listed below, necessary for the tool to start working, must be performed in the strictly specified sequence. You need to start performing the next step only when the previous one did not work. The actions are:

At first, you can try simply not doing anything with the tool for at least 5-10 minutes. There is a possibility that the spark plug was flooded during starting, which sometimes happens. Wait, then try again following the instructions;
Try removing the tool housing cover, then remove the air filter from there, and try starting the saw without it. If the filter becomes dirty, wash it in soapy water, then dry it or replace it with another one;
Unscrew the spark plug and check if there is a spark. If it is missing, then you can try installing another one. If a spark does not appear in the end, this indicates that the ignition unit is damaged and the tool needs to be repaired. If there is still a spark, but you still can’t start the chainsaw, proceed to the following steps;
If there is a spark, but the spark plug is wet, then the chainsaw needs to be turned over. Thanks to this, excess gasoline will pour out of the cylinder, if there was any there. You need to pull the starter without a spark plug about 10-15 times, this will allow you to ventilate the combustion chamber. Fire up the spark plug and then screw it back in. If possible, change it to another one, try starting the tool again;
If the spark plug is dry, then you need to take a syringe and fill it with one or two cubes of the gasoline mixture, then pour it into the cylinder. Try to operate the tool again. There is a possibility that a small speck has entered the carburetor and is preventing fuel from entering the combustion chamber. Such a speck can be pulled out using the flow that is formed after starting the machine by adding fuel directly to the cylinder itself;
Unscrew and remove the muffler. But at the same time, try not to damage the gasket between the engine and the muffler. Once again we try to start the chainsaw without an air filter and muffler. When it is not there, you can study the piston from the inside. If there are burrs or burrs on the piston or on the cylinder walls, or if the piston ring is pinched by burrs, then this indicates that the piston is worn out or broken. This often happens if you don’t add enough oil to the fuel mixture. In this case, the only way out is to take the tool to a service center or buy a new one, since replacing the piston will be much more expensive.

The above material discussed how to properly start a chainsaw using the example of one of the Calm models, as well as how to behave if the tool cannot start. If you are new to this business or are faced with a problem, then this information may be useful to you in the future.

STIHL MS-660 chain saw: how to spot a fake

In Russia and other CIS countries, gasoline saws of dubious quality from China are widely used. Moreover, there are counterfeits disguised as well-known brands. Accordingly, the price of a tool that is cheap actually increases several times. How to calculate the original STIHL MS-660 saw? How to distinguish a fake? Here you need to be guided by certain positions, thanks to which it is quite possible to determine whether it is a copy or a real German saw.

Operating and starting instructions for the MS Shtil chainsaw - how to start the device

When putting the device into operation, it is important to remember the following aspects:

Before you start working with any kind of chainsaw, including our model, you need to take into account certain precautions, which we will talk about in this section. This is actually an important point in the work, since the chainsaw is operated at high speed, unlike an ax or hand saw, and the teeth located directly on the saw are quite sharp.
Most importantly, before using any tool in practice, read the instructions first , in which you will find detailed information about what and how to do so as not to harm yourself and others. Therefore, if you are currently using a tool, you must turn it off and place it at a safe distance so that it does not disturb anyone. If the saw is new, you definitely need to break it in; see how to break in a new chainsaw here.
You can give this device for use only to those people who have previously encountered this model or know how to use this type of chainsaw, since you are responsible for unforeseen accidents that threaten other people. Moreover, you can only use a chainsaw at certain times of the day, as it makes loud noise and can disturb people around you. You can agree on these kinds of regulations with the people who live in the area where you work.
Immediately before work, you should be well rested and not tired in order to be able to fully control both the saw and the surrounding environment. Before you start using this device, you must undergo a medical examination, which will determine whether you are allowed to work with this kind of tool, since there are cases when a person does not have the right to pick up a chainsaw and manipulate it for health reasons.
It is forbidden to use the saw after you have taken any medications that affect or inhibit the nervous system, as well as after drinking alcohol. In addition, it is very dangerous to operate a saw during rain or snow, as the rate of accidents increases. Activities should only be carried out in calm weather.
This tool is intended for sawing wood materials only and should not be used for any other purpose.
It is also important that replacement parts must be exclusively from the same manufacturer that manufactured the saw.
This applies in particular to guide bars, cutting tools, accessories or saw chains. Otherwise, you may injure yourself and others, or damage the device itself. The manufacturer of this brand insists that original tools of its brand be used. Since they are specially designed taking into account all the technical characteristics of the saw, and also fully meet all the necessary and important requirements.
Under no circumstances make any modifications or changes directly to the design of the saw itself , as you are exposing yourself to danger with your own hands. Remember that the company is not responsible for damage caused to you, or accidents with other people and property, if you use, let’s say, “foreign” spare parts, that is, not “native” ones. And finally, remember that strong water pressure can damage chainsaw parts and components. If this happens and the new chainsaw does not start, then contact one of the service centers in your city.

How to adjust the carburetor on chainsaws

To understand how to properly adjust the carburetor on a chainsaw, you need to see it, and therefore we invite the reader to pay attention to the example below. PHOTO: rmnt.ru Arrows indicate the carburetor adjusting screws. PHOTO: rmnt.ru Arrows indicate carburetor adjustment screws

PHOTO: rmnt.ru Arrows indicate carburetor adjustment screws

To make the adjustment, you only need a slotted screwdriver, but it will not be possible to perfectly accurately adjust the carburetor without a tachometer (of course, if the person is not a mechanic or an experienced professional driver). Now let's try to understand how to adjust the carburetor in a given situation.

PHOTO: shukur.ru Such a slotted screwdriver is quite enough to adjust the carburetor of a chainsaw

How to adjust the carburetor of a chainsaw if it doesn’t start at all

A fairly common problem in cases where a “master” from the “I know everything” series tries to get into the settings with hands that do not grow from his shoulders. In such a case, there are standard screw positions from which you can “dance” further. First you need to tighten both screws completely (don't be too zealous). Next unscrew:

screw L – one turn;
screw H – one and a half turns.

PHOTO: withoutahitch.com.au Each screw is marked, and there are holes in the housing for adjustment

As for the idle speed screw, the throttle must first be completely closed (screw T turned out). After this, you need to turn it one and a half turns clockwise and try to start the engine. If it doesn’t work, gradually add a quarter turn at a time until starting. When the engine starts running, the position of the idle screw is adjusted so that the internal combustion engine does not stall, but the chain remains in place.

PHOTO: xoznik.ruAfter this, you need to start the engine and let it run for 8-10 minutes. During operation, preliminary adjustment of the idle speed is possible. When the engine is warm, you can begin fine tuning.

Purpose, design and principle of operation of the carburetor.

A carburetor is needed to prepare the air-fuel mixture to power the engine. If the proportions in this mixture are incorrect, the operation of the motor is disrupted. If the proportion is not observed in the direction of increasing the amount of fuel, the mixture is called oversaturated, but if, on the contrary, there is little fuel, it is called lean. Both have a negative effect on engine performance.

In different models of chainsaws, carburetors differ in design, but they are similar in principle of operation. The air flow moves at high speed along the air channel. The damper that blocks the channel allows you to change the speed of the air stream. The fuel is supplied through the atomizer into the channel, where it is mixed with the incoming air, forming an air-fuel mixture. The resulting mixture enters the engine.

The pressure in the float chamber, where the fuel is located before mixing, is almost equal to atmospheric pressure. But a vacuum is created in the air channel, due to which the fuel is drawn into the air flow. The more the damper opens, the faster the air moves, and the amount of fuel also increases - the engine speed increases. This is how you can imagine the principle of operation of a carburetor in a simplified way.

For efficient, smooth operation of the tool, obtaining maximum output and at the same time economical fuel consumption, you need to adjust the carburetor of the chainsaw. Before adjusting, you need to check the fuel and air filters - they must be clean. On most chainsaws, adjustment is carried out by three screws: idle, high speed, low speed. The following signs indicate that the carburetor is correctly adjusted:

The chain does not move at idle.
The engine accelerates smoothly and quickly.
The sound of the running engine is smooth, similar to the sound of a four-stroke engine.

When adjusting the carburetor, you need to treat it with all possible care, because errors in the settings can lead to very serious consequences, including engine malfunction. If you are not 100% confident in your abilities, you need to contact a service center.