Rating of the best balancing machines and stands for 2022


Place Name Characteristics in the rating
Top 5 best balancing machines
1CORGHI EM 9250 CompactLine PREMIUMThe best compact machine
2START Sivik SBMK-60 EReliable budget model
3PULI PL-6579WREasy to understand calibration
4NORDBERG 4523A10 balancing modes
5SOROKIN 15.21Manual calibration

Trucks, motorcycles, cars, buses - everyone needs balancing of wheels that suffer from driving on bumpy domestic roads. Therefore, specialized machines are indispensable equipment. They return the wheels to their original shape, bringing the center of mass as close to the geometric center as possible. The result is safe driving in any vehicle.

The design of all balancing machines is almost the same. The difference in price is due to the location of production and additional features. The most standard model looks like a case with a table and weights. From technology - a monitor or display on which the test results are displayed. However, the level of automation, size and weight of the wheels being serviced are different. Somewhere the user sets the parameters, expensive models do this themselves. There are programs that tell you the distance of the weights, sometimes they add automatic descent and stopping of the wheels. We have collected the 5 best models of all price categories, both the most sophisticated and the simplest.

An indispensable attribute for the service industry

Previously, such nuances were resolved using a static method. It is understood that the wheel was put on a special rod, after which it was untwisted. Stopping points were marked. To determine the area of ​​imbalance, such manipulations were repeated several times. It could take all day to service one vehicle. In addition, it should be noted the high level of error, which was overcome years later. How often do you need to use such services?

According to ordinary people, if a car regularly drives on city roads, then it is necessary to contact a car service center at least once every six months. Such trips coincide with the seasonal replacement of tires, which allows you to save money. However, if the vehicle often drives off-road or in the suburbs, it is recommended to visit the machine once every few months. Balancing has a beneficial effect not only on the operation of the “wheels”, but also:

  1. Crankshaft.
  2. Cardan shaft.
  3. Compressors.
  4. Pulleys.
  5. coupling
  6. Rotorov.

The point is that debugging can be aimed at the functioning of individual elements of the machine. How to understand that such manipulations are necessary? For those who have only recently driven, this question is more than relevant. In order to avoid making common mistakes, you need to pay attention to how the car drives at speed and whether there is vibration in the steering wheel area. These bells are the first thing a motorist should pay attention to and visit a tire shop in the near future.

Experts advise balancing after each wheel falls into a large hole. If the impact is really strong and there is visible deformation of the disc, then you simply cannot do without stands. In addition to leveling the damaged surface, you should seek the services of specialists.

Timely contact with specialists will help to avoid many problems, including:

  1. Deterioration of the suspension condition.
  2. Accelerated wear of the wheel bearings.
  3. Tire tread wear.
  4. Increased loads on the steering.

The main task of a tire service worker is to identify imbalances and eliminate them. In this case, compensating loads on certain areas of the disk are eliminated. In addition to the employee’s personal experience, an important criterion is the availability of high-quality equipment from the world’s best manufacturers. The average cost of work will depend on the diameter of the wheel. An amount of 200 rubles does not seem that big, especially when it comes to the safety of yourself and others. What are the settings?

Equipment check

Before you purchase a particular balancing machine, you will need to check it. To do this, you will need to balance the wheel, and add about 30 grams in any place to create an imbalance. On the next cycle, the balancing should show no more than 30 grams. If the indicator differs, the machine needs to be calibrated.

Such equipment is calibrated approximately once every six months , since the balancing shaft loses a little weight during the season due to friction on the wheels.

Types of equipment

Popular models designed for passenger cars are in greatest demand. During rotation, the X and Y axes of the wheel must remain unchanged. Otherwise, the centrifugal force will be directed to other elements of the car. An imbalance may occur due to encountering a serious bump, hole, or other type of load. When considering situations related to trucks, one should add to the general list the excessive vibrations of the body itself that occur during the transportation of goods. Such moments negatively affect the suspension and service life of the tires.

Installations intended for trucks are classified as specialized. It will not be possible to perform the assigned tasks on conventional machines. In addition to more accurate recognition of balancing, they can significantly increase the service life of tires and other elements of the car. After a series of successful manipulations, vibrations on the body become less, the load on the chassis and hub decreases, and an increased smoothness of the ride is observed. Unlike conventional stands, machines for trucks are equipped with a reinforced frame.

Purpose of the equipment

Balancing machines are designed for balancing wheels of different vehicles:

  • passenger cars;
  • freight transport;
  • motorcycles.

Wheel balancing is very important because if a spinning wheel is not balanced (its center of mass and geometric center are not aligned), it causes strong centrifugal forces that increase vibration, causing tire wear and chassis and suspension failures.

Nowadays, not a single car service center operates without balancing machines. After all, it is necessary not only to properly disassemble and reassemble the wheels, it must also be balanced in the correct way . Modern equipment can work with disks of different configurations; it has several operating modes.

How does it work

Without equipment of this type it is extremely difficult to imagine a modern tire service. Even in small workshops there is room for a device that will take up to 3 square meters. m area. Preliminary strengthening of the foundation is also not required. The base of the structure is reinforced. On one side the shaft for the wheel is mounted. A protective casing is attached to the top. Depending on the power of the electric motor and the dimensions of the casing, the size of the wheel that is attached to the stand depends.

The principle of balancing is to spin the wheel, which detects axle deviations during rotation. This happens differently in each model.

For convenience, below is a comparative table with an overview of the main indicators.

type of driveDescription
AutoThe best solution for most enterprises in this service sector. The necessary operations are performed automatically - by machine. The wheel is spun by a shaft. Measurements are carried out using an electronic ruler. Detected deviations are displayed on the monitor. After a short processing of the data, the installation locations of the weights are determined automatically, as is their weight. Voice commands can be used for greater control convenience.
Semi-automaticThe tire spin-up also occurs automatically. No outside efforts should be made for this. Regardless of the brand, data will have to be entered into the computer manually.
ManualThe shaft is untwisted manually. To measure basic parameters you will need a mechanical ruler. The information received is compared with the GOST manual on deviations.

What should you pay special attention to when choosing popular models? On the manufacturer, consumer reviews and the cost of the basic kit. Most modern enterprises rely on the quality of equipment, thereby reducing the number of employees. In this case, preference should be given to expensive and fully automated designs made in Russia or China.

Such devices are capable of identifying problems in one cycle and eliminating them if necessary. During a work shift, you will be able to serve more clients, which means your income will be higher. Customers spend less time visiting a service station, which means they will prefer to return there again.

Rating of high-quality and inexpensive balancing machines

AE&T B-500

The model is used to troubleshoot the wheels of passenger cars, small trucks and motorcycles. Operates in static and dynamic mode. An excellent solution for small and developing centers. It is based on advanced technology that allows all necessary manipulations to be carried out in one cycle, even if the weights are placed close together. In addition to the calibration mode, there is the ability to work with alloy wheels (three modes). The panel is equipped with a large and convenient display.

In terms of price, such a kit is beneficial, because the purchase will cost 48,000 rubles.

balancing machine AE&T B-500

Advantages:

  • after lowering the casing, autostart occurs;
  • numerous operating modes;
  • automatic calibration function;
  • modern technology for installing weights and taking measurements;
  • data input via measuring arm;
  • presence of dynamic and static mode.

Flaws:

  • no significant ones.

START Sivik SBMK-60 E

The model belongs to the budget category. In addition, the device positions itself as reliable and extremely easy to use. It should be noted that the operator may not have proper work experience. There is a proprietary protection against power surges - “power guard”. To start the system, you must press the corresponding button or close the cover. The electronic ruler is responsible for determining the diameter and distance. A special sensor is responsible for the amount of work performed. Based on numerous reviews, the 40 mm spindle unit deserves special attention.

You can buy the device in the online store at a price of 52,000 rubles.

balancing machine START Sivik SBMK-60 E

Advantages:

  • strength;
  • build quality;
  • ergonomics;
  • The set contains different-sized cones, calipers and a casing;
  • warranty – one year;
  • noise reduction option.

Flaws:

  • "split" with limited functionality.

SOROKIN 15.21

Used for servicing trucks, cars and motorcycles. The installation is intended for medium and light workload. The active flow will not work for the model. The information can be viewed on the display with a Russian interface. When installing weights, a sound alert occurs. The program is launched after entering the data. Calibration is carried out independently by the operator. The noise level is 70 dB, which is considered acceptable. The display diagonal is 24 inches, which allows for visual and information control.

Cost – 53,000 rubles.

balancing machine SOROKIN 15.21

Advantages:

  • convenient display;
  • In the kit you can find calipers, pliers, a flange, clamping nuts and cones;
  • insignificant error of 1 g;
  • eliminates both dynamic and static imbalance.

Flaws:

  • parameters are entered manually;
  • build quality.

AE&T B-520

The unit is capable of servicing wheels with a diameter of 10-24 inches, which are used by light trucks, cars and motorcycles. This is the best model to buy for working with alloy wheels. It is characterized by the output of indicators of increased accuracy during self-calibration and routine diagnostics. Measurements are carried out automatically. The control panel is equipped with a color display, cells and a work table where weights are placed. The shaft is made of high-strength materials and has an increased strength index. There are three separate programs for working with aluminum wheels. There is also a static and dynamic mode. Automatic start when lowering the cover.

How much does the model cost? The purchase will cost 62,000 rubles.

balancing machine AE&T B-520

Advantages:

  • automatic ruler for measurements;
  • high-precision equipment with minimal error;
  • high strength shaft;
  • separate modes designed to work with alloy wheels.

Flaws:

  • not identified.

AE&T B-820

This new product in the world of balancing stands has a modern appearance and a set of characteristics that will help a novice mechanic start his own business. Works with 10-24 inch wheels, which is considered standard for small trucks, cars and motorcycles. Designed to work with cast structures. It is characterized by the presence of a high-precision apparatus, which is used to install self-adhesive weights. Excellent performance was revealed both during self-calibration and diagnostics. The computer makes the measurements independently. The product is equipped with a color display, special cells for weights and a work table.

The purchase will cost 87,000 rubles.

balancing machine AE&T B-820

Advantages:

  • stability;
  • steel body;
  • automatic ruler;
  • high-precision equipment;
  • accuracy and strength of the shaft;
  • separate program for alloy wheels;
  • precision in working with weights.

Flaws:

  • not identified.

Best balancing machines for trucks

Truck wheels can weigh up to 130 kg or more, so truck tire fitting is a separate industry and is more expensive. To work with larger masses, special balancing machines are used, and here are the best of them.

Stankoimport ST-200A (T)

Rating: 4.9

Balancing equipment for trucks from Stankoimport is manufactured in China, and therefore has a more affordable price than its Korean or European counterparts. The ST-200A (T) machine is connected to a 380 V network and consumes a power of 0.5 kW. Its own weight of 332 kg makes it motionless when turning large wheels with a maximum weight of up to 130 kg. The acceptable diameters for wheels are from 10 to 24 inches. With the largest balanced mass, the error is 5 grams, which is not bad considering the dimensions. There are three balancing modes for operation. The large trolley on casters with a frame and adjustable height makes it easy to install the wheels on the shaft. Reviewers like the advanced system for entering control commands.

A huge machine for balancing truck wheels is included in the list of the best because it works with a volume level of 70 dB, like a model for passenger cars. For this, all the tire workers who are forced to be in the same room from morning to evening will thank you.

Advantages

  • powerful trolley on rollers;
  • pins for hanging a set of cups;
  • many cells for small things;
  • quiet work.

Flaws

  • connects only to 380 V;
  • Manual distance input.

BT-850 AE&T

Rating: 4.8

This wheel balancer is also sold with a pneumatic lift, making it easier to mount large truck wheels. To control the machine, there is an LCD monitor and rubberized keys that are easy to press even with work gloves. In total, the program block contains three main scenarios. All measurements are made automatically for both dynamic and static balancing. Craftsmen like the machine because it accurately detects where the weights are attached, even if they are located close to each other on different sides. The machine performs all calculations in one cycle, which increases productivity.

According to the editors, this is one of the best balancing models in terms of price and quality ratio, although it is assembled in China. The machine is also capable of working with a weight of up to 150 kg, which not all competitors in this category can do.

Advantages

  • large protective cover;
  • a practical trolley for connecting the disc hole to the shaft;
  • stable operation of the microprocessor responsible for control;
  • automatic determination of parameters;
  • dynamic and static balancing possible.

Flaws

  • A three-phase network is required.

Nordberg 45TRKE

Rating: 4.7

And here is another electric balancing device for working with wheels weighing up to 150 kg from the Nordberg brand. The machine is connected to a voltage of 380 V and makes from 100 to 200 revolutions per minute. The maximum permissible wheel diameter allowed by the manufacturer is 40 inches. The disc width can be up to 510 mm, so the machine can cope with the chassis of KAMAZ, MAN, Volvo and other trucks. To get started, the operator needs to measure the tire width and offset, enter the data into the program and press Start. Calculations occur on both sides at once, but due to manual input, the machine is considered semi-automatic.

We noted the balancing time of the huge wheel to be 7 seconds. For work on truck chassis, this is a fairly short period of time, which helps improve productivity in the tire shop. This characteristic is especially relevant if the car service operates next to a highway along which trucks often pass.

Advantages

  • comfortable handles on the clamping nut;
  • pneumatic trolley;
  • large protective cover;
  • Works with weights up to 150 kg.

Flaws

  • a thin pedal that your foot often slips off;
  • all menus are in English;
  • error 10 g;
  • connects only to a 380 V network;
  • manual measurement of distance and width.

TOP best balancing machines in the mid-price segment

PULI PL-6579WR

A well-known branded product from a Korean manufacturer, its work is based on the latest integrated circuits. It is a full-fledged diagnostic complex that displays information in real time. Equipped with a 15-inch display. The operating system of the design is of its own production, which indicates the high accuracy of the measurements taken. Weights are added automatically; for this, the machine stops the wheel. The rotation of the shaft is recorded separately. The laser pointer is responsible for the correct position.

Cost – 95,000 rubles.

balancing machine PULI PL-6579WR

Advantages:

  • illumination of disks during the verification process;
  • automatic start, stop and suspension of weights;
  • over 10 modes;
  • durable body;
  • clear controls;
  • self-adjustment of the tire.

Flaws:

  • price.

AE&T B-600

A high-quality product from a well-known and time-tested manufacturer. In addition to modern design, it should be noted that there is a set of programs that can cope with the indicated functions. Responsible for balancing the wheels of cars, trucks, and motorcycles in both static and dynamic modes. An excellent solution for new and small service stations. A two-contact measuring ruler is responsible for the placement of balancing weights and measurements. The “autoprogramm” option helps set the layout. Illumination is provided by LEDs located on the housing. The computing unit is built on a Texas microprocessor, which belongs to the high-performance category. The electromagnetic brake significantly reduces the time available to stop the wheel.

Cost – 99,000 rubles.

balancing machine AE&T B-600

Advantages:

  • electromagnetic brake;
  • memory function;
  • presence of a laser navigation system;
  • LED lights;
  • two-coordinate measuring system;
  • option "autoprogramm";
  • "moto" function;
  • digital display.

Flaws:

  • not identified.

AE&T B-823

A modern device that allows you to balance passenger car wheels. Equipped with surge protection and self-diagnosis. The machine quickly identifies any faults and displays them on a convenient display. The interface of the application used deserves special attention, which will be understandable even to a person who has not previously dealt with such equipment. There are several operating modes, which will help you cope with everyday tasks without difficulty. Markings and self-calibration are carried out by the system.

Price – 101,000 rub.

balancing machine AE&T B-823

Advantages:

  • numerous operating modes;
  • interface;
  • automated ruler;
  • display;
  • assembly;
  • speed of work;
  • quality of manipulations.

Flaws:

  • small wheel diameter.

NORDBERG 4523A

It is this kind of company that is better to buy automated equipment if the company has sufficient funds. One of the main selection criteria is the characteristics, and this model is excellent. We are talking about the distance, width and diameter of the elements being served. All necessary information is displayed on a convenient 17-inch liquid crystal display. Operates on a voltage of 220 V. Assembly and production of key elements takes place in China. However, already assembled equipment is tested in Europe, as evidenced by the relevant certificates. In the set, a potential buyer can find a meter, compass, pliers, weights and nuts.

Price – 114,000 rub.

balancing machine NORDBERG 4523A

Advantages:

  • high-quality set with everything you need inside;
  • low noise level (70 dB);
  • Comfortable size LCD display;
  • table with separate compartments for weights;
  • a separate program is responsible for the hidden installation function, which is mounted in a niche located near the wheel spokes;
  • optimization of tire position;
  • self-calibration;
  • self-diagnosis;
  • workplace lighting;
  • versatility (suitable for both a small workshop and a large service station).

Flaws:

  • not identified.

AE&T B-829

Popular model from a well-known manufacturer. An excellent choice for small and semi-professional workshops that service cars and other small vehicles. Provided that the company’s budget allows, then preference should be given to high-quality and time-tested equipment at an affordable cost.

The average price is 119,000 rubles.

balancing machine AE&T B-829

Advantages:

  • self-diagnosis;
  • protection against breakdowns and power surges;
  • system input of three main parameters;
  • ruler included;
  • numerous modes;
  • comfortable LCD display of optimal size;
  • system marking and calibration.

Flaws:

  • not identified.

Master Tires MT-1200

The balancing structure is designed for servicing trucks. It should be noted that there is a pneumatic lift, which is so necessary for working with large equipment. Allows you to identify imbalances of both truck and passenger wheels. It is distinguished by the presence of a powerful microprocessor, which has an error of 0.005 kg.

Cost – 142,000 rubles.

balancing machine Master Tires MT-1200

Advantages:

  • high-speed processor with a stable clock frequency;
  • A durable casing is provided for operator safety;
  • error codes during calibration are displayed on the screen;
  • built-in pneumatic lift;
  • clear interface.

Flaws:

  • none.

Selection of balancing machines

You should choose such equipment very carefully, since the success of the service depends on it. The balancing process must be correct and accurate, this will only add maximum clients to you.

The price range of such equipment is very wide; it differs from each other in quality of work, functional features and other factors. It is necessary to make sure that the device has a quality certificate and has one or another warranty period.

You need to choose this or that equipment wisely. Be sure to consider whether expensive equipment from European manufacturers will pay for itself. Domestic or Chinese models have a more reasonable price; perhaps, for a particular business, they will be quite sufficient. Consider the load level of the service, as well as how often you serve customers in a particular type of vehicle.

Chinese models

Naturally, not every owner of a car service or tire shop is ready to invest heavily in the business. The main task for many is to get maximum profit with a minimum investment.

Chinese equipment in this regard is the most suitable option, since it is inexpensive. But it has its own technical features. Such machines are very simple in design, most of them are copies of old models from well-known manufacturers; you should not expect anything supernatural from the equipment. They involve technologies that are approximately 10 years old. But they will still work properly, thanks to which you will “recoup” your investment in about 1-2 seasons of operation.

Italian equipment

Now there are many Italian-made models on the market, which are significantly superior to Chinese machines. They guarantee high quality work and reliability.

One of the most well-known manufacturers of tire fitting equipment is Sicam , which is reviewed by car owners and tire shop owners. And also this equipment has been on the market for many years; if you choose it, you definitely won’t go wrong.

Rating of the best premium balancing machines

CORGHI EM 9250 CompactLine PREMIUM

One of the highest quality products on the modern market. However, the quality completely justifies the cost. If necessary, the model can be ordered online directly from the manufacturer’s website. Allows you to identify imbalances in minivans, motorcycles and cars. The operator’s work is simplified as much as possible due to built-in programs that independently work with weights on the tire. All necessary information is displayed on the LED backlit panel. The disk is shown in section, after which the system independently determines the plane of placement of the balances.

Cost: 220,000 rub.

balancing machine CORGHI EM 9250 CompactLine PREMIUM

Advantages:

  • build quality;
  • speed of implementation of necessary manipulations;
  • a time-tested product from a renowned brand;
  • Sensors are responsible for reading data;
  • standard body color;
  • processing tires weighing up to 75 kg;
  • if necessary, you can purchase auxiliary stands designed for wheels of larger diameter and size;
  • reinforced rotation drive;
  • the ability to use four wheels simultaneously;
  • three types of cargo.

Flaws:

  • not identified.

John Bean B9200

An excellent solution for small businesses and small workshops that have just begun their path to universal recognition. According to most experts, such a purchase is an integral step to success and high income. The design allows you to carry out the necessary manipulations in a short period of time, without much loss of labor.

Price – 430,000 rub.

balancing machine John Bean B9200

Advantages:

  • comfortable placement of weights and other balances;
  • convenient display that displays the necessary information;
  • application of VPI technology (virtual planes);
  • after measurements, the system turns on the brake;
  • hidden placement of weights;
  • identifying the exact location of the problem;
  • semi-automatic diameter and insertion measurement;
  • ergonomics;
  • equipment;
  • there is no need to purchase lifting equipment;
  • mobility.

Flaws:

  • manual drive for tire rotation.

HOFMANN GEODYNA 7600L

A frequent visitor to tire shops, city service stations and dealerships with a high and medium volume of daily work. An excellent solution for servicing motorcycles, SUVs, minibuses, small trucks and cars. The system independently makes a preliminary selection from the list of available modes. To simplify entering information and setting balances, backlighting is used. The monitor is built-in, touch-type, with a convenient graphical interface.

Price – 468,000 rubles.

balancing machine HOFMANN GEODYNA 7600L

Advantages:

  • convenient tire mounting;
  • start-stop (short cycle);
  • accelerated data processing time;
  • VPM technology;
  • a wide choice of programs;
  • balancing cover;
  • the rim is equipped with lighting for easy cleaning;
  • EasyALU function;
  • Smart Sonar;
  • fast data entry;
  • accuracy of measurements and problem area;
  • touch monitor.

Flaws:

  • not identified.

Hunter GSP9700 with Road Force Measurement system

A balancing stand that contains all the necessary characteristics and functional features that truly high-quality balancing stands should have. Both lateral and radial impact on the disc are measured, after which the system makes recommendations to solve the identified problem. Such aspects may concern both the chassis of the machine and other key elements, for which conventional equipment may not be enough to eliminate the problem. It is rightfully considered the best equipment for determining tire slip forces, measuring basic indicators, balancing quality, loaded runout and radial forces.

Price – 1,018,000 rubles.

Hunter GSP9700 balancing machine with Road Force Measurement system

Advantages:

  • Wheel Countering Check option;
  • after pressing the pedal, information is instantly transmitted;
  • Split Weight mode;
  • laser pointer;
  • Split Spoke mode;
  • tire stability on the machine.

Flaws:

  • not identified.

HOFMANN geodyna 9000P

The installation is used in professional workshops, service stations and dealership centers, where there is an endless flow of customers. The system first checks the level of the tire and its correct position on the rim. The axial and radial runout of the tire and wheels is also measured. The system checks the tread pattern, which is then displayed on the screen. In the set you can find auxiliary clamps of the electromechanical type. The screen is wide, built-in and color.

Price – 1250000 rub.

balancing machine HOFMANN geodyna 9000P

Advantages:

  • the ability to manually adjust geometric fit and smoothness;
  • contactless input of necessary information;
  • VPM technology;
  • checking the axial runout and radial runout of the tire and disk;
  • the correct fit of the tire is checked by the system;
  • search for damage to the side element;
  • search for flat wear;
  • easy to use program;
  • the ability to use equipment without prior training;
  • numerous programs and settings;
  • color and wide monitor;
  • clamping device included in the set;
  • diagnostics (data) are saved automatically;
  • printout of measurements;
  • degree of tire wear.

Flaws:

  • none.
Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]