The best renovator models of 2022: battery-powered, budget, multi-tools, how to choose, comparison

Author of the article: Vinogradov Dmitry Alekseevich

*Review of the best according to the editors of simplerule.ru. About the selection criteria. This material is subjective in nature, does not constitute advertising and does not serve as a purchase guide. Before purchasing, consultation with a specialist is required.

A renovator is a multifunctional construction tool that will help you perform a number of operations. Its uniqueness is explained by its special operating principle. The working part (platform) moves from side to side with high frequency and small amplitude. By installing various equipment, you can perform operations such as cutting, milling, sanding, removing old paint, glue or rust. At the same time, it is possible to process a wide range of building materials in hard-to-reach places. A variety of renovators are presented in the country's stores; models differ in cost, power, and equipment. When choosing a tool, experts recommend paying attention to the following points.

How to choose a renovator

Specifications.

When choosing a renovator, you should take into account two important technical parameters.

1. The maximum vibration frequency of the platform in renovators varies from 10 to 25 thousand per minute. Since the tool has to perform different operations, the device must have frequency adjustment.
2. The performance of network renovators depends on the power of the installed electric motor. Most often, the tool is equipped with 200-600 W motors. This is enough to complete the assigned tasks.

Nutrition.

Renovators are electrical appliances that require current to operate.

1. Network models are connected to a household power supply with an alternating voltage of 220 V. The disadvantage of this type of tool is that it is tied to an outlet. But at the same time, networked renovators are distinguished by their long service life, productivity, lightness and affordable price.
2. The main advantage of battery models will be independence from the main current. The tool can be used far from civilization. But it should be borne in mind that the continuous operation time from a fully charged battery rarely exceeds 30 minutes. Many manufacturers standardize batteries, so the same battery can be installed on different power tools.

Additional functions

. Modern renovators are equipped with a number of additional options that make work comfortable.

1. The stabilization system allows you to maintain a given oscillation frequency at different load levels. This feature will help ensure high quality processing.
2. The built-in backlight will help you perform work in conditions with limited visibility.
3. Locking the power button frees the operator's finger, allowing the platform to oscillate at maximum speed.
4. Quick-release fastening (Velcro) speeds up the transition from one operation to another, simplifying the replacement of equipment.

We selected 17 of the best renovators for review. All these models can be purchased in the Russian retail chain. When allocating places, the editors of the simplerule magazine relied on the opinion of the expert community, taking into account feedback from domestic users.

Domestic or foreign

Often, when choosing a tool, we ask ourselves the question: “Which manufacturer should we give preference to, and whose products should we not consider at all?” There are many opinions on this issue, most of which are based on purely personal observation. One person may praise the renovator from China for its long service life, while another will denigrate the original Bosh for its sudden breakdown. Moreover, both of these people can operate the tool in different conditions and under different loads.

Regardless of the manufacturer, a multitool can serve for many years if you treat it with care, according to the instruction manual. Of course, Chinese underground models usually do not shine with quality, lag behind the declared characteristics and can break in the first stages of work. We will not focus on failed models, but will tell you about proven brands.

To purchase a tool with a guarantee that will have all the declared characteristics, it is best to contact an authorized dealer. When buying a renovator secondhand, on the market or in unknown online stores, there is a huge chance of running into a fake. When choosing a multitool from foreign brands, we recommend paying attention to the following companies: Makita, Bosh, Hammer, AEG and Fein. Domestic renovators of decent quality are produced by Enkor and SPEC companies. In the rating below, we present the most optimal models of multifunctional tools for household use.

Rating of the best renovators

Features of use

Renovator refers to compact and convenient auxiliary devices for small jobs around the house. It does not require any professional knowledge to start using. The only thing you need to figure out is the range of consumables. Even a person inexperienced in the construction craft can cope with sawing wood blanks, grinding and cutting metal.

When interacting with the device, the force of pressure, power or angle of inclination is not very important. All parameters can be customized for yourself by trying out different options. The principle of replacing blades using a hex wrench can be clarified in the instructions supplied with the device; rules for setting the speed will also be found there.

Expert opinion

Torsunov Pavel Maksimovich

In general, using the device is very simple and any recommendations may be required only at the beginning of mastering the multitool. With experience, efficiency and dexterity will already increase.

The best inexpensive renovators

Budget renovators can make life easier for the home handyman. They are available to a wide range of people, while allowing them to cut, grind, and clean workpieces and surfaces in hard-to-reach places. Experts advise paying attention to the following models.

BLACK+DECKER MT300KA

Rating: 4.7

The American brand BLACK+DECKER is famous for its developments in the field of power tools. The company's assortment includes a budget renovator BLACK+DECKER MT300KA, which is ready to perform various tasks. Experts attribute the movable cutting part to the advantages of the model. It allows you to work in hard-to-reach places. The tool combines power (300 W) and light weight (1.58 kg). The kit includes a case, fastening is carried out using Velcro. It is worth noting the rich package, which includes various accessories and adapters. Despite the Chinese assembly, the manufacturer provides a 5-year warranty on the renovator.

Domestic users liked the ergonomics of the product, the long power cord (3 m), and low vibration. The disadvantages include the lack of native equipment for sale.

Advantages

1. ergonomics;
2. quick release mount;
3. rich equipment;
4. 5 year warranty.

Flaws

1. There is no original equipment for sale.

DIOLD MEV-0.34 MF case

Rating: 4.6

The renovator DIOLD MEV-0.34 MF can also cope with a wide range of tasks. The household tool is equipped with a commutator electric motor that produces power at 340 W. The oscillation frequency is selected in the range of 15-21 thousand units/min. Using the model, you can saw wood, drywall, or plastic. A renovator can easily handle cutting nails or copper pipes. The kit includes a case, spare brushes, an additional handle and various accessories. The manufacturer only laid 9 pieces of sanding paper. Experts note the use of high-quality materials, thanks to which the tool operates without breakdowns for many years.

In RuNet, owners praise the renovator for its high-quality assembly, rich equipment, and metal gearbox. Users did not like the power button.

Advantages

1. high-quality assembly;
2. good power;
3. rich equipment;
4. low vibration.

Flaws

1. The button is too easy to turn on.

Enkor MFE-400E

Rating: 4.5

The most powerful machine in the budget segment was the renovator Enkor MFE-400E. The electric motor generates energy of 400 W, the frequency of vibrations per minute reaches 20,000. Experts liked the universal system for adapting interchangeable equipment; the tool is ready to work with both original attachments and Fein or Bosch products. To get into the most difficult to reach places, the attachments can be installed in a wide range of angles (up to 180 degrees). The electronics maintain a given oscillation frequency under load. Engine overload protection helps extend the life of the renovator. The product should include a rubberized handle and a reliable gearbox.

Users are satisfied with the power and spacious case. The disadvantages include hard wire and short-lived files.

Advantages

1. high power;
2. versatility of equipment use;
3. wide range of angles;
4. reliable gearbox.

Flaws

1. hard wire;
2. weak files.

Bort BMW-200-P

Rating: 4.4

The budget renovator Bort BMW-200-P is very popular in Russia. This conclusion was made by experts based on an analysis of user reviews. There are several reasons for the increased demand for the tool. Firstly, the model is sold at a low price. Secondly, it is exceptionally light (1.1 kg). At the same time, the manufacturer managed to make working parts from durable materials (mainly aluminum). The tool is inferior to the review leaders in power (200 W), although due to the high oscillation frequency (23,000 kol/min), it can cope with a number of everyday tasks. The model stops one step away from the prize podium.

In RuNet, the machine is praised for its low price, compactness, lightness and ease of use. The owners consider the disadvantage of the device to be noisy and lack of speed control.

Advantages

1. low price;
2. lightness and compactness;
3. ergonomics;
4. quality materials.

Flaws

1. noisy work;
2. no speed control.

Hammer LZK 200

Rating: 4.4

The Hammer LZK 200 model closes the top five best budget renovators. It is sold at the most attractive price, which is important when a tool is needed only for repairs in an apartment. The tool is equipped with a low-power electric motor (200 W), the oscillation frequency of the equipment reaches 21,000 kol/min. The manufacturer has provided the ability to connect a vacuum cleaner to the renovator. The equipment can be installed at an angle, which is convenient when working in hard-to-reach places. The handle fits securely in the hand thanks to the rubber coating. The electrical device weighs only 1.2 kg. The kit comes with attachments, but there is no case.

Users liked the price-quality ratio, but not every job is up to the tool. Complaints are caused by noisy operation and rapid heating of the engine.

Advantages

1. low price;
2. high-quality assembly;
3. compactness and lightness;
4. rubberized handle.

Flaws

1. noisy work;
2. The motor is heating up.

Areas of application of the multitool

Vibration properties, combined with a variety of attachments, allow the multitool to perform a wide range of work in the most inconvenient positions. The tool's high torque and power make it suitable for cutting and grinding the hardest materials, including steel. In terms of speed, the renovator lags significantly behind specialized devices, but it can perform their function.

The multifunctional tool is used mainly in small-scale decorative work. It can be used for cleaning tile joints, cutting wood, metal profiles, nails, pipes, grinding and polishing straight and concave surfaces. It is best to use a renovator on concrete with a carbide-coated nozzle, while a diamond nozzle is better for tiles.

The versatility of a multitool depends on the attachments. Given the necessary blades, a corded or battery-powered renovator can handle a wide variety of tasks. From delicate sealant removal to heavy-duty cutting of metal pipes, the right accessories will add the functionality you need to your machine. There is a special article on our website that describes in detail what types of renovator attachments there are and for what purposes they are used.

The best network renovators

For work in a house, garage or workshop, it is better to give preference to network renovators. They combine an affordable price and good power. At the same time, many models are lightweight, and the power cord is long enough for short operator movements. Experts selected the following tool for review.

DeWALT DWE315KT

Rating: 4.9

The development of the famous American company DeWALT called DWE315KT is a universal professional-level tool. A renovator can cut wood or metal, grind the surfaces of workpieces, and remove old paint or rust. Experts liked the combination of power (300 W) and light weight (1.475 kg). The kit comes with a good quality case and a large number of attachments. The product should include a decent set of modern functions, starting with keyless attachment of attachments and ending with electronic speed control. The rubberized handle provides a comfortable and safe grip. The renovator is equipped with equipment from other manufacturers.

The owners speak flatteringly about the quality of workmanship, the long soft wire, and the smooth start-up. The downside of the model is the high price.

Advantages

1. versatility;
2. high-quality manufacturing;
3. comfortable grip;
4. spacious case.

Flaws

1. high price.

BOSCH PMF 350 CES

Rating: 4.8

The well-known German company BOSCH has a multifunctional renovator PMF 350 CES, which has a number of advantages. It surpasses the winner of our review in power (350 W), while the cost of the device is lower due to the Hungarian assembly. Experts liked the smooth adjustment of the oscillation frequency in the range of 15-20 thousand kol/min, thanks to which it is possible to select optimal processing modes. LED backlight helps to work in poor visibility conditions. Cutting accuracy is ensured by a 4-stage depth limiter. The stabilization system is designed to maintain a given oscillation frequency under load.

In reviews, consumers note such advantages of the tool as soft start, convenient lighting, and durable equipment. I didn’t like the sanding shoe, the sand tends to come off from it.

Advantages

1. high-quality assembly;
2. high power;
3. smooth start;
4. convenient lighting.

Flaws

1. The skin does not stick to the sole.

Metabo MT 400 QUICK

Rating: 4.8

The Metabo MT 400 QUICK renovator successfully combines high power (400 W) and lightness (1.4 kg). German developers have limited the platform's oscillation frequency per minute to 18,500. The network device is well equipped, a smart system maintains speed when working under load, the oscillation frequency is adjustable, the power button, as well as the spindle, can be locked. Experts liked the convenient change of equipment and the effective anti-vibration system. Although the equipment is not the richest, the set includes a good-quality case, an adapter for a vacuum cleaner, a multi-adapter, 3 saw blades and 10 sandpapers. The instrument wins bronze in our review.

On thematic forums, the renovator received many flattering words for its power, long cable, and convenient replacement of panels. The downside is the noisy operation.

Advantages

1. light weight;
2. high power;
3. rich equipment;
4. long wire.

Flaws

1. noisy work.

DeWALT DWE315

Rating: 4.7

The DeWALT DWE315 renovator is very popular among Russian craftsmen. Experts attribute the popularity of the model to a successful combination of price and quality. In addition, the instrument is perfectly balanced. It has enough power (300 W) to perform various operations. At the same time, the operator does not get tired, since the weight of the product is 1.475 kg. The rubberized handle provides a comfortable grip. The equipment also looks rich. There are 25 sheets of sanding paper alone; there is also a scraper blade and equipment for cutting wood with nails.

Domestic consumers liked the versatility of using the equipment, the accuracy of processing, and the quick change of attachments. The disadvantage of this model is that the head is extended forward, which creates inconvenience when grinding with a triangle.

Advantages

1. quick change of attachments;
2. effective lighting;
3. long cord;
4. ergonomics.

Flaws

1. It is inconvenient to grind with a triangle.

Makita TM3000C

Rating: 4.7

Reliability and durability helped the Japanese renovator Makita TM3000C take an honorable fifth place in our review. The manufacturer provides a 5-year warranty on its product, which is an indirect confirmation of high quality. The model is equipped with a 320 W electric motor; paired with a gearbox, they produce minimal noise. Experts note the affordable price and lightness (1.4 kg) of the model. The renovator looks modern, the speed is supported by a stabilization system, the oscillation frequency is adjustable, and the power button is easy to lock.

In the reviews you can find many positive assessments of the renovator’s performance. Users are satisfied with the ergonomics and lightness, quiet operation and secure grip, low price and good equipment. The disadvantages include the lack of lighting and expensive equipment.

Advantages

1. affordable price;
2. ease;
3. ergonomics;
4. quiet work.

Flaws

1. no backlight;
2. expensive equipment.

Which multi-tool is better?

Some of the most common are BOSCH and MAKITA models. These manufacturers have long established themselves in the tool market and offer a wide range of renovators.

For example, the MAKITA DTM50RFE(X1) model is perfect for finishing work. A large selection of attachments and built-in lighting ensure high efficiency and speed of operations. The tool is protected from overloads and allows you to smoothly adjust the speed, which reaches up to 20,000 per minute.

The BOSCH company does not lag behind its competitors and produces no less functional tools. Thus, the BOSCH GOP 10.8 V-LI 1.5 Ah model is equipped with 36 nozzles. For example, one of them can easily remove tile adhesive. The attachments can be adjusted in 30° increments. A modern Li-Ion battery and fast charger ensure comfortable and fast operation of the tool. Oscillation frequency - 5000-20000 rpm.

When choosing a multifunctional tool, focus primarily on your tasks. For use once every one or two months, feel free to take a simple household model - all the necessary functions are there, there is no overpayment. If you plan to do more frequent and complex work, take a more impressive model - with an expanded set of equipment, a flexible shaft for precise work and additional features (keyless change of attachments, backlight).

This tool can saw, cut, grind, polish, clean, sharpen and perform many other operations with wood, plastic, metal, concrete, brick, fiberglass, laminate, tile, rubber, etc., and with a fairly high quality of processing.

Thanks to its small size, convenience and versatility, it can replace some common tools, such as: a hacksaw, a jigsaw, a chisel, an angle grinder, scissors, a sander, a sharpener, etc. It is convenient to use, since cuts are made by submersion anywhere, which allows make neat corners, curved lines, openings and work flush, close to the obstacle, in corners and niches.

The device is highly safe because there is no centrifugal ejection of material, kickback, kickback or rupture of equipment, and accidental and unintentional contact with a working tool does not lead to injury or tragedy. It is also so easy to use that you can work with it right away, gaining skill as you gain experience.

I think that everyone has already guessed that we are talking about a renovator or a vibration universal machine (aka an oscillator, a universal cutter, a multifunctional tool, an electric chisel, a multitool). As soon as he is not yet called, all the names except the first require some further explanation, and only the first is immediately clear, so in the people's memory he will still remain a renovator (however, the same thing happened with the copier and diaper). Moreover, this is not a hybrid of several familiar tools, it is a separate type, the operating principle of which is based on very fast oscillations (vibrations) of the drive, but with a very small scope. Thus, renovators can become the best assistants both in the home workshop and on the construction site, especially in those moments when accuracy, jewelry precision, or work in a very cramped and inaccessible place are required.

So, let's try to understand the many existing models of renovators and consider their differences from each other.

Characteristics

The greater the power of the renovator, the greater its instantaneous torque and, as a result, the productivity and time of continuous operation without overheating with materials that are difficult to process. For soft materials (plasterboard, plastic, linoleum, etc.) or short-term work, a power of 100-200 W is sufficient. For professional applications, power values ​​above 200 W are required (when working with tiles, stone and concrete 300-350 W).

It is worth noting that vibrating tools are always inferior in performance to rotary and reciprocating models, so they are usually used as an addition to other specialized equipment.

The angle of oscillation or tilt to the right and left differs slightly between different models and is about one and a half degrees in each direction. This is primarily due to the safety of the tool, since at such low values, unintentional contact with the working edge is safe for humans.

The oscillation frequency is almost always adjustable and, depending on the type of surface being treated, can reach 35,000 movements per minute. Thus, cutting and sawing hard materials, such as concrete and metal, is performed at high speed, scraping at medium speed, and processing plastic, soft wood, foam plastic, etc. at low speed (to avoid scorching and melting of workpieces). The frequency setting can be placed either in a separate regulator or combined with the trigger - the choice of option is often a matter of taste and skill.

Nutrition

Renovators produce both mains-powered and battery-powered ones. The former are usually more powerful, more efficient, more reliable and more suitable for long-term operation, while the latter are indispensable in places with unstable or no power supply.

Currently, the vast majority of autonomous renovators are produced with Li-Ion batteries. This is due to the fact that, compared to models made using other technologies, they store several times more energy with the same volume of the battery itself (higher energy density), charging is possible at any time, since they do not need to be completely discharged (there is no memory effect ) and they have low self-discharge, but there are also disadvantages: they are afraid of violations of operating conditions (deep discharge and overcharging), they need complex protective electronics, they do not hold high currents well, they do not work in the cold, they are charged only from their own chargers, they have very the effect of aging (degradation) is strongly pronounced and the full charge rate is not very high.

The battery capacity determines how long the tool can work autonomously. It is measured in ampere hours or watt hours. The cheaper the tool, the less the capacity of the batteries installed in it and, accordingly, the operating time, and vice versa.

The voltage of a complete battery depends on the number of standard cells included in its composition and, accordingly, has a step that is a multiple of their number. The more of them and the higher the voltage, the longer the tool will work with the same battery capacity, since the stored energy is greater.

As for the dependence of power on battery voltage, in this case it is only indirect. This is explained by the fact that it is easier and cheaper for the manufacturer to produce a powerful tool with a high battery voltage, since otherwise it would be necessary to use more expensive motors, high-current batteries, and larger diameter conductors. The only disadvantage of batteries of higher voltage will be larger dimensions and heavier weight.

Nozzles

The multifunctionality of renovators is based on a wide variety of replaceable attachments, with the help of which the number of available operations is expanded. Their shape is chosen to suit the tasks assigned to the user, and the material from which they are made is optimized for a specific surface. Most attachments can be installed at different angles. To make the choice easier, manufacturers most often indicate the purpose of each attachment and recommended rules for working with them. Their assortment is huge: spatulas, blades, saws, knives, abrasives, and the number of new ones is only multiplying. The wear resistance of attachments, as a rule, correlates with their cost (sometimes exceeding the price of the tool itself), but correct and appropriate use is the best way to increase the duration of use (for example, a corundum chisel for jointing can go several hundred meters before it is completely thinned, and a metal file will be erased in concrete after a couple of meters).

Often, attachments are grouped into special sets for a specific application (plumbing, decoration, windows, auto repair shop, garden, etc.)

Replacement of equipment can be done using a key or quick-clamping method. The first is cheaper and simpler, while the dimensions of the unit itself are minimal (very important when working in narrow and hard-to-reach places), but it takes longer, since a worn or non-profile nozzle can only be replaced by unscrewing the fasteners. With another method, you just need to install and fix the nozzle by turning the lever, but, as a rule, the lever increases the weight and size of the tool itself. The safety of both fastening methods is satisfactory.

In most cases, equipment from different manufacturers is interchangeable directly or through an adapter (only in models with a quick-release fastening mechanism may incompatibility occur).

The best battery renovators

The most mobile renovators are battery-powered models. With their help you can cut, grind or mill away from the mains. It’s a pity that the continuous operation time on a single charge is limited to 15-30 minutes. The following models have proven themselves well in Russia.

BOSCH AdvancedMulti 18 2.5Ah

Rating: 4.9

The German renovator BOSCH AdvancedMulti 18 is capable of speeding up repair work. Experts appreciated the AutoClic system, thanks to which it is possible to quickly change equipment. This saves time on preparatory and final operations. The tool is powered by an 18-volt battery. By the way, an important point will be the possibility of using a battery from another BOSCH tool. The recommended battery capacity is 2.5 Ah. The model is equipped with a case, a two-position handle, a depth limiter, and a sanding pad. The renovator is the winner of our review.

Users highly appreciated the lightness (1.4 kg), mobility, charge indicator and backlight. They consider the disadvantage to be an inconvenient connection to the vacuum cleaner.

Advantages

1. quick change of equipment;
2. universal battery;
3. good equipment;
4. fast memory.

Flaws

1. The vacuum cleaner is difficult to connect.

Makita DTM51Z

Rating: 4.8

A wide range of work can be performed by the Japanese renovator Makita DTM51Z. The cordless model allows you to sand, cut, polish, deburr or carve. The tool is powered by an 18-volt battery, but it is not always included, as is a charger. The battery can be borrowed from another Makita tool. The machine is not inferior to the review winner in terms of equipment and performance. The oscillation frequency is adjustable in the range of 6-20 thousand kol/min, for comfortable operation there is a soft start and LED backlight. The power button and spindle can be locked.

Experts, as well as users, liked the keyless change of equipment and smooth adjustment of the oscillation frequency. They consider the disadvantages of the model to be heavy weight (2.2 kg) and noticeable vibration.

Advantages

1. versatility;
2. high performance;
3. equipment changes quickly;
4. good equipment.

Flaws

1. heavy weight.

DeWALT DCS355N 0

Rating: 4.7

The most popular battery renovator in our review was the DeWALT DCS355N 0 model. The tool has such advantages as an affordable price, high-quality assembly and a comfortable grip. The machine develops a maximum platform vibration frequency of up to 20 thousand per minute. The kit does not include a battery or charger, but these important components will fit from other DeWALT devices. Experts are pleased with the compactness and ergonomics of the renovator. During operation, the device does not cause problems with vibration; it is well balanced, so even a decent weight (1.68 kg) is not felt. The combination of all these advantages helped the product take an honorable third place on the podium.

In general, users are satisfied with the performance of the renovator. Some users do not have enough adapter to connect the vacuum cleaner.

Advantages

1. high-quality assembly;
2. compactness;
3. ergonomics;
4. brushless motor.

Flaws

1. no adapter for vacuum cleaner.

BOSCH UniversalMulti12 0

Rating: 4.7

The German BOSCH UniversalMulti12 0 tool can attract potential buyers with its low price. Experts advise only to take into account that a 12-volt battery is required as a power source. While losing in power to the leaders in the review, the renovator looks more advantageous in terms of weight (1.1 kg). It will be more convenient when working at arm's length. The manufacturer has equipped its product with illumination of the working area, a speed stabilization system, and adjustment of the oscillation frequency. The kit does not include a battery or charger, but there is a sanding pad, a depth stop, a set of sandpapers and 2 durable files.

User reviews report that they really enjoy working with the tool. The renovator combines lightness and mobility. But continuous operation time is limited to 25 minutes.

Advantages

1. lightness and mobility;
2. good equipment;
3. built-in lighting;
4. quick change of equipment.

Flaws

1. short time of continuous operation.

Criterias of choice

To choose a suitable renovator model, you need to consider the following points:

Each criterion must be taken into account when choosing a future renovator

The best professional renovators

Professional renovators are distinguished by their power, durability and ease of use. Accordingly, they cost more. Our review included both mains-powered and battery-powered models for craftsmen.

BOSCH GOP 55-36 L-BOXX

Rating: 4.9

Despite the fact that the German renovator BOSCH GOP 55-36 L-BOXX is an expensive tool, the demand for it in our country remains at a high level. Experts highlight such advantages of the network model as power (550 W), large oscillation angle (18 degrees), and a convenient mechanism for fixing the attachments. The number of oscillations is adjustable from 8 to 20 thousand per minute. The high price is due not only to the excellent quality of the renovator, but also to the rich equipment. The set includes a branded suitcase, 25 sanding sheets, 2 sanding pads, 6 plunge-cut saw blades, 2 segmented saw blades. The device deservedly heads the TOP of the best professional renovators.

Russian craftsmen praise the device for its power and ease of use, reliability and rich equipment.

Advantages

1. high-quality manufacturing;
2. convenient mechanism for fixing attachments;
3. rich equipment;
4. reliability.

Flaws

1. not detected.

Milwaukee C12 MT-402B

Rating: 4.9

Several innovative technologies were introduced by the American power tool manufacturer Milwaukee in the manufacture of the C12 MT-402B renovator. These are improved REDLITHIUM-ION batteries, they last twice as long on a single charge, delivering greater power and longer service life. At the same time, a 12-volt battery with a capacity of 4 Ah remains operational even in 20-degree frost. REDLINK overload protection effectively protects the tool from damage. Experts pay attention to the compatibility of the device with accessories from other companies. The product should include a rich set of components; the renovator comes with two batteries, a charger and a set of attachments.

The model has not yet been tested by domestic craftsmen, so it takes second place in the review.

Advantages

1. 2 batteries;
2. durability;
3. high power;
4. frost resistance.

Flaws

1. there are no reviews in RuNet.

Metabo MT 18 LTX Compact 2.0Ah x2 Case Set

Rating: 4.8

The Metabo MT 18 LTX Compact model closes the top three best professional renovators. The cordless tool is sold with two 18-volt batteries with a capacity of 2 Ah; the indication allows you to monitor the charge level. Experts appreciated the Ultra-M technology, thanks to which high power was achieved. The battery pack has a 3-year manufacturer's warranty. The double LED light effectively illuminates the work area. The constant oscillation frequency of the platform is provided by VTC electronics. There is an adapter for connecting the vacuum cleaner. The product should include keyless replacement of equipment as an asset.

Domestic consumers praise the tool for its good packaging, power adjustment, and effective lighting. But during intensive use, the tool gets hot.

Advantages

1. rich equipment;
2. effective lighting;
3. good power;
4. quick change of equipment.

Equipment options

If you need a multitool to perform a narrow range of work, then it is better to buy a set with a minimum number of basic attachments, and then purchase additional equipment if necessary.
The renovator can have 2-40 replacement blades, the set depends on the manufacturer. Accessories come in the following types:

• Triangular grinding plate . Available in different grain sizes. It is used to clean the surface from dirt and residues of finishing solutions, glue, as well as for fine grinding.
• Cutting knife with double-sided blade . Allows you to cut and trim rubber, cardboard, linoleum, foam plastic, leather.
• Scraper - removes stubborn dirt from construction compounds: polyurethane foam, sealant, paint, cement, glue.
• Semicircular cutting disc with diamond coating . Suitable for cleaning seams between tiles, cutting ceramics, stone, brick.
• Standard cutting disc . Used for workpieces made of wood, plastic, plasterboard, cutting holes and grooves.