What are the different attachments for multi-tools?

One of the interesting new products in recent years on the market of household and professional tools has been the renovator or multitool. It is an electrically driven device capable of performing a large number of technological operations required in the process of construction, repair and processing of solid materials. Its versatility is given by interchangeable attachments of various shapes and purposes, performing oscillatory movements with high frequency with a small amplitude of movement. This article is devoted to their brief description and comparison of functionality.

Wood bits

Wood is one of the most common materials in construction and finishing work, and therefore wood attachments for renovators vary depending on the specific operation with wood:

• for cutting wood, a cutting disk of a spade-shaped, rectangular or other complex shape, called a saw blade, is useful - its functions include plunge-cutting or other sawing not only of wood, but also of other materials (plastic, soft metal, etc.);
• a segmented saw blade has the shape of an incomplete circle, often with a cut edge or with part of a segment of complex shape; sometimes manufacturers complete their multifunctional tools with a full-circle blade;
• for cutting work with wood, you may also need a depth limiter - with its help you can make cuts of certain sizes even without visual control, which will be especially important for hard-to-reach places;
• The rasp disk and sanding pad are used for rough processing of wood and removing large burrs.

For cutting metal

One of the slowest jobs with a multifunctional tool is cutting metal parts. In terms of the speed of “biting” into the material, the renovator is several times behind the grinder, so for such purposes it is used only in the most extreme situations. Typically, a multitool is used to cut protruding nails flush, drywall profiles, small pipes (up to 30 mm) or damaged car body parts. To work with metal more or less confidently, the tool must have at least 300 W of power, otherwise it will jam and heat up.

How to choose a renovator?

Purchasing a tool should be considered carefully

It is recommended to pay attention to the following characteristics:

Type of food. There is mains and battery. For work in the workshop, the first option is suitable, and in all other cases the second. In any case, the optimal operating mode: 15 minutes. work and 10 min. recreation.

Power. The multitool network tool has a rating of 200-500 W. The battery for home use has a power of 12 W, and the professional battery has a power of 18 W.

Oscillation frequency. At high speeds they work with soft materials, at low speeds they saw and grind hard products.

Speed ​​controller

Important for working with different materials that require different nozzle movements.

Maintains constant speed. Feature that helps you maintain the same pace of work

The installed constant electronics ensures a constant speed of work as the load increases.

Attaching the nozzle. Renovator is a device that has two types of connection: manual fixation with a key and a quick-release device. The first option is suitable if the nozzles are changed rarely, the second if they are changed frequently.

In addition, it is recommended to pay attention to the following additions to the renovator:

• electronic speed control;
• smooth start;
• Possibility of connecting to a vacuum cleaner;
• soft pads on the handle.

https://youtube.com/watch?v=Lf4tYPVzBPA%250D

Attachments for renovator

These consumables vary depending on the tasks assigned to them. The multifunctional tool can be equipped with the following types of attachments:

• triangular plate with Velcro;
• carbide pad for polishing;
• semicircular nozzles with diamond chips for metal and concrete;
• immersion sheets with teeth at the end;
• scrapers for scraping linoleum or silicone;
• knives with double-edged blades for scoring;
• attachments for attaching narrow blades and threads.

https://youtube.com/watch?v=Eq9TBqbFelw%250D

Pros and cons of a renovator

I would like to start right away with the positives. If you imagine for a moment how this tool was created, it will become clear that all known power tools were taken to create it. All their shortcomings were removed , and this is how a renovator turned out.

1. Can do work with increased precision.
2. It is absolutely safe.
3. It is lightweight, allowing you to hold it with one hand.
4. Ability to work in inconvenient places.
5. Connecting a vacuum nozzle makes the workplace absolutely clean.

Now about the shortcomings, unfortunately, there are also plenty of them.

1. The price is a little high.
2. It makes a lot of noise when working.
3. Quite a lot of fakes are sold.
4. If you increase accuracy, the speed of work will decrease.
5. It is not recommended to work for a long time.

What a multitool can do

Here are some MFI opportunities:

• cable channels are being installed for them;
• cut installed sewer pipes and internal wall reinforcement;
• remove deposits of plaster, glue, polyurethane foam, and clean off paint;
• peel off linoleum from the floor;
• file nails and screws flush;
• remove grooves in wood and drywall from the end and mortise (submersible);
• cut sheet elastic materials and soft seals;
• trim skirting boards, fillets and cornices in place;
• unstitch the seams on the laid tiles and cut the tiles themselves;
• trim installed door frames;
• grind complex surfaces and hard-to-reach internal corners;
• sharpen tools.

Let us now clarify what a renovator is. Professionals give it the following definition: a tool of last resort. It is indispensable as an auxiliary construction tool at the final stages of work or during remodeling. And when used at home, a multitool will completely save you from buying several power tools.

Comments2 comments

1. Anton:
   04/04/2017 at 08:56

   Despite the fact that the renovator is a universal tool, there is no need to consider it as a professional one, since it is only suitable for home needs. We bought a renovator and are happy with it so far, but only if we use branded attachments and not Chinese ones. Chinese ones are suitable for working on wood and plastic, but for metal and tiles you only need branded attachments. For carpentry work, this is an indispensable thing; for working in corners, it’s just a super find; it’s great for removing varnish, old paint, and sanding. I can’t say anything about durability and reliability; we haven’t been using it for long.

2. Igor:

   07/30/2017 at 19:07

   There are differences from advertising. The noise is like a circular machine. It wakes up the dead. Vibration like a sander. The possibilities are not great.

Types of multitools

This type of tool is divided into different options according to many criteria. According to the type of power supply, a universal tool can be:

1. Rechargeable
   . A stand-alone option that can be used anywhere you need.
2. Network
   . Allows you to use the device for as long as you want, but due to the wire it has restrictions on movement.

According to power level, the division occurs into:

• household – up to 100 W;
• semi-professional – up to 300 W;
• professional – above 300 W.

By type of attachment attachment:

• using a hex key;
• modern clamps;
• thanks to the universal adapter.

Which renovator is better, corded or battery-powered?

These two types have both advantages and disadvantages. Before making your final choice, you need to get to know them in more detail. The battery renovator has the following advantages:

1. Ability to work autonomously anywhere you need. An additional convenience is the absence of a cable, which not only interferes with work, but also limits movement.
2. The tool makes little noise.

Network renovators have the following advantages:

1. Electrical operation allows you to use the tool for the desired amount of time without any worry about turning off at the wrong time.
2. The tool is equipped with a high-power motor, which helps it work faster.
3. At the same time, such a renovator weighs less, but needs rest to avoid overheating and, as a result, failure.
4. The compactness of the case helps to use the device in the most difficult to reach places.

Compatibility

At the moment, there is no single specification for the nozzle fastening system - each manufacturer creates what he likes. The consumable itself is no different, just the location of its attachment may have slight differences from manufacturer to manufacturer.

There is nothing wrong with this, but you should take this into account when purchasing. There are also universal attachments that fit most multi-cutter. Some devices are more “omnivorous”, some less so. Almost every manufacturer has adapters that allow you to use “foreign” attachments.

Perhaps, over time, manufacturers will still come to some kind of standard, but for now, if you are not sure, then there is no shame in coming to the store with a device or an old attachment and “trying it on.”

Nuances of choice

Depending on the manufacturer and supplier, the equipment of a multifunctional tool can be supplemented with interchangeable attachments for one purpose or another. Among them there may be additions that are identical in purpose, differing only in dimensional parameters, or removable elements designed to perform work of a different nature.

When purchasing a renovator, it is important to pay attention to the quality of the tool itself. The duration of its uninterrupted operation will depend on the name of the manufacturer and the originality of the brand indicated on the specific packaging

The presence of an initial list of attachments is explained by the manufacturer’s desire to attract potential customers. Therefore, when purchasing a renovator, it is worth taking this fact into account and having the opportunity to purchase replacement elements from a third-party manufacturer.

First of all, it is worth determining the name of the target work, the implementation of which will be carried out using a multifunctional tool. This will save money on the purchase of add-ons and also ensure the best production workflow.

It should also be remembered that in order for the renovator to carry out the same working manipulation, nozzles of various configurations, classes and sizes can be used. Taking this into account, it is necessary to make a detailed assessment of the proposed work and draw appropriate conclusions in favor of one or another attachment.

In some cases, the right solution would be to purchase a specialized set containing renovator additions for various purposes. This is relevant for those who are engaged in construction and other technical work on an ongoing basis.

Attachments produced by multifunction tool manufacturers as a separate product line have better quality characteristics than complete items.

In this regard, it is worth paying attention to individual units and sets of add-ons supplied by reputable companies

High quality class:

• Bosch;
• Hilti;
• Makita.

Average quality class:

• "Interskol";
• "Bison";
• "Specialist".

Before purchasing a renovator or a removable addition to it, you need to familiarize yourself with the list of their modifications and target properties.

Nozzles designed for sawing soft materials (wood, plastic, composite and others) are equipped with teeth, the size of which may vary depending on the shape of the nozzle and its purpose. The location and shape of the teeth do not suggest the presence of a divorce. Common configurations of such add-ons are shown in the photo.

There are nozzles for concrete and metal. Their working properties are ensured by a diamond cutting edge consisting of high-strength components. They come in saw and plunge-cut types. The latter allow you to cut closed holes in concrete, metal and ceramics while maintaining high accuracy. Some options for such attachments are shown in the photo.

For processing wooden and other soft surfaces, nozzles in the shape of a triangle are used, the sides of which have a rounded profile. They can be equipped with a non-removable abrasive coating, as well as a special Velcro, which allows you to replace the sanding cloths with cloths of a different grain size without changing the attachment itself.

When choosing removable attachments for a renovator, you need to take into account the compatibility of certain attachments with the fastening mechanism of this tool. Its models, produced by different manufacturers, can be equipped with fastening mechanisms with individual design characteristics inherent in the devices of this manufacturer.

In their list, one can note the presence of a description of the functional features of the add-on, information about the manufacturer and supplier, dimensional characteristics, which determine the possibility of use in combination with a particular model of the renovator.

To learn how to choose a renovator and what to look for when purchasing, watch the following video

Making a nozzle for a renovator with your own hands

The described method allows you to make an excellent, durable saw for wood and plastic; more about metal a little later.

1. We buy a high-quality woodworking hacksaw with a fine tooth in the store. As a rule, it has high quality steel and, most importantly, a wide blade, which allows us to fully restore the nozzle, including its length.

2. Mark the hacksaw blade along the width of the nozzle and cut it into blanks using a grinder. This saw will make 7 of them.

3. Cut off the working part from the original nozzle.

4. Mark and drill 2 mounting holes in it. First we use a 1.5 - 2 mm drill.

5. We release the back part of the blanks from the file, heating it with a gas burner until it glows crimson and allowing it to cool in the air.

6. We mark the holes, aligning them with the prepared part of the standard nozzle, and drill them, using drills sequentially: first, the same as when drilling the shank of the nozzle, and then with a diameter of 6 mm. Using the same drill, we enlarge the holes in the shank.

7. After drilling and marking, we bend the released part of our blanks to an angle slightly less than that of the standard tool. We connect both parts using short M6 bolts - the angle will be leveled.

Such an attachment will serve you for a long time no worse than a standard one from a good manufacturer; it will cost at least 5–6 times less, taking into account the cost of a hacksaw and 6 spare working surfaces. And it will do its job just as well as a purchased one, or even better.

Yes, do not forget about the possibility of repeated sharpening, which is provided by the manufacturer of the hacksaw that served as the donor of the blades.

Lastly. For metal, you can also take a good hacksaw blade, cut it into pieces and carefully weld it to the base, removing the worn part

Here it is important to weld the blade with teeth efficiently and without overheating and carefully process the thickness of the seam

Dear readers, if you have any questions, please ask them using the form below. We will be glad to communicate with you